EXPERIMENTAL EVALUATION OF A CONICAL-SCREW BRIQUETTING MACHINE FOR THE BRIQUETTING OF CARBONIZED COTTON STALKS IN SUDAN

Briquetting of the carbonized agricultural residues represents one of the possible solutions to the local energy shortages in many developing countries. It constitutes a positive solution to the problem of increasing rates of desertification in many areas worldwide. Agricultural residues are not attractive as a household fuel source for urban areas because they are very bulky and have low energy intensity. Also, to eliminate the smoke generation when burning agricultural residues requires processing it by carbonization before being used as a house-hold indoor fuel. Previously investigated, briquetting machines lacked high productivity and were of complicated designs. The present study puts forward a machine of simple design which could be manufactured locally in Sudan and of much higher productivity. The local Sudanese briquetting experience was overviewed, studying all the alternative available options and the market potential. The study presents a detailed design study of the new briquetting machine. The prototype was made and tested in the field at Al-Gazeera area in Sudan. The investigation results show that the new machine has a production rate better than all the previous alternatives. This low pressure screw briquetting machine was found to have a production rate equivalent to about eight times better than the production rate of the best local competitor. The production cost was found to be lower due to the lower binder requirement for the new machine, which is lower by about 65%. The initial moisture content of the feed stock required for this machine is lower by about 30 % compared to the best alternative, which results in shorter drying time for the fuel briquettes produced. The quality of the produced briquettes was found to be better and of lower smoke generation when burned due to the lower binder content

Irrational prescribing of over-the-counter (OTC) medicines in general practice: testing the feasibility of an educational intervention among physicians in five European countries

Background: Irrational prescribing of over-the-counter (OTC) medicines in general practice is common in Southern Europe. Recent findings from a research project funded by the European Commission (FP7), the “OTC SOCIOMED”, conducted in seven European countries, indicate that physicians in countries in the Mediterranean Europe region prescribe medicines to a higher degree in comparison to physicians in other participating European countries. In light of these findings, a feasibility study has been designed to explore the acceptance of a pilot educational intervention targeting physicians in general practice in various settings in the Mediterranean Europe region. Methods: This feasibility study utilized an educational intervention was designed using the Theory of Planned Behaviour (TPB). It took place in geographically-defined primary care areas in Cyprus, France, Greece, Malta, and Turkey. General Practitioners (GPs) were recruited in each country and randomly assigned into two study groups in each of the participating countries. The intervention included a one-day intensive training programme, a poster presentation, and regular visits of trained professionals to the workplaces of participants. Reminder messages and email messages were, also, sent to participants over a 4-week period. A pre- and post-test evaluation study design with quantitative and qualitative data was employed. The primary outcome of this feasibility pilot intervention was to reduce GPs’ intention to provide medicines following the educational intervention, and its secondary outcomes included a reduction of prescribed medicines following the intervention, as well as an assessment of its practicality and acceptance by the participating GPs. Results: Median intention scores in the intervention groups were reduced, following the educational intervention, in comparison to the control group. Descriptive analysis of related questions indicated a high overall acceptance and perceived practicality of the intervention programme by GPs, with median scores above 5 on a 7-point Likert scale. Conclusions: Evidence from this intervention will estimate the parameters required to design a larger study aimed at assessing the effectiveness of such educational interventions. In addition, it could also help inform health policy makers and decision makers regarding the management of behavioural changes in the prescribing patterns of physicians in Mediterranean Europe, particularly in Southern European countries

Public knowledge and behaviours relating to antibiotic use in Gulf Cooperation Council countries: A systematic review

© 2018 The Authors The aim of this review was to assess public knowledge and behaviours in relation to antibiotic use in GCC countries. A systematic review was performed using MEDLINE, EMBASE and other relevant databases. Cross-sectional studies published from January 2000 to June 2017 relating to public knowledge and behaviours towards antibiotic use were included. Overall nine studies met the inclusion criteria for this systematic review. Nearly half of general public respondents in the GCC region reported a lack of knowledge about antibiotic use and showed negative attitudes towards antibiotic utilisation. Penicillin was the most frequently misused antibiotic, particularly for self-medication. Most respondents declared that they obtained information on antibiotics from pharmacists. Pharmacies were the major source of antibiotics used for self-medication. A multi-disciplinary approach must be put in place to educate the public on appropriate antibiotic use, to improve policies regarding the rational prescription of antimicrobials and to increase regulation enforcement

