7 research outputs found

    COMPARISON ON THE EFFECTS OF DIFFERENT FIBERS ON SELF-COMPACTING CONCRETE

    Get PDF
    The project is intended to develop cost effective of Self- compacting Concrete (SCC) .Nowadays, the construction industry in Malaysia as well as in all over the world is looking for more economical construction materials. In addition, the existing of self-compacting concrete is facing brittleness problem due to their high binder (powder) content and low aggregate amount. Hence, the aim objective of this research is to investigate the effect of different fibers on properties of self-compacting concrete. The aim is supported by two sub-objectives which are to compose the effect of Copped Basalt Fiber (CBF) and Polyvinyl Alcohol Fiber (PVA) with addition of Fly ash (FA) as the filler material on compressive and tensile strength, and to investigate and compare the effect of PVA, CBF on the workability characteristic of SCC. This study can satisfy the requirements of construction standards of self-compacting concrete found in both European Federation of National Associations Representing for Concrete (EFNARC) and Japan Society of Civil Engineers (JSCE). To achieve the research objectives there are different concrete mix has been prepared in UTP concrete laboratory. Experimental work consists of 90 cubes of size 100mm3, 10 cylinders of size 100 x 200 mm2, and 10 beams of 100 x 100 x 500 mm3. The compressive strength was tested for 7days, 28days, and 56days while the splitting tensile and flexural strengths were cast only for 28-days. The concrete mix used in this experimental study formed into two groups of concrete mix. The firs group consists of 100% OPC, while the second group consists of 70% OPC and 30% Fly ash. In each of the above groups different percentage of fibers i.e. 1% and 2% was added and the characteristics of fresh and hardened concrete were investigated. The research project showed that the fibers have slight effect of the fresh properties as well as hardened properties of self-compacting concrete mix (SCC)

    Lightweight TDMA Protocol for wireless vehicular communications

    Get PDF
    Wireless vehicular communications (WVC) has been identified as a key technology for intelligent transportation systems (ITS) for a few years ago. IEEE 802.11p (WAVE: wireless access in vehicular environments) is the proposed standard for physical and MAC layer of WVC devices. The standard is extended from 802.11 protocols. The main objectives of the standard are to change the frame format and increase delay spread tolerance introduced by vehicle mobility, in which the channel bandwidth is scaled from 20 MHz in 802.11a to 10 MHz in 802.11p. However, to ensure interoperability between vehicles communicate in rapidly changing environment where a packet transmission should be completed in short time-frame is a problematic issue. This poster proposes WiFi-based TDMA technique with flexible time slots and guard bands to tackle this problem. The new TDMA sublayer is compatible with the 802.11p standard to ensure the feasibility of adoption by any vendor. The simulation results present the performance analysis and validate the efficiency of the proposed method

    Study and implementation of architecture for the authentification and the management of certified digital documents : application in the context of the on-line services for the general public

