Laboratory mix design of asphalt mixture containing reclaimed material

This paper presents a study on the production of asphalt test specimens in the laboratory containing reclaimed asphalt. The mixtures considered were stone mastic asphalt concrete mixtures containing up to 30% of reclaimed asphalt. Specimens were compacted to the reference density obtained from the Marshall mix design. Gyration compaction method was used for preparing specimens for the experimental programme, while coring and cutting methods and X-ray computed tomography (CT) were used to investigate the change in properties within the specimens and to validate the selected methodology.The study concluded that gyratory compaction is suitable to produce homogeneous test specimens also for mixtures containing high amount of reclaimed asphalt. Nevertheless, preliminary trials for each material are mandatory, as well as final coring and trimming of the specimens due to side effects

Analytical Comparison of the Effectiveness of the Diabetes Prevention Program and Weight Watchers as media to prevent Type II Diabetes via Weight Loss in Different Age Categories

poster abstractType II Diabetes is a condition in which the body does not utilize insulin properly and causes detrimental symptoms such as glucose build up in the blood, overflown into the urine and passed out of the body without fulfilling the body’s main source of fuel. The Diabetes Prevention Program (DPP) is a multi-center clinical research study aimed to discover modest weight loss methods compared to oral medication (Glucophage) which prevents diabetes. Subsequently, the Health Information and Translational Sciences department at Indiana University School of Medicine uses Weight Watchers, a weight loss program, for participants at risk for Type II Diabetes (pre-diabetic) to monitor their weight and glucose levels. Both programs are investigating ways to justify the same hypothesis using different methods. Both studies aspire to determine the most affective ways for people to lose weight in order to prevent Type II Diabetes. The DPP was an efficacy trial to establish a correlation between weight loss and the risk of Type II Diabetes. Although the DPP successfully proved their hypothesis, the Weight Watchers study provides another approach in the mission of diabetes prevention. By analyzing six months of archived physical measurements data for the Diabetes Prevention Program study and the Weight Watchers study, one can determine how affective each program is in preventing weight loss depending on the age classification. The age groups are compared in fifteen-year intervals for both programs. Although both programs are successful in their mission, the conclusion of which program is more affective is still under continued study

Numerical analysis of convergent-divergent nozzle using finite element method

In this paper, Finite element method (FEM) were used to simulate the different flow configuration. Convergent divergent (CD) nozzle was considered with extended divergent duct. 1 mm of micro jets orifice diameter were arranged at ninety degrees at PCD 13 mm to control base pressure in a suddenly expanded flow. The designed Mach number of CD nozzle is 1.87 and area ratio 3.24 was considered. The different L/D of the duct was used from 2 to 10. The nozzle pressure simulated for 3, 5, 7, 9 and 11. In this case. Two-dimensional planar model was designed using ANSYS fluent analysis. The total wall pressure distribution and Mach number from inlet to the outlet was observed. From the results, it is detected that the micro jets control the loss of pressure and decreases the drag at the suddenly expanded region. The results also show, we can fix the flow parameter which will result in the maximum gain in the base pressure and velocity. In present study, the CD nozzle designed and modelled using available ANSYS fluent database: K-ε standard wall function turbulence model has been used and validated with the commercial computational fluid dynamics (CFD

FORMULATION OPTIMIZATION AND EVALUATION OF GASTRORETENTIVE TABLETS OF ONDANSETRON HCL

The aim of the work is to design Gastroretentive tablets of Ondansetron HCl for gastric retention by using 32 factorial designs. Floating tablets of Ondansetron HCl were prepared by direct compression method using polymers, sodium alginate and excipient. Gastroretentive tablets of Ondansetron HCl were successfully prepared by effervescent technique using different gel forming polymers- HPMC K200M, and sodium alginate. Formulation was optimized by design expert software. Floating tablets were evaluated for floating time, floating lag time, drug content, raft measurement and in vitro dissolution profile. The lag time is between 17-22 sec and floating time of the formulations for 12 hrs. The best fit model is Korsemeyer Peppas Model. From the study it is proof that the sustain release by floating tablets of Ondansetron HCl can be develop. Optimized batch selected was A3, The prepared gastroretentive test formulation was found to exhibit satisfactory physico-chemical characteristics at the end of 3 months, during the stability studies. The optimized formulation A3 was found to be stable at 400C/ 75% RH. Keywords: Gastric retention time, Ondansetron HCl, HPMC, sodium alginate, measurement of raft, Factorial design, stability studies.Â

Whole genome sequencing of drug resistant Mycobacterium tuberculosis isolates from a high burden tuberculosis region of North West Pakistan

