Identification and interpretation of tectonic features from Skylab imagery

The author has identified the following significant results. S190-B imagery confirmed previous conclusions from S190-A that the Garlock fault does not extend eastward beyond its known termination near the southern end of Death Valley. In the Avawatz Mountains, California, two faults related to the Garlock fault zone (Mule Spring fault and Leach Spring fault) show evidence of recent activity. There is evidence that faulting related to Death Valley fault zone extends southeastward across the Old Dad Mountains. There, the Old Dad fault shows evidence of recent activity. A significant fault lineament has been identified from McCullough Range, California southeastward to Eagle Tail Mountains in southwestern Arizona. The lineament appears to control tertiary and possible cretaceous intrusives. Considerable right lateral shear is suspected to have taken place along parts of this lineament

Identification and interpretation of tectonic features from Skylab imagery

The author has identified the following significant results. The fault pattern in the southern Nevada tectonic intersection and adjacent Mojave block was found to be consistent with a model partly suggested by Hamilton and Myers (1966). The model has the following basic elements: (1) a major Laramide left-lateral shear on the Texas Zone, (2) counterclockwise rotation of the Sierra Nevada-Klamath Mountain block, (3) clockwise rotation of the Colorado Plateau, and (4) crustal extension and intrusion of volcanics in Nevada

Identification and interpretation of tectonic features from ERTS-1 imagery

The author has identified the following significant results. The transverse faults observed in the central Coast Ranges of California are believed to represent the remnants of a major system of shear faults older than the San Andreas system. The transverse shear system is believed to have developed in the Mesozoic when the Pacific Plate was advancing under the North American Plate. Shear faults thus developed due to unequal rates of underthrusting. This tectonic model indicates that the intrusive belt of the proto-Sierra Nevada and the belt of eugeosynclinal sedimentary belt (Franciscan group) which lay to the west were both subjected to regional left-handed shear. Later development of the San Andreas system as transform faults of the East Pacific Rise changes the tectonic style to right-lateral tangential. The model explains the peculiar distribution of the Franciscan rocks in the Diablo Range east of the San Andreas fault and in Santa Lucia Range west of Nacimiento fault and the presence of Sierra Nevada type granitic blocks in between the two faults in the Salinia block. This model is also consistent with an analysis of the Texas and Parras shears which indicates that the southwestern part of North America has been subjected to a major left-lateral regional shear before the development of the San Andreas fault system

Identification and interpretation of tectonic features from ERTS-1 imagery

The author has identified the following significant results. ERTS-1 imagery shows that the southern segment of the San Gabriel fault which controls the west fork of the San Gabriel River is strikingly similar to the Mill Creek Fault in the San Bernardino Mountains. It has also been noted that there is a similarity between the Sierra Madre thrust zone of the San Gabriel Mountains to the Banning thrust of the San Bernardino Mountains. This suggests that the southern San Gabriel fault was once continuous with the Mill Creek fault. When the San Bernardino Mountain block is theoretically moved to the northwest along the San Jacinto fault so that the Mill Creek fault is aligned with the southern part of the San Gabriel fault, it was found that the four transverse fault segments become aligned with the Pinto Fault on the east and with the Raymond-Santa Monica Malibu Fault zone on the west. The reconstruction identifies a continuous zone of transverse faulting extending from the Colorado River Desert to the Pacific. It seems likely that the entire fault zone was once a continuous left-lateral shear. This Anacapa Shear has probably been subjected to a 50 km left lateral movement. This analysis strongly indicates that the tectonic history of the Transverse Range has been characterized by left lateral shear on transverse faults and right lateral shear on the San Andreas fault system

Analysis of tectonic features in US southwest from Skylab photographs

The author has identified the following significant results. Skylab photographs were utilized to study faults and tectonic lines in selected areas of the U.S. Southwest. Emphasis was on elements of the Texas Zone in the Mojave Desert and the tectonic intersection in southern Nevada. Transverse faults believed to represent the continuation of the Texas Zone were found to be anomalous in strike. This suggests that the Mojave Desert block was rotated counterclockwise as a unit with the Sierra Nevada. Left-lateral strike-slip faults in Lake Mead area are interpreted as elements of the Wasatch tectonic zone; their anomalous trend indicates that the Lake Mead area has rotated clockwise with the Colorado Plateau. A tectonic model relating major fault zones to fragmentation and rotation of crustal blocks was developed. Detailed correlation of the high resolution S190B metric camera photographs with U-2 photographs and geologic maps demonstrates the feasibility of utilizing S190B photographs for the identification of geomorphic features associated with recent and active faults and for the assessment of seismic hazards