    No full text
    Dans un environnement ouvert tel que l'Internet, les interlocuteurs sont parfois inconnus et toujours dématérialisés. Les concepts et les technologies de la confiance numérique et de la sécurité informatique doivent se combiner pour permettre un contrôle d'accès en environnement ouvert. Dans nos travaux, nous nous proposons d'étudier les concepts majeurs de cette problématique, puis de concevoir, et enfin de développer un système fonctionnel, basé sur des standards du contrôle d'accès, pour un environnement ouvert et appliqué à l'Internet. Plus précisément, notre étude consiste à mettre en œuvre une architecture de contrôle d'accès basée sur la confiance numérique. L'élément central de cette architecture est l'environnement utilisateur très riche et déployé en ligne. Cet environnement est doté de trois modules principaux qui permettent à l'utilisateur de mener à bien ses transactions. Ces modules sont le module d'analyse de règlements, le module de récupération de données et le module de validation de règlements. Nous avons élaborés des algorithmes utilisés dans ces modules. L'usage est le suivant. L'utilisateur demande un service à un fournisseur de services, celui-ci analyse la requête de l'utilisateur et extrait le règlement à partir de la base des règles de contrôle d'accès. Cette architecture est conçue à l'aide de modèles de contrôle d'accès basé sur les attributs et le langage XACML. Ce règlement contient des conditions à satisfaire par l'utilisateur pour obtenir le droit d'accès à la ressource demandée. Le module d'analyse de règlement permet à l'utilisateur d'analyser le règlement reçu du fournisseur de service. Cette analyse consiste à vérifier à l'aide d'un algorithme la disponibilité de ses informations auprès de ses sources d'information d'identité de confiance pour le fournisseur de services. Le module de récupération de données permet ensuite à l'utilisateur de récupérer ses certificats. Le module de validation lui permet de tester qu'il satisfait le règlement grâce aux certificats. Si le règlement est satisfait l'utilisateur diffuse ses certificats au fournisseur de service. La conception de ce système repose sur un ensemble de brique technologiques étudiées et décrites dans ces travaux. Ce document débute par une étude des différents cas d'usage dans le domaine des transactions en ligne. Cette étude permet de mettre en évidence la problématique de la gestion des identités numériques en environnement ouvert. Les organisations virtuelles, la notion de partenariat et la confiance sont des éléments clés qui entrent dans la conception des systèmes de contrôle d'accès basé sur la confiance. Une première étude d'un ensemble de modèles de contrôle d'accès nous permet de dégager le modèle ABAC et le langage XACML pour la conception de notre système. Dans un second temps, nous concevons le modèle de données de notre système de contrôle d'accès distribué et nous présentons et évaluons les algorithmes clés. Ensuite, nous concevons une architecture protocolaire satisfaisant les besoins d'interopérabilité entre les différentes entités impliquées. Il s'agit de protocoles permettant d'établir une session auprès d'un système, permettant de véhiculer un règlement de contrôle d'accès et permettant d'obtenir et de diffuser des informations entre tiers de confiance. La dernière partie est consacrée à l'implémentation réalisée en langage python et en utilisant le « framework » de développement Web DjangoIn an open environment such as the Internet, the interlocutors are sometimes unknown and always dematerialized. The concepts and the technologies of the digital confidence and the IT security have to harmonize to allow an access control in open environment. In our works, we suggest studying the major concepts of this problem, then designing, and finally developing a functional system, based on standards of the access control, for an environment open and applied to the Internet. More exactly, our study consists in implementing architecture of access control based on the digital confidence. The central element of this architecture is the on-line very rich and spread user environment. This environment is endowed with three main modules which allow the user to bring to a successful conclusion his transactions. These modules are the module of analysis of regulations, the module of data recovery and the module of validation of regulations. We developed algorithms used in these modules. The use is the following one. The user asks for a service in a service provider, this one analyzes the request of the user and extracts the regulation from the basis of the rules of access control. This architecture is designed by means of models of access control based on the attributes and the language XACML. This payment contains conditions to be satisfied by the user to obtain the access right in the wanted resource. The module of analysis of payment allows the user to analyze the regulation received from the supplier of service. This analysis consists in verifying by means of an algorithm the availability of its information with its information sources of reliable identity for the service provider. The module of data recovery allows then the user to get back its certificates. The module of validation allows him to test that it satisfies the payment thanks to certificates. If the payment is satisfied the user spreads his certificates to the supplier of service. The design of this system rests on a set of brick technological studied and described in these works. This document begins with a study of the various cases of use in the field of the on-line transactions. This study allows to highlight the problem of the management of the digital identities in open environment. The virtual organizations, the notion of partnership and the confidence are key elements which enter the conception of the systems of access control based on the confidence. A first study of a set of models of access control allows us to clear the model ABAC and the language XACML for the design of our system. Secondly, we conceive the model of data of our system of distributed access control and we present and estimate the key algorithms. Then, we conceive formal architecture satisfying the needs for interoperability between the various implied entities. It is about protocols allowing to establish a session with a system, allowing to convey a payment of access control and allowing to obtain and to spread information between trusted third party. The last part is dedicated to the implementation realized in language Python and by using the "framework" of Web development Djang

