OneMap: software for genetic mapping in outcrossing species

OneMap is an environment for constructing linkage maps of outcrossing plant species, using full-sib families derived from two outbred parents. The analyses are performed using a novel methodology based on the maximum likelihood approach for simultaneous estimation of linkage and linkage phases (WU et al. 2002), which has been successfully applied to sugarcane (GARCIA et al. 2006). It is implemented as a set of functions for the freely distributed software R, and handles pairwise marker analysis, marker ordering and map refinement.1443787

Molecular mapping in tropical maize (Zea mays L.) using microsatellite markers. 1. Map construction and localization of loci showing distorted segregation

Microsatellites have become the most important class of markers for mapping procedures. Primarily based on restriction fragment length polymorphism (RFLP) markers, several molecular genetic maps of maize have been developed, mainly using temperate inbred maize lines. To characterize the level of polymorphism of microsatellite loci and construct a genetic map in tropical maize, two elite inbred lines, L-08-05F and L-14-4B, were crossed to produce 400 F-2 individuals that were used as a mapping population. A survey of 859 primer pair sequences of microsatellites was used. The polymorphism screens of each microsatellite and genotype assignment were performed using high-resolution agarose gels. About 54 % of the primer sets gave clearly scorable amplification products, 13 % did not amplify and 33% could not be scored on agarose gels. A total of 213 polymorphic markers were identified and used to genotype the mapping population. Among the polymorphic markers, 40 showed loci deviating from expected Mendelian ratios and clusters of deviating markers were located in three chromosome regions. Non-Mendelian scoring was present in 19 markers. The final genetic map with 117 markers spanned 1634 cM in length with an average interval of 14 cM between adjacent markers.13929610

Gamification Guidelines: Education

Ludificação consiste na utilização de características típicas dos jogos em aplicações cujo propósito não é o entretenimento, de forma a melhorar a motivação e os resultados dos seus utilizadores. A implementação deste conceito conta com vários casos de sucesso, no entanto, o contrário também é observável, com os casos de insucesso a serem muitas vezes causados pelo design pobre dos sistemas ludificados. Este trabalho tem como propósito a criação de diretrizes que ajudem a combater o problema do design pobre na ludificação. De modo a o tornar mais focado, decidiu-se analisar o mundo da educação, mais precisamente o ensino superior, para se perceber se um sistema de ensino ludificado é capaz de ajudar os alunos a terminarem os seus cursos sem contratempos. Foram estudadas algumas das mais populares frameworks de apoio à ludificação, dando origem à criação de um conjunto de cinco diretrizes que juntam os pontos fortes de cada uma delas, enquanto colmatam os seus pontos fracos. Estas diretrizes foram usadas no desenvolvimento de um plugin para o Moodle direcionado a estudantes universitários, o “Gamification Banner”. Todo um sistema ludificado foi preparado, não só o plugin do Moodle, mas também o curso onde ele se insere. Este sistema foi testado por um grupo de voluntários que o avaliou, e da avaliação resultante comprovou-se que os estudantes são a favor da ludificação, embora não tenha sido possível provar que as suas notas são influenciadas positivamente, dado o curto tempo dos testes. Conclui-se que vale a pena investir na ludificação do ensino superior, e que se deve continuar a estudar a possibilidade de as notas dos alunos serem influenciadas positivamente por sistemas ludificados. O sucesso do sistema desenvolvido espelha-se nas diretrizes que ajudaram a criá-lo. Estas demonstram potencial, mas precisam de serem testadas noutros cenários.Gamification consists in the usage of typical game elementsin non-entertainment applications in order to improve the motivation and results of their users. There are several success stories of the implementation of this concept, however, the opposite is also observed, with failed cases often being caused by a poor design of the gamified system. The purpose of this document is to create guidelines that can prevent the problem of poor gamification design. In order to make it more focused, it was decided to analyze the world of education, more precisely college education, to understand if a gamified educational system can help students finish their courses without any setbacks. Some of the most popular gamification design frameworks were studied, leading to the creation of a set of five guidelines that bring together their strengths while addressing their weaknesses. These guidelines were used for the development of a Moodle plugin aimed at college students called “Gamification Banner”. A whole gamified system was prepared, not only the Moodle plugin, but also the course in which it is inserted. This system was tested by a group of volunteers who evaluated it, and from the resulting assessment it was found that students favor gamification, although it was not possible to prove that their grades are positively influenced given the short time of the tests. It is concluded that it is worth investing in gamification in higher education, and that the possibility of grades being positively influenced by gamified systems should be further studied. The success of the developed system is reflected in the guidelines that helped to create it. These show potential but need to be tested in other scenarios