ERTS Applications in earthquake research and mineral exploration in California

Examples that ERTS imagery can be effectively utilized to identify, locate, and map faults which show geomorphic evidence of geologically recent breakage are presented. Several important faults not previously known have been identified. By plotting epicenters of historic earthquakes in parts of California, Sonora, Mexico, Arizona, and Nevada, we found that areas known for historic seismicity are often characterized by abundant evidence of recent fault and crustal movements. There are many examples of seismically quiet areas where outstanding evidence of recent fault movements is observed. One application is clear: ERTS-1 imagery could be effectively utilized to delineate areas susceptible to earthquake recurrence which, on the basis of seismic data alone, may be misleadingly considered safe. ERTS data can also be utilized in planning new sites in the geophysical network of fault movement monitoring and strain and tilt measurements

Tectonic analysis of Baja California and Parras shear belt in Mexico

The author has identified the following significant results. Geological correlation of terrain across the Gulf of California using ERTS-1 imagery revealed significant similarities between Isla Tiburon, Isla Angel de la Guarda, and the San Carlos Range in mainland Mexico. ERTS-1 imagery was used to check the validity of the existence of major trans-Baja fault zones. ERTS-1 imagery also shows that high albedo sediments similar to known late Tertiary marine sediments are widespread in southern and middle Baja and extend in places to the eastern side of the Peninsula. Major faults in northern Mexico and across the border in the United States were mapped, and ample evidence was found that the Parras and parts of the Texas lineament are belts of major transverse shear faults in areas outside the supposed limit of the Texas and Parras lineaments. A fundamental concept which may help explain many complexities in the tectonic development is beginning to emerge: The southwestern part of North America was torn by massive left-lateral shear of transverse trend (east-west) during the compressive stage of the late Mesozoic and early Cenozoic. This tectonic style has changed into tensional rifting (Basin and Range) and right-lateral shear later in the Cenozoic and Quaternary

Identification and interpretation of tectonic features from ERTS-1 imagery: Southwestern North America and the Red Sea area

The author has identified the following significant results. The ERTS-1 imagery was utilized to study major fault and tectonic lines and their intersections in southwestern North America. A system of transverse shear faults was recognized in the California Coast Ranges, the Sierra Nevada, the Great Basin, and Mexico. They are interpreted as expressions of a major left-lateral shear which predated the San Andreas system, the opening of the Gulf of California and Basin and Range rift development. Tectonic models for Basin and Range, Coast Ranges, and Texas-Parras shears were developed. Geological structures and Precambrian metamorphic trend lines of schistosity were studied across the Red Sea rift

Identification and interpretation of tectonic features from ERTS-A imagery

The author has identified the following significant results. A set of criteria characterizing known mineralized areas are: (1) occurrence at structural bends, discontinuities, complex deformations along fault zones and intersections; (2) complex terrain textures produced by fracture intersections; (3) color and tone anomalies produced by igneous intrusives, alteration effects, and oxidation. Significant fracture systems which appear to be most commonly related to mineralization in central and northeastern Nevada trend northeast-southwest, north-south, and north-northwest. In the area from Goldfield and Beatty, Nevada, to south of Las Vegas, ERTS-1 and Skylab imagery have been examined together to study an apparent correlation of mineralized areas with suspected hydrothermal alteration effects. It was observed that areas of mineralization are of complex structure, usually cut by many fractures, and sometimes have a similar mottled or variegated appearance. Although the Beatty-Rhyolite mining district is now largely inactive, several analogous areas not known to be mineralized have been identified. Identification of specific mineral prospects within general targets requires extensive field work and detailed geophysical exploration

Irrigation and drainage in the new millennium

Presented at the 2000 USCID international conference, Challenges facing irrigation and drainage in the new millennium on June 20-24 in Fort Collins, Colorado.Includes bibliographical references.A field study was conducted at Mashtul Pilot Area MPA (260 feddans' 1 feddan = 4200 m2) situated at north Zagazig to evaluate the performance of the long term constructed subsurface drainage system. The evaluation of grades, alignment and clogging of drain lines can give an indication of the system performance and efficiency. Three drainage units served by the same collector were selected. Four 30 m interval PVC lateral pipes were installed at different depths. The results revealed that, the collector drain slopes were either steep or flat while the overall slope of the collector drain was considered steep for about 45.50% of the sections and flat for the rest. On the other hand, some sections showed an inverse slope which can cause a decrease in the discharge rate. The regularity was classified as good for about 82% of the sections and moderate for the rest. The slope of the lateral drains was correct for 41.7% of those under study (12 lateral drains), steep for 16.60%, and flat for the rest, and the regularity was classified as poor except lateral number 71 which had moderate regularity in the first approach while, in the second approach 41.67% had moderate regularity and poor for the rest. Also the deviation of the drain pipes from the straight line was generally larger than pipe diameter. Consequently, air entrapment and sedimentation resulted. The results also indicated that, the average height of sedimentation inside lateral drains was 12.70 mm (618.30 gm/m drain length) while for collector drains, sediment was in 22.88% of pipe diameter. The average reduction in discharge capacity due to sedimentation for laterals and collectors upstream and downstream parts were 17.17%, 32.80% and 17.60% respectively. Also using Manning, Visser and Wesseling equations leads to different safety factors