Tuberculosis (TB), caused by Mycobacterium tuberculosis bacteria, is a leading infectious cause of mortality worldwide, including in Pakistan. Drug resistant M. tuberculosis is an emerging threat for TB control, making it important to detect the underlying genetic mutations, and thereby inform treatment decision making and prevent transmission. Whole genome sequencing has emerged as the new diagnostic to reliably predict drug resistance within a clinically relevant time frame, and its deployment will have the greatest impact on TB control in highly endemic regions. To evaluate the mutations leading to drug resistance and to assess for evidence of the transmission of resistant strains, 81 M. tuberculosis samples from Khyber Pakhtunkhwa province (North West Pakistan) were subjected to whole genome sequencing and standard drug susceptibility testing for eleven anti-TB drugs. We found the majority of M. tuberculosis isolates were the CAS/Delhi strain-type (lineage 3; n = 57; 70.4%) and multi-drug resistant (MDR; n = 62; 76.5%). The most frequent resistance mutations were observed in the katG and rpoB genes, conferring resistance to isoniazid and rifampicin respectively. Mutations were also observed in genes conferring resistance to other first and second-line drugs, including in pncA (pyrazinamide), embB (ethambutol), gyrA (fluoroquinolones), rrs (aminoglycosides), rpsL, rrs and giB (streptomycin) loci. Whilst the majority of mutations have been reported in global datasets, we describe unreported putative resistance markers in katG, ethA (ethionamide), gyrA and gyrB (fluoroquinolones), and pncA. Analysis of the mutations revealed that acquisition of rifampicin resistance often preceded isoniazid in our isolates. We also observed a high proportion (17.6%) of pre-MDR isolates with fluoroquinolone resistance markers, potentially due to unregulated anti-TB drug use. Our isolates were compared to previously sequenced strains from Pakistan in a combined phylogenetic tree analysis. The presence of lineage 2 was only observed in our isolates. Using a cut-off of less than ten genome-wide mutation differences between isolates, a transmission analysis revealed 18 M. tuberculosis isolates clustering within eight networks, thereby providing evidence of drug-resistant TB transmission in the Khyber Pakhtunkhwa province. Overall, we have demonstrated that drug-resistant TB isolates are circulating and transmitted in North West Pakistan. Further, we have shown the usefulness of whole genome sequencing as a diagnostic tool for characterizing M. tuberculosis isolates, which will assist future epidemiological studies and disease control activities in Pakistan

Respiratory syncytial virus-associated mortality among young infants in Karachi, Pakistan: A prospective postmortem surveillance study

Background: Respiratory syncytial virus (RSV) is an important cause of infant morbidity and mortality and a potential target for maternal immunization strategies. However, data on the role of RSV in young infant deaths in developing countries are limited.Methods: We conducted a community-based mortality surveillance from August 2018-March 2020 for infants ≤6 months in Karachi, Pakistan. We tested (reverse transcription-polymerase chain reaction) nasopharyngeal swabs from deceased infants for presence of RSV. We performed verbal autopsies and calculated odds of RSV-associated mortality with 95% CIs and used multivariable logistic regression to evaluate associations.Results: We collected 490 nasopharyngeal specimens from 1280 eligible infant deaths. There were 377/490 (76.9%) live births and 14/377 (3.7%; 95% CI: 1.8-5.6) were RSV positive. Most deaths occurred in neonates (254/377; 67.4%), males (226/377; 59.9%), and respiratory illnesses (206/377; 54.6%). Postneonatal age (10/14, 71.4%; OR: 5.5; 95% CI: 1.7-18.0), respiratory symptoms (12/14, 85.7%; OR: 5.2; 1.2-23.7), and high RSV season (9/14, 64.3%; OR: 4.4; 1.4-13.3) were associated with RSV mortality. In multivariable logistic regression analysis, respiratory symptoms (OR: 6.6; 95% CI: 1.3-32.5), RSV seasonality (6.1; 1.8-20.4), and age (9.2; 2.6-33.1) were significant predictors of RSV-associated mortality.Conclusions: RSV has a significant mortality burden in early infancy in Karachi, Pakistan. Age, RSV seasonality, and respiratory symptoms were significant predictors of RSV-associated mortality. Our findings have implications for clinical management of young infants with cold-like symptoms, policy development, and research regarding maternal immunization against RSV during pregnancy, in resource-constrained, low-income, and vaccine-hesitant populations

High-pressure processing of fish and shellfish products: Safety, quality, and research prospects

Seafood products have been one of the main drivers behind the popularity of high-pressure processing (HPP) in the food industry owing to a high demand for fresh ready-to-eat seafood products and food safety. This review provides an overview of the advanced knowledge available on the use of HPP for production of wholesome and highly nutritive clean label fish and shellfish products. Out of 653 explored items, 65 articles published during 2016-2021 were used. Analysis of the literature showed that most of the earlier work evaluated the HPP effect on physicochemical and sensorial properties, and limited information is available on nutritional aspects. HPP has several applications in the seafood industry. Application of HPP (400-600 MPa) eliminates common seafood pathogens, such as Vibrio and Listeria spp., and slows the growth of spoilage microorganisms. Use of cold water as a pressure medium induces minimal changes in sensory and nutritional properties and helps in the development of clean label seafood products. This technology (200-350 MPa) is also useful to shuck oysters, lobsters, crabs, mussels, clams, and scallops to increase recovery of the edible meat. High-pressure helps to preserve organoleptic and functional properties for an extended time during refrigerated storage. Overall, HPP helps seafood manufacturers to maintain a balance between safety, quality, processing efficiency, and regulatory compliance. Further research is required to understand the mechanisms of pressure-induced modifications and clean label strategies to minimize these modifications