The impact of new signals on precise marine navigation - initial results from an experiment in Harwich Harbour

The General Lighthouse Authorities of the United Kingdom and Ireland (GLAs) are supporting a project at University College London (UCL) to study whether it is possible to meet the International Maritime Organisation’s (IMO) future requirements for port and harbour approach using future GNSS constellations, as detailed in IMO resolution A.915. This paper presents the results of a trial focusing on the accuracy, integrity, availability and continuity of port navigation, port approach, and docking. Abstract The required accuracy for docking is 0.1 m (95\%), which currently necessitates the use of Real Time Kinematic (RTK) processing. We consider the single-epoch geometry-based approach, which is robust against loss of lock and will fully benefit from the additional satellites. The trial was held at the beginning of May 2008 and saw THV Alert navigate into Harwich Harbour while satellite observation data were recorded from the vessel and from shore-based reference stations. Additional data were obtained from nearby Ordnance Survey reference stations, and two total stations were used to track the vessel’s passage to provide a truth model. Several modernised GPS satellites were tracked. The data were processed under different scenarios, using software developed at UCL, and the positioning performance analysed. Abstract Providing integrity for single-epoch RTK is particularly difficult. The identification of phase observation outliers is not possible before the integer ambiguities are resolved, but an undetected outlier could prevent successful ambiguity resolution. However, it will not always be necessary to fix every ambiguity to achieve the required precision, particularly with a multi-GNSS constellation. This paper introduces a new algorithm for partial ambiguity resolution in the presence of measurement bias that has been developed and tested at UCL.  This algorithm results in an improved ambiguity resolution success rate at the expense of computation time

A novel route to Pt-Bi2O3 composite thin films and their application in photo-reduction of water

A novel homoleptic bismuth(III) β-diketonate (dibenzoylmethane – dbm) complex [Bi(dbm)3]2 has been used as a precursor to thin films of crystalline β-Bi2O3, and hexachloroplatinic acid (H2PtCl6·6H2O) has been demonstrated as a suitable precursor for deposition of platinum nanoparticles, both deposited via aerosol-assisted chemical vapour deposition (AACVD). Thin films of Pt–Bi2O3 were co-deposited from a mixture of [Bi(dbm)3]2 and H2PtCl6·6H2O; the introduction of Pt particles into β-Bi2O3 causes hydrogen to be evolved during photolysis of water over the composite material, a property not found for Pt particles or β-Bi2O3 alone

Alcohol Consumption-Related Metabolites in Relation to Colorectal Cancer and Adenoma: Two Case-Control Studies Using Serum Biomarkers

Alcohol is a known carcinogen that may be associated with colorectal cancer. However, most epidemiologic studies assess alcoholic beverage consumption using self-reported data, leading to potential exposure misclassification. Biomarkers of alcohol consumption may provide an alternative, complementary approach that reduces misclassification and incorporates individual differences in alcohol metabolism. Therefore, we evaluated the relationship between previously identified alcohol consumption-related metabolites and colorectal cancer and adenoma using serum metabolomics data from two studies. Data on colorectal cancer were obtained from a nested case-control study of 502 US adults (252 cases, 250 controls) within the Prostate, Lung, Colorectal, and Ovarian Cancer Screening Trial. Data on colorectal adenoma were obtained from a case-control study of 197 US adults (120 cases, 77 controls) from the Navy Colon Adenoma Study. Unconditional multivariable logistic regression models were fit to calculate odds ratios (OR) and 95% confidence intervals (CI) for eight alcohol consumption-related metabolites identified in a previous analysis: ethyl glucuronide; 4-androstene-3beta,17beta-diol disulfate 1; 5-alpha-androstan-3beta,17beta-diol disulfate; 16-hydroxypalmitate; bilirubin (E,Z or Z,E); cyclo (-leu-pro); dihomo-linoleate (20:2n6); and palmitoleate (16:1n7). We found no clear association between these alcohol consumption-related metabolites and either endpoint. However, we did observe an inverse association between cyclo (-leu-pro) and colorectal adenoma that was only observed in the highest metabolite quantile (OR 4th vs. 1st Quantile = 0.30, 95% CI: 0.12–0.78; P-trend = 0.047), but no association for colorectal cancer. In conclusion, there were no adverse associations between alcohol consumption-related metabolites and colorectal cancer or adenoma