    Etude et mise en oeuvre d'une architecture pour l'authentification et la gestion de documents numériques certifiés : application dans le contexte des services en ligne pour le grand public

    No full text
    In an open environment such as the Internet, the interlocutors are sometimes unknown and always dematerialized. The concepts and the technologies of the digital confidence and the IT security have to harmonize to allow an access control in open environment. In our works, we suggest studying the major concepts of this problem, then designing, and finally developing a functional system, based on standards of the access control, for an environment open and applied to the Internet. More exactly, our study consists in implementing architecture of access control based on the digital confidence. The central element of this architecture is the on-line very rich and spread user environment. This environment is endowed with three main modules which allow the user to bring to a successful conclusion his transactions. These modules are the module of analysis of regulations, the module of data recovery and the module of validation of regulations. We developed algorithms used in these modules. The use is the following one. The user asks for a service in a service provider, this one analyzes the request of the user and extracts the regulation from the basis of the rules of access control. This architecture is designed by means of models of access control based on the attributes and the language XACML. This payment contains conditions to be satisfied by the user to obtain the access right in the wanted resource. The module of analysis of payment allows the user to analyze the regulation received from the supplier of service. This analysis consists in verifying by means of an algorithm the availability of its information with its information sources of reliable identity for the service provider. The module of data recovery allows then the user to get back its certificates. The module of validation allows him to test that it satisfies the payment thanks to certificates. If the payment is satisfied the user spreads his certificates to the supplier of service. The design of this system rests on a set of brick technological studied and described in these works. This document begins with a study of the various cases of use in the field of the on-line transactions. This study allows to highlight the problem of the management of the digital identities in open environment. The virtual organizations, the notion of partnership and the confidence are key elements which enter the conception of the systems of access control based on the confidence. A first study of a set of models of access control allows us to clear the model ABAC and the language XACML for the design of our system. Secondly, we conceive the model of data of our system of distributed access control and we present and estimate the key algorithms. Then, we conceive formal architecture satisfying the needs for interoperability between the various implied entities. It is about protocols allowing to establish a session with a system, allowing to convey a payment of access control and allowing to obtain and to spread information between trusted third party. The last part is dedicated to the implementation realized in language Python and by using the "framework" of Web development DjangoDans un environnement ouvert tel que l'Internet, les interlocuteurs sont parfois inconnus et toujours dématérialisés. Les concepts et les technologies de la confiance numérique et de la sécurité informatique doivent se combiner pour permettre un contrôle d'accès en environnement ouvert. Dans nos travaux, nous nous proposons d'étudier les concepts majeurs de cette problématique, puis de concevoir, et enfin de développer un système fonctionnel, basé sur des standards du contrôle d'accès, pour un environnement ouvert et appliqué à l'Internet. Plus précisément, notre étude consiste à mettre en œuvre une architecture de contrôle d'accès basée sur la confiance numérique. L'élément central de cette architecture est l'environnement utilisateur très riche et déployé en ligne. Cet environnement est doté de trois modules principaux qui permettent à l'utilisateur de mener à bien ses transactions. Ces modules sont le module d'analyse de règlements, le module de récupération de données et le module de validation de règlements. Nous avons élaborés des algorithmes utilisés dans ces modules. L'usage est le suivant. L'utilisateur demande un service à un fournisseur de services, celui-ci analyse la requête de l'utilisateur et extrait le règlement à partir de la base des règles de contrôle d'accès. Cette architecture est conçue à l'aide de modèles de contrôle d'accès basé sur les attributs et le langage XACML. Ce règlement contient des conditions à satisfaire par l'utilisateur pour obtenir le droit d'accès à la ressource demandée. Le module d'analyse de règlement permet à l'utilisateur d'analyser le règlement reçu du fournisseur de service. Cette analyse consiste à vérifier à l'aide d'un algorithme la disponibilité de ses informations auprès de ses sources d'information d'identité de confiance pour le fournisseur de services. Le module de récupération de données permet ensuite à l'utilisateur de récupérer ses certificats. Le module de validation lui permet de tester qu'il satisfait le règlement grâce aux certificats. Si le règlement est satisfait l'utilisateur diffuse ses certificats au fournisseur de service. La conception de ce système repose sur un ensemble de brique technologiques étudiées et décrites dans ces travaux. Ce document débute par une étude des différents cas d'usage dans le domaine des transactions en ligne. Cette étude permet de mettre en évidence la problématique de la gestion des identités numériques en environnement ouvert. Les organisations virtuelles, la notion de partenariat et la confiance sont des éléments clés qui entrent dans la conception des systèmes de contrôle d'accès basé sur la confiance. Une première étude d'un ensemble de modèles de contrôle d'accès nous permet de dégager le modèle ABAC et le langage XACML pour la conception de notre système. Dans un second temps, nous concevons le modèle de données de notre système de contrôle d'accès distribué et nous présentons et évaluons les algorithmes clés. Ensuite, nous concevons une architecture protocolaire satisfaisant les besoins d'interopérabilité entre les différentes entités impliquées. Il s'agit de protocoles permettant d'établir une session auprès d'un système, permettant de véhiculer un règlement de contrôle d'accès et permettant d'obtenir et de diffuser des informations entre tiers de confiance. La dernière partie est consacrée à l'implémentation réalisée en langage python et en utilisant le « framework » de développement Web Djang