Identification of Brucella by MALDI-TOF Mass Spectrometry. Fast and Reliable Identification from Agar Plates and Blood Cultures

BACKGROUND: MALDI-TOF mass spectrometry (MS) is a reliable method for bacteria identification. Some databases used for this purpose lack reference profiles for Brucella species, which is still an important pathogen in wide areas around the world. We report the creation of profiles for MALDI-TOF Biotyper 2.0 database (Bruker Daltonics, Germany) and their usefulness for identifying brucellae from culture plates and blood cultures. METHODOLOGY/PRINCIPAL FINDINGS: We created MALDI Biotyper 2.0 profiles for type strains belonging to B. melitensis biotypes 1, 2 and 3; B. abortus biotypes 1, 2, 5 and 9; B. suis, B. canis, B ceti and B. pinnipedialis. Then, 131 clinical isolates grown on plate cultures were used in triplicate to check identification. Identification at genus level was always correct, although in most cases the three replicates reported different identification at species level. Simulated blood cultures were performed with type strains belonging to the main human pathogenic species (B. melitensis, B. abortus, B. suis and B. canis), and studied by MALDI-TOF MS in triplicate. Identification at genus level was always correct. CONCLUSIONS/SIGNIFICANCE: MALDI-TOF MS is reliable for Brucella identification to the genus level from culture plates and directly from blood culture bottles

Population structure and genetic diversity in a commercial maize breeding program assessed with SSR and SNP markers

Information about the genetic diversity and population structure in elite breeding material is of fundamental importance for the improvement of crops. The objectives of our study were to (a) examine the population structure and the genetic diversity in elite maize germplasm based on simple sequence repeat (SSR) markers, (b) compare these results with those obtained from single nucleotide polymorphism (SNP) markers, and (c) compare the coancestry coefficient calculated from pedigree records with genetic distance estimates calculated from SSR and SNP markers. Our study was based on 1,537 elite maize inbred lines genotyped with 359 SSR and 8,244 SNP markers. The average number of alleles per locus, of group specific alleles, and the gene diversity (D) were higher for SSRs than for SNPs. Modified Roger’s distance (MRD) estimates and membership probabilities of the STRUCTURE matrices were higher for SSR than for SNP markers but the germplasm organization in four heterotic pools was consistent with STRUCTURE results based on SSRs and SNPs. MRD estimates calculated for the two marker systems were highly correlated (0.87). Our results suggested that the same conclusions regarding the structure and the diversity of heterotic pools could be drawn from both markers types. Furthermore, although our results suggested that the ratio of the number of SSRs and SNPs required to obtain MRD or D estimates with similar precision is not constant across the various precision levels, we propose that between 7 and 11 times more SNPs than SSRs should be used for analyzing population structure and genetic diversity

Genetic dissection of heterosis using epistatic association mapping in a partial NCII mating design