Levosimendan for the prevention of acute organ dysfunction in sepsis

BACKGROUND Levosimendan is a calcium-sensitizing drug with inotropic and other properties that may improve outcomes in patients with sepsis. METHODS We conducted a double-blind, randomized clinical trial to investigate whether levosimendan reduces the severity of organ dysfunction in adults with sepsis. Patients were randomly assigned to receive a blinded infusion of levosimendan (at a dose of 0.05 to 0.2 μg per kilogram of body weight per minute) for 24 hours or placebo in addition to standard care. The primary outcome was the mean daily Sequential Organ Failure Assessment (SOFA) score in the intensive care unit up to day 28 (scores for each of five systems range from 0 to 4, with higher scores indicating more severe dysfunction; maximum score, 20). Secondary outcomes included 28-day mortality, time to weaning from mechanical ventilation, and adverse events. RESULTS The trial recruited 516 patients; 259 were assigned to receive levosimendan and 257 to receive placebo. There was no significant difference in the mean (±SD) SOFA score between the levosimendan group and the placebo group (6.68±3.96 vs. 6.06±3.89; mean difference, 0.61; 95% confidence interval [CI], −0.07 to 1.29; P=0.053). Mortality at 28 days was 34.5% in the levosimendan group and 30.9% in the placebo group (absolute difference, 3.6 percentage points; 95% CI, −4.5 to 11.7; P=0.43). Among patients requiring ventilation at baseline, those in the levosimendan group were less likely than those in the placebo group to be successfully weaned from mechanical ventilation over the period of 28 days (hazard ratio, 0.77; 95% CI, 0.60 to 0.97; P=0.03). More patients in the levosimendan group than in the placebo group had supraventricular tachyarrhythmia (3.1% vs. 0.4%; absolute difference, 2.7 percentage points; 95% CI, 0.1 to 5.3; P=0.04). CONCLUSIONS The addition of levosimendan to standard treatment in adults with sepsis was not associated with less severe organ dysfunction or lower mortality. Levosimendan was associated with a lower likelihood of successful weaning from mechanical ventilation and a higher risk of supraventricular tachyarrhythmia. (Funded by the NIHR Efficacy and Mechanism Evaluation Programme and others; LeoPARDS Current Controlled Trials number, ISRCTN12776039.

Augmenting the 6-3-5 method with design information

This paper describes a comparative study between the 6-3-5 Method and the ICR Grid. The ICR Grid is an evolved variant of 6-3-5 intended to better integrate information into the concept generation process. Unlike a conventional 6-3-5 process where participants continually sketch concepts, using the ICR Grid (the name derived from its Inform, Create, Reflect activities and structured, grid-like output) participants are additionally required to undertake information search tasks, use specific information items for concept development, and reflect on the merit of concepts as the session progresses. The results indicate that although the quantity of concepts was lower, the use of information had a positive effect in a number of areas, principally the quality and variety of output. Although grounded in the area of product development, this research is applicable to any organisation undertaking idea generation and problem solving. As well as providing insights on the transference of information to concepts, it holds additional interest for studies on the composition and use of digital libraries

Intake of heterocyclic aromatic amines and the risk of prostate cancer in the EPIC-Heidelberg cohort