How chip size impacts steam pretreatment effectiveness for biological conversion of poplar wood into fermentable sugars

BACKGROUND: Woody biomass is highly recalcitrant to enzymatic sugar release and often requires significant size reduction and severe pretreatments to achieve economically viable sugar yields in biological production of sustainable fuels and chemicals. However, because mechanical size reduction of woody biomass can consume significant amounts of energy, it is desirable to minimize size reduction and instead pretreat larger wood chips prior to biological conversion. To date, however, most laboratory research has been performed on materials that are significantly smaller than applicable in a commercial setting. As a result, there is a limited understanding of the effects that larger biomass particle size has on the effectiveness of steam explosion pretreatment and subsequent enzymatic hydrolysis of wood chips. RESULTS: To address these concerns, novel downscaled analysis and high throughput pretreatment and hydrolysis (HTPH) were applied to examine whether differences exist in the composition and digestibility within a single pretreated wood chip due to heterogeneous pretreatment across its thickness. Heat transfer modeling, Simons’ stain testing, magnetic resonance imaging (MRI), and scanning electron microscopy (SEM) were applied to probe the effects of pretreatment within and between pretreated wood samples to shed light on potential causes of variation, pointing to enzyme accessibility (i.e., pore size) distribution being a key factor dictating enzyme digestibility in these samples. Application of these techniques demonstrated that the effectiveness of pretreatment of Populus tremuloides can vary substantially over the chip thickness at short pretreatment times, resulting in spatial digestibility effects and overall lower sugar yields in subsequent enzymatic hydrolysis. CONCLUSIONS: These results indicate that rapid decompression pretreatments (e.g., steam explosion) that specifically alter accessibility at lower temperature conditions are well suited for larger wood chips due to the non-uniformity in temperature and digestibility profiles that can result from high temperature and short pretreatment times. Furthermore, this study also demonstrated that wood chips were hydrated primarily through the natural pore structure during pretreatment, suggesting that preserving the natural grain and transport systems in wood during storage and chipping processes could likely promote pretreatment efficacy and uniformity

Performance Study of Methane Dry Reforming on Ni/ZrO₂ Catalyst

Dry reforming of methane (DRM) has important and positive environmental and industrial impacts, as it consumes two of the top greenhouse gases in order to produce syngas (H2 and CO) and thus hydrogen (H2). The performance of DRM of conversions of CH4 and CO2 was investigated over Ni/ZrO2 catalysts. The catalytic performance of all prepared catalysts for DRM was assessed in a micro-tubular fixed bed reactor under similar reaction conditions (i.e., activation and reaction temperatures at 700 °C, a feed flow rate of 70 mL/min, reaction temperature, and a 440 min reaction time). Various characterization techniques, such as BET, CO2-TPD, TGA, XRD, EDX, and TEM, were employed. The zirconia support was modified with MgO or Y2O3. The yttria-stabilized zirconia catalyst (5Ni15YZr) provided the optimum activity performance of CH4 and CO2 conversions of 56.1 and 64.3%, respectively, at 700 °C and a 70 mL/min flow rate; this catalyst also had the highest basicity. The Ni-based catalyst was promoted with Cs, Ga, and Sr. The Sr-promoted catalyst produced the highest enhancement of activity. The influence of the reaction temperature and the feed flow rate on 5Ni15YZr and 5NiSr15YZr indicated that the activity increased with the increase in the reaction temperature and lower feed flow rate. For 5Ni3Sr15YZr, at a reaction temperature of 800 °C, the CH4 and CO2 conversions were 76.3 and 79.9%, respectively, whereas at 700 °C, the conversions of CH4 and CO2 were 66.6 and 79.6% respectively