Effect of connecting shunt capacitor on nonlinear load terminals

This material is posted here with permission of the IEEE. Such permission of the IEEE does not in any way imply IEEE endorsement of any of Brunel University's products or services. Internal or personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution must be obtained from the IEEE by writing to [email protected]. Copyright @ 2003 IEEEThe use of terminal shunt capacitance has different effects on the displacement factor and distortion factor components of the power factor. These effects are considered for nonlinear loads with ideal supply, and also where the supply impedance exists but is small compared with the load impedance. Optimization of the displacement factor is found to result in reduction of the distortion factor to a minimum value

Accurate determination of the chiral indices of individual carbon nanotubes by combining electron diffraction and Resonant Raman spectroscopy

The experimental approach combining high