Heterosis refers to the phenomenon in which an F1 hybrid exhibits enhanced growth or agronomic performance. However, previous theoretical studies on heterosis have been based on bi-parental segregating populations instead of F1 hybrids. To understand the genetic basis of heterosis, here we used a subset of F1 hybrids, named a partial North Carolina II design, to perform association mapping for dependent variables: original trait value, general combining ability (GCA), specific combining ability (SCA) and mid-parental heterosis (MPH). Our models jointly fitted all the additive, dominance and epistatic effects. The analyses resulted in several important findings: 1) Main components are additive and additive-by-additive effects for GCA and dominance-related effects for SCA and MPH, and additive-by-dominant effect for MPH was partly identified as additive effect; 2) the ranking of factors affecting heterosis was dominance > dominance-by-dominance > over-dominance > complete dominance; and 3) increasing the proportion of F1 hybrids in the population could significantly increase the power to detect dominance-related effects, and slightly reduce the power to detect additive and additive-by-additive effects. Analyses of cotton and rapeseed datasets showed that more additive-by-additive QTL were detected from GCA than from trait phenotype, and fewer QTL were from MPH than from other dependent variables

Functional markers for gene mapping and genetic diversity studies in sugarcane

<p>Abstract</p> <p>Background</p> <p>The database of sugarcane expressed sequence tags (EST) offers a great opportunity for developing molecular markers that are directly associated with important agronomic traits. The development of new EST-SSR markers represents an important tool for genetic analysis. In sugarcane breeding programs, functional markers can be used to accelerate the process and select important agronomic traits, especially in the mapping of quantitative traits loci (QTL) and plant resistant pathogens or qualitative resistance loci (QRL). The aim of this work was to develop new simple sequence repeat (SSR) markers in sugarcane using the sugarcane expressed sequence tag (SUCEST database).</p> <p>Findings</p> <p>A total of 365 EST-SSR molecular markers with trinucleotide motifs were developed and evaluated in a collection of 18 genotypes of sugarcane (15 varieties and 3 species). In total, 287 of the EST-SSRs markers amplified fragments of the expected size and were polymorphic in the analyzed sugarcane varieties. The number of alleles ranged from 2-18, with an average of 6 alleles per locus, while polymorphism information content values ranged from 0.21-0.92, with an average of 0.69. The discrimination power was high for the majority of the EST-SSRs, with an average value of 0.80. Among the markers characterized in this study some have particular interest, those that are related to bacterial defense responses, generation of precursor metabolites and energy and those involved in carbohydrate metabolic process.</p> <p>Conclusions</p> <p>These EST-SSR markers presented in this work can be efficiently used for genetic mapping studies of segregating sugarcane populations. The high Polymorphism Information Content (PIC) and Discriminant Power (DP) presented facilitate the QTL identification and marker-assisted selection due the association with functional regions of the genome became an important tool for the sugarcane breeding program.</p

Use of AFLP and RAPD molecular genetic markers and cytogenetic analysis to explore relationships among taxa of the Patagonian Bromus setifolius complex

Bromus setifolius var. pictus (Hook) Skottsb., B. setifolius var. setifolius Presl. and B.setifolius var. brevifolius Ness are three native Patagonian taxa in the section Pnigma Dumort of the genus Bromus L. AFLP and RAPD analysis, in conjunction with genetic distance measurements and statistical techniques, revealed variation within this group and indicated that B. setifolius var. brevifolius was closely related to B. setifolius var. pictus, with both taxa being more distantly related to B. setifolius var. setifolius. Cytogenetic analysis confirmed the chromosomal number of B. setifolius var. pictus (2n = 70) and B. setifolius var. setifolius (2n = 28) and showed for the first time that B. setifolius var. brevifolius had 2n = 70. The combination of molecular genetic and cytogenetic evidence supported a species status for two of the three taxa and suggested hypotheses for the evolutionary origin of these complex taxa. Species status was also indicated for B. setifolius var. setifolius. Based on these findings, we suggest that B. setifolius var. pictus be referred to as B. pictus Hook var. pictus, and B. setifolius var brevifolius as B. pictus Hook var brevifolius. The correlation between AFLP diversity and variation in ecological parameters suggested that this marker system could be used to assess breeding progress and to monitor the domestication of Patagonian Bromus species for agronomic use