    Etude et mise en oeuvre d'une architecture pour l'authentification et la gestion de documents numériques certifiés (application dans le contexte des services en ligne pour le grand public)

    No full text
    Dans un environnement ouvert tel que l'Internet, les interlocuteurs sont parfois inconnus et toujours dématérialisés. Les concepts et les technologies de la confiance numérique et de la sécurité informatique doivent se combiner pour permettre un contrôle d'accès en environnement ouvert. Dans nos travaux, nous nous proposons d'étudier les concepts majeurs de cette problématique, puis de concevoir, et enfin de développer un système fonctionnel, basé sur des standards du contrôle d'accès, pour un environnement ouvert et appliqué à l'Internet. Plus précisément, notre étude consiste à mettre en œuvre une architecture de contrôle d'accès basée sur la confiance numérique. L'élément central de cette architecture est l'environnement utilisateur très riche et déployé en ligne. Cet environnement est doté de trois modules principaux qui permettent à l'utilisateur de mener à bien ses transactions. Ces modules sont le module d'analyse de règlements, le module de récupération de données et le module de validation de règlements. Nous avons élaborés des algorithmes utilisés dans ces modules. L'usage est le suivant. L'utilisateur demande un service à un fournisseur de services, celui-ci analyse la requête de l'utilisateur et extrait le règlement à partir de la base des règles de contrôle d'accès. Cette architecture est conçue à l'aide de modèles de contrôle d'accès basé sur les attributs et le langage XACML. Ce règlement contient des conditions à satisfaire par l'utilisateur pour obtenir le droit d'accès à la ressource demandée. Le module d'analyse de règlement permet à l'utilisateur d'analyser le règlement reçu du fournisseur de service. Cette analyse consiste à vérifier à l'aide d'un algorithme la disponibilité de ses informations auprès de ses sources d'information d'identité de confiance pour le fournisseur de services. Le module de récupération de données permet ensuite à l'utilisateur de récupérer ses certificats. Le module de validation lui permet de tester qu'il satisfait le règlement grâce aux certificats. Si le règlement est satisfait l'utilisateur diffuse ses certificats au fournisseur de service. La conception de ce système repose sur un ensemble de brique technologiques étudiées et décrites dans ces travaux. Ce document débute par une étude des différents cas d'usage dans le domaine des transactions en ligne. Cette étude permet de mettre en évidence la problématique de la gestion des identités numériques en environnement ouvert. Les organisations virtuelles, la notion de partenariat et la confiance sont des éléments clés qui entrent dans la conception des systèmes de contrôle d'accès basé sur la confiance. Une première étude d'un ensemble de modèles de contrôle d'accès nous permet de dégager le modèle ABAC et le langage XACML pour la conception de notre système. Dans un second temps, nous concevons le modèle de données de notre système de contrôle d'accès distribué et nous présentons et évaluons les algorithmes clés. Ensuite, nous concevons une architecture protocolaire satisfaisant les besoins d'interopérabilité entre les différentes entités impliquées. Il s'agit de protocoles permettant d'établir une session auprès d'un système, permettant de véhiculer un règlement de contrôle d'accès et permettant d'obtenir et de diffuser des informations entre tiers de confiance. La dernière partie est consacrée à l'implémentation réalisée en langage python et en utilisant le framework de développement Web DjangoIn an open environment such as the Internet, the interlocutors are sometimes unknown and always dematerialized. The concepts and the technologies of the digital confidence and the IT security have to harmonize to allow an access control in open environment. In our works, we suggest studying the major concepts of this problem, then designing, and finally developing a