BACKGROUND: Heterocyclic amines (HCA) are positively associated with prostate cancer risk in animal models. Because of mostly inconsistent results of epidemiological studies, we examined the association between intake of HCA and prostate cancer risk. METHODS: In the EPIC-Heidelberg cohort, detailed information on diet, anthropometry, and lifestyle was assessed between 1994 and 1998. Dietary HCA intake was estimated using information on meat consumption, cooking methods, and preferred degree of browning. During 104,195 person-years of follow-up, 337 incident cases of prostate cancer (123 advanced cases) were identified among 9,578 men with valid dietary information. Multivariate Cox proportional hazards regression was used to examine the association between intake of 2-amino-1-methyl-6-phenylimidazo[4,5-b]pyridine (PhIP), 2-amino-3,8-dimethylimidazo[4,5-f]quinoxaline (MeIQx), and 2-amino-3,4,8-dimethylimidazo[4,5-f]quinoxaline (DiMeIQx) and prostate cancer. RESULTS: Men in the highest quartiles of PhIP, MeIQx, and DiMeIQx intake, respectively, had no increased risk of prostate cancer compared with men in the lowest quartiles (HR = 0.89, 95% CI 0.66-1.22 [PhIP]; 1.06, 0.77-1.45 [MeIQx]; 0.98, 0.72-1.34 [DiMeIQx]). There were no associations between HCA intake and advanced prostate cancer or between high consumption of strongly browned meat and prostate cancer. DISCUSSION: Our data do not support the hypothesis that HCA intake as consumed in a regular diet is a risk factor for prostate cancer

Support and Assessment for Fall Emergency Referrals (SAFER 1) trial protocol. Computerised on-scene decision support for emergency ambulance staff to assess and plan care for older people who have fallen: evaluation of costs and benefits using a pragmatic cluster randomised trial

Background: Many emergency ambulance calls are for older people who have fallen. As half of them are left at home, a community-based response may often be more appropriate than hospital attendance. The SAFER 1 trial will assess the costs and benefits of a new healthcare technology - hand-held computers with computerised clinical decision support (CCDS) software - to help paramedics decide who needs hospital attendance, and who can be safely left at home with referral to community falls services. Methods/Design: Pragmatic cluster randomised trial with a qualitative component. We shall allocate 72 paramedics ('clusters') at random between receiving the intervention and a control group delivering care as usual, of whom we expect 60 to complete the trial. Patients are eligible if they are aged 65 or older, live in the study area but not in residential care, and are attended by a study paramedic following an emergency call for a fall. Seven to 10 days after the index fall we shall offer patients the opportunity to opt out of further follow up. Continuing participants will receive questionnaires after one and 6 months, and we shall monitor their routine clinical data for 6 months. We shall interview 20 of these patients in depth. We shall conduct focus groups or semi-structured interviews with paramedics and other stakeholders. The primary outcome is the interval to the first subsequent reported fall (or death). We shall analyse this and other measures of outcome, process and cost by 'intention to treat'. We shall analyse qualitative data thematically. Discussion: Since the SAFER 1 trial received funding in August 2006, implementation has come to terms with ambulance service reorganisation and a new national electronic patient record in England. In response to these hurdles the research team has adapted the research design, including aspects of the intervention, to meet the needs of the ambulance services. In conclusion this complex emergency care trial will provide rigorous evidence on the clinical and cost effectiveness of CCDS for paramedics in the care of older people who have fallen

Процесс анализа угроз, влияющих на экономическую устойчивость предприятия

На основании проведенного исследования были выявлены факторы возникновения угроз, их группировка по степени воздействию на экономическую устойчивость предприятий и рассмотрена формализация процесса анализа угроз экономической устойчивости предприятий. В условиях рыночной экономики невозможно управлять предприятием без учета влияния угроз, а для эффективного управления важно не только знать об их присутствии, а и правильно идентифицировать конкретную угрозу.На підставі проведеного дослідження були виявлені чинники виникнення загроз, їх угруповання по степені впливу на економічну стійкість підприємств і розглянута формалізація процесу аналізу загроз економічної стійкості підприємств. В умовах ринкової економіки неможливо керувати підприємством без вивчення впливу загроз, а для ефективного керування важливо не тільки знати про їх присутність, а і правильно ідентифікувати конкретну загрозу.On the basis of the conducted research the factors of origin of threats were exposed, their gourmet on a degree to influence on economic stability of enterprises and formalization of process of analysis of threats of economic stability of enterprises is considered. In the conditions of market economy it is impossible to manage an enterprise without taking into account influencing of threats, and for the effective management it is important not only to know about their presence, and to identify the concrete threat correctly

