Analytic roughness prediction by deep rolling

Deep rolling is a widely applied mechanical surface and subsurface treatment method. It is typically used after conventional machining to improve the roughness, increase the surface hardness and to induce compressive residual stresses. The main influence parameters on the surface topography are the applied deep rolling pressure, the ball diameter and the feed. In general, low feeds, larger ball diameters and higher pressures result in an even surface finish. However, an exact prediction of the roughness is not possible. Therefore, it is the aim of the presented research to find a generally applicable method for surface roughness prediction after deep rolling for a variety of steel and aluminum materials. It is shown that the surface topography can be predicted by an analytical model with high accuracy

Correlation between process load and deep rolling induced residual stress profiles

Deep rolling is often used as a finishing step after cutting because of its beneficial influence on surface and subsurface properties, which lead to an increase in performance and lifecycle behavior. This manufacturing process is suitable to reduce roughness and to induce compressive residual stresses. As thermal effects only play a minor role in the deep rolling process, it is possible to link the resulting residual stresses to the analytically determined internal process loads. The boundaries of these relationships are investigated on hardened AISI 4140 using different mechanical loads and overlap factors

Correlation between process load and deep rolling induced residual stress profiles

Deep rolling is often used as a finishing step after cutting because of its beneficial influence on surface and subsurface properties, which lead to an increase in performance and lifecycle behavior. This manufacturing process is suitable to reduce roughness and to induce compressive residual stresses. As thermal effects only play a minor role in the deep rolling process, it is possible to link the resulting residual stresses to the analytically determined internal process loads. The boundaries of these relationships are investigated on hardened AISI 4140 using different mechanical loads and overlap factors

Neurotransmitter evaluation in the hippocampus of rats after intracerebral injection of TsTX scorpion toxin

TsTX is an a-type sodium channel toxin that stimulates the discharge of neurotransmitters from neurons. In the present study we investigated which neurotransmitters are released in the hippocampus after TsTX injection and if they are responsible for electrographic or histopathological effects. Microdialysis revealed that the toxin increased glutamate extracellular levels in the hippocampus; however, levels of gamma-aminobutyric acid (GABA), glycine, 5-hydroxyindoleacetic acid (5-HIAA), homovanillic acid (HVA) and 3,4-dihydroxyphenylacetic acid (DOPAC) were not significantly altered. Neurodegeneration in pyramidal cells of hippocampus and electroencephalographic alterations caused by the toxin were blocked by pretreatment with riluzole, a glutamate release inhibitor. The present results suggest a specific activity of TsTX in the hippocampus which affects only glutamate releas

Exploring orbital-charge conversion mediated by interfaces with copper through spin-orbital pumping

We investigated how different materials affect the orbital-charge conversion in heterostructures with the naturally oxidized cooper capping layer. When we added a thin layer of $CuOx(3nm)$ onto yttrium iron garnet $(YIG)/W$ stacks, we observed a significant reduction in the charge current signal measured by means the spin pumping effect technique. This finding contrasts with the results of a prior study conducted on YIG/Pt/CuOx, which reported the opposite effect. On the other hand, when we added the same $CuOx(3nm)$ layer to $YIG/Ti(4nm)$ structures, there was not much change in the spin pumping signal. This occurred because Ti does not generate much orbital current at the $Ti/CuOx$ interface, unlike Pt, due to its weaker spin-orbit coupling. Interestingly, when we added the $CuOx(3nm)$ layer to $SiO_{2}/Py(5nm)/Pt(4nm)$ structures, the spin pumping signal increased. However, in $SiO_{2}/CuOx(3nm)/Pt(4nm)/Py(5nm)$ structures, the signal decreased. Finally, we delve into a theoretical analysis of the spin (orbital) Hall effect in YIG/Heavy-metal systems. These findings have the potential to advance research in the innovative field of orbitronics and contribute to the development of new technologies based on spin-orbital conversion.Comment: 21 pages, 6 figures

Prospection and Evaluation of (Hemi) Cellulolytic Enzymes Using Untreated and Pretreated Biomasses in Two Argentinean Native Termites

Saccharum officinarum bagasse (common name: sugarcane bagasse) and Pennisetum purpureum (also known as Napier grass) are among the most promising feedstocks for bioethanol production in Argentina and Brazil. In this study, both biomasses were assessed before and after acid pretreatment and following hydrolysis with Nasutitermes aquilinus andCortaritermes fulviceps termite gut digestome. The chemical composition analysis of the biomasses after diluted acid pretreatment showed that the hemicellulose fraction was partially removed. The (hemi) cellulolytic activities were evaluated in bacterial culture supernatantsof termite gut homogenates grown in treated and untreated biomasses. In all cases, we detected significantly higher endoglucanase and xylanase activities using pretreated biomasses compared to untreated biomasses, carboxymethylcellulose and xylan. Several protein bands with (hemi) cellulolytic activity were detected in zymograms and two-dimensionalgel electrophoresis. Some proteins of these bands or spots were identified as xylanolytic peptides by mass spectrometry. Finally, the diversity of cultured cellulolytic bacterial endosymbionts associated to both Argentinean native termite species was analyzed. This study describes, for the first time, bacterial endosymbionts and endogenous (hemi) cellulases of two Argentinean native termites as well as their potential application in degradation of lignocellulosic biomass for bioethanol production.Fil: Ben Guerrero, Emiliano. Instituto Nacional de Tecnología Agropecuaria. Centro de Investigación en Ciencias Veterinarias y Agronómicas. Instituto de Biotecnología; ArgentinaFil: Arneodo Larochette, Joel Demián. Consejo Nacional de Investigaciones Científicas y Técnicas; Argentina. Instituto Nacional de Tecnología Agropecuaria. Centro de Investigación en Ciencias Veterinarias y Agronómicas. Instituto de Microbiología y Zoología Agrícola; ArgentinaFil: Bombarda Campanha, Raquel. Ministerio da Agricultura Pecuaria e Abastecimento de Brasil. Empresa Brasileira de Pesquisa Agropecuaria; BrasilFil: Oliveira, Patrícia Abrão de. Ministerio da Agricultura Pecuaria e Abastecimento de Brasil. Empresa Brasileira de Pesquisa Agropecuaria; BrasilFil: Labate, Mônica T. Veneziano. Universidade de Sao Paulo; BrasilFil: Cataldi, Thaís Regiani. Universidade de Sao Paulo; BrasilFil: Campos, Eleonora. Instituto Nacional de Tecnología Agropecuaria. Centro de Investigación en Ciencias Veterinarias y Agronómicas. Instituto de Biotecnología; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas; ArgentinaFil: Cataldi, Ángel Adrián. Instituto Nacional de Tecnología Agropecuaria. Centro de Investigación en Ciencias Veterinarias y Agronómicas. Instituto de Biotecnología; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas; ArgentinaFil: Labate, Carlos A.. Universidade de Sao Paulo; BrasilFil: Rodrigues, Clenilson Martins. Ministerio da Agricultura Pecuaria e Abastecimento de Brasil. Empresa Brasileira de Pesquisa Agropecuaria; BrasilFil: Talia, Paola Monica. Instituto Nacional de Tecnología Agropecuaria. Centro de Investigación en Ciencias Veterinarias y Agronómicas. Instituto de Biotecnología; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas; Argentin