functional system, based on standards of the access control, for an environment open and applied to the Internet. More exactly, our study consists in implementing architecture of access control based on the digital confidence. The central element of this architecture is the on-line very rich and spread user environment. This environment is endowed with three main modules which allow the user to bring to a successful conclusion his transactions. These modules are the module of analysis of regulations, the module of data recovery and the module of validation of regulations. We developed algorithms used in these modules. The use is the following one. The user asks for a service in a service provider, this one analyzes the request of the user and extracts the regulation from the basis of the rules of access control. This architecture is designed by means of models of access control based on the attributes and the language XACML. This payment contains conditions to be satisfied by the user to obtain the access right in the wanted resource. The module of analysis of payment allows the user to analyze the regulation received from the supplier of service. This analysis consists in verifying by means of an algorithm the availability of its information with its information sources of reliable identity for the service provider. The module of data recovery allows then the user to get back its certificates. The module of validation allows him to test that it satisfies the payment thanks to certificates. If the payment is satisfied the user spreads his certificates to the supplier of service. The design of this system rests on a set of brick technological studied and described in these works. This document begins with a study of the various cases of use in the field of the on-line transactions. This study allows to highlight the problem of the management of the digital identities in open environment. The virtual organizations, the notion of partnership and the confidence are key elements which enter the conception of the systems of access control based on the confidence. A first study of a set of models of access control allows us to clear the model ABAC and the language XACML for the design of our system. Secondly, we conceive the model of data of our system of distributed access control and we present and estimate the key algorithms. Then, we conceive formal architecture satisfying the needs for interoperability between the various implied entities. It is about protocols allowing to establish a session with a system, allowing to convey a payment of access control and allowing to obtain and to spread information between trusted third party. The last part is dedicated to the implementation realized in language Python and by using the "framework" of Web development DjangoST ETIENNE-Bib. électronique (422189901) / SudocSudocFranceF

    The challenges of wireless internet access in vehicular environments

    No full text
    The economics of currently available broadband access technologies motivate for innovate and deploy new system designs and applications in vehicular communication. The widely available and flexible Wi-Fi technique meets the cost and suitability targets for vehicular applications. To cope with the special requirements of vehicular, amendments of 802.11 standards at the MAC and PHY protocol level has been introduced in IEEE802.11p. IEEE 802.11p is the proposed standard for physical and MAC layer of wireless access in vehicular environment (WAVE) devices. The main objective of the new standard is to amend 802.to support vehicle mobility up to 150km/hr and distance 1000km by changing the frame format and increase delay spread tolerance introduced, in which the channel bandwidth is scaled from 20 MHz in 802.11a to 10 MHz in 802.11p. This paper reviews the challenges of wireless internet connectivity in vehicular communication. Transmission range, data handover and security are also covered in the paper. Other related works is reviewed and analyzed as well
    corecore