The synthesis, characterisation and functional testing of metal oxide thin films

This thesis is concerned with the deposition of titanium dioxide thin films using chemical vapour deposition (CVD). The work emphasises the influence of deposition parameters on the properties of the resultant film. The materials have been designed with a wide range of potential applications in mind, from air and water purification to energy production and medical implant devices. Where possible, tests have been conducted to assess the efficacy of the material for these applications. The first chapter highlights a number of technologically important applications of titanium dioxide in order to demonstrate the motivation for research in this area. Some theoretical concepts are presented which are fundamental to understanding the behaviour of titanium dioxide. The principles behind chemical vapour deposition and the photocatalytic tests used in this work are discussed. The second chapter focusses on the use of three different metal substrates in TiO2 CVD. Firstly, the phase of TiO2 deposited on steel substrates was investigated. It was shown that the grade of steel had little influence with predominantly anatase films being formed in the vast majority of areas analysed. Since each grade of steel has different mechanical properties and is used in different applications, this work demonstrates that the photocatalytic properties of anatase films can be endowed to a large range of products. Secondly, TiO2 was shown to be adherent to a flexible substrate, namely aluminium foil. It was demonstrated from XPS analysis that aluminium ions did not diffuse into the TiO2, which remained photocatalytically active. A photocatalyst on a lightweight, flexible substrate offers several advantages over glass which has been the most frequently employed substrate to date. Thirdly, titanium dioxide was coated onto an alloy of cobalt, chromium and molybdenum, CoCrMo. The alloy is of interest for biomedical implants but suffers from poor biocompatability. By coating its surface with TiO2, it was shown to enhance osteogenic differentiation. Chapter three investigates nitrogen doped titanium dioxide for its potential as a visible light photocatalyst. A novel synthetic strategy was employed in which the amount of oxygen precursor was varied to determine if this would affect the position of the nitrogen in the titanium dioxide crystal structure. Differences were observed in the nitrogen XPS signal, the absorption profile, surface morphology and photocatalytic activity under both UV and visible irradiation. Visible light activity was observed for a sample made with lower amounts of oxygen precursor under UV and visible light. Finally, brookite, a rare, metastable form of titanium dioxide, was formed by atmospheric pressure chemical vapour deposition, APCVD. A brief literature review discusses the potential applications and some of the previously employed synthetic routes to brookite formation. Three sets of conditions are reported for the first known synthesis of brookite by atmospheric pressure chemical vapour deposition. A possible mechanism for brookite formation is hypothesised. This work concludes with a summary of the key findings from the experimental work and possible avenues for further research

Planetary science and exploration in the deep subsurface: results from the MINAR Program, Boulby Mine, UK

The subsurface exploration of other planetary bodies can be used to unravel their geological history and assess their habitability. On Mars in particular, present-day habitable conditions may be restricted to the subsurface. Using a deep subsurface mine, we carried out a program of extraterrestrial analog research – MINe Analog Research (MINAR). MINAR aims to carry out the scientific study of the deep subsurface and test instrumentation designed for planetary surface exploration by investigating deep subsurface geology, whilst establishing the potential this technology has to be transferred into the mining industry. An integrated multi-instrument suite was used to investigate samples of representative evaporite minerals from a subsurface Permian evaporite sequence, in particular to assess mineral and elemental variations which provide small-scale regions of enhanced habitability. The instruments used were the Panoramic Camera emulator, Close-Up Imager, Raman spectrometer, Small Planetary Linear Impulse Tool, Ultrasonic drill and handheld X-ray diffraction (XRD). We present science results from the analog research and show that these instruments can be used to investigate in situ the geological context and mineralogical variations of a deep subsurface environment, and thus habitability, from millimetre to metre scales. We also show that these instruments are complementary. For example, the identification of primary evaporite minerals such as NaCl and KCl, which are difficult to detect by portable Raman spectrometers, can be accomplished with XRD. By contrast, Raman is highly effective at locating and detecting mineral inclusions in primary evaporite minerals. MINAR demonstrates the effective use of a deep subsurface environment for planetary instrument development, understanding the habitability of extreme deep subsurface environments on Earth and other planetary bodies, and advancing the use of space technology in economic mining