27 research outputs found
The application of ANFIS prediction models for thermal error compensation on CNC machine tools
Thermal errors can have significant effects on CNC machine tool accuracy. The errors come from thermal deformations of the machine elements caused by heat sources within the machine structure or from ambient temperature change. The effect of temperature can be reduced by error avoidance or numerical compensation. The performance of a thermal error compensation system essentially depends upon the accuracy and robustness of the thermal error model and its input measurements. This paper first reviews different methods of designing thermal error models, before concentrating on employing an adaptive neuro fuzzy inference system (ANFIS) to design two thermal prediction models: ANFIS by dividing the data space into rectangular sub-spaces (ANFIS-Grid model) and ANFIS by using the fuzzy c-means clustering method (ANFIS-FCM model). Grey system theory is used to obtain the influence ranking of all possible temperature sensors on the thermal response of the machine structure. All the influence weightings of the thermal sensors are clustered into groups using the fuzzy c-means (FCM) clustering method, the groups then being further reduced by correlation analysis.
A study of a small CNC milling machine is used to provide training data for the proposed models and then to provide independent testing data sets. The results of the study show that the ANFIS-FCM model is superior in terms of the accuracy of its predictive ability with the benefit of fewer rules. The residual value of the proposed model is smaller than ±4 μm. This combined methodology can provide improved accuracy and robustness of a thermal error compensation system
Thermal error modelling of a gantry-type 5-axis machine tool using a Grey Neural Network Model
This paper presents a new modelling methodology for compensation of the thermal errors on a gantry-type 5-axis CNC machine tool. The method uses a “Grey Neural Network Model with Convolution Integral” (GNNMCI(1, N)), which makes full use of the similarities and complementarity between Grey system models and artificial neural networks (ANNs) to overcome the disadvantage of applying either model in isolation. A Particle Swarm Optimisation (PSO) algorithm is also employed to optimise the proposed Grey neural network. The size of the data pairs is crucial when the generation of data is a costly affair, since the machine downtime necessary to acquire the data is often considered prohibitive. Under such circumstances, optimisation of the number of data pairs used for training is of prime concern for calibrating a physical model or training a black-box model. A Grey Accumulated Generating Operation (AGO), which is a basis of the Grey system theory, is used to transform the original data to a monotonic series of data, which has less randomness than the original series of data. The choice of inputs to the thermal model is a non-trivial decision which is ultimately a compromise between the ability to obtain data that sufficiently correlates with the thermal distortion and the cost of implementation of the necessary feedback sensors. In this study, temperature measurement at key locations was supplemented by direct distortion measurement at accessible locations. This form of data fusion simplifies the modelling process, enhances the accuracy of the system and reduces the overall number of inputs to the model, since otherwise a much larger number of thermal sensors would be required to cover the entire structure. The Z-axis heating test, C-axis heating test, and the combined (helical) movement are considered in this work. The compensation values, calculated by the GNNMCI(1, N) model were sent to the controller for live error compensation. Test results show that a 85% reduction in thermal errors was achieved after compensation
Thermal error modelling of machine tools based on ANFIS with fuzzy c-means clustering using a thermal imaging camera
Thermal errors are often quoted as being the largest contributor to CNC machine tool errors, but they can be effectively reduced using error compensation. The performance of a thermal error compensation system depends on the accuracy and robustness of the thermal error model and the quality of the inputs to the model. The location of temperature measurement must provide a representative measurement of the change in temperature that will affect the machine structure. The number of sensors and their locations are not always intuitive and the time required to identify the optimal locations is often prohibitive, resulting in compromise and poor results.
In this paper, a new intelligent compensation system for reducing thermal errors of machine tools using data obtained from a thermal imaging camera is introduced. Different groups of key temperature points were identified from thermal images using a novel schema based on a Grey model GM (0, N) and Fuzzy c-means (FCM) clustering method. An Adaptive Neuro-Fuzzy Inference System with Fuzzy c-means clustering (FCM-ANFIS) was employed to design the thermal prediction model. In order to optimise the approach, a parametric study was carried out by changing the number of inputs and number of membership functions to the FCM-ANFIS model, and comparing the relative robustness of the designs. According to the results, the FCM-ANFIS model with four inputs and six membership functions achieves the best performance in terms of the accuracy of its predictive ability. The residual value of the model is smaller than ± 2 μm, which represents a 95% reduction in the thermally-induced error on the machine. Finally, the proposed method is shown to compare favourably against an Artificial Neural Network (ANN) model
Toward transient finite element simulation of thermal deformation of machine tools in real-time
Finite element models without simplifying assumptions can accurately describe the spatial and temporal distribution of heat in machine tools as well as the resulting deformation. In principle, this allows to correct for displacements of the Tool Centre Point and enables high precision manufacturing. However, the computational cost of FE models and restriction to generic algorithms in commercial tools like ANSYS prevents their operational use since simulations have to run faster than real-time. For the case where heat diffusion is slow compared to machine movement, we introduce a tailored implicit–explicit multi-rate time stepping method of higher order based on spectral deferred corrections. Using the open-source FEM library DUNE, we show that fully coupled simulations of the temperature field are possible in real-time for a machine consisting of a stock sliding up and down on rails attached to a stand
Optimizing Remaining Useful Life Estimation of Lithium-Ion Batteries: A Particle Swarm Optimization-Based Grey Prediction Model
Accurately estimating of the age and condition of lithium-ion batteries (LIBs) is paramount for their safe and economically viable utilization. However, assessing the degradation of these power units proves to be challenging due to their dependence on various environmental and usage factors. In this study, we propose an efficient Particle Swarm Optimization (PSO)-based Grey Theory pre-diction model to determine the Remaining Useful Life (RUL) of lit-hium-ion batteries. The proposed model utilizes PSO to optimize the coefficients of a grey prediction model, enabling accurate forecasting of the remaining useful life of LIBs. Our results demonstrate that the presented model outperforms conventional grey prediction models in terms of both accuracy and stability. Furthermore, the proposed model offers simpler predictions compared to existing models in the literature. By introducing this promising technique, our study contributes to the precise forecasting of the RUL of lithium-ion batteries and holds potential for applications in similar domains. This research serves as a significant step towards ensuring effective management and utilization of LIBs, promoting their reliability and safety
A case study of supplier selection for a steelmaking company in libya by using the combinative distance-based assessment (CODAS) model
Multi-Criteria Decision Making (MCDM) problems have received considerable attention from various researchers over the past decades. A great variety of methods and approaches has been developed in this field. The aim of this paper is to use a new COmbinative Distance-based ASsessment (CODAS) method to handle MCDM problems for a steelmaking company in Libya. So far no literature dealing with supplier selection using the (CODAS) method in the steelmaking company in Libya has been found. The concept of this method is based on computing the Euclidean distance and the Taxicab distance in order to determine the desirability of an alternative. The Euclidean distance is used as a primary measure, while the Taxicab distance as a secondary one. The developed method was applied to a real-world case study for ranking the suppliers in the Libyan Iron and Steel Company (LISCO). An attempt in this regard could enhance a decision-making technique for selecting the best suppliers for the selected case company. The results showed that the proposed method was effectively able to select the best supplier among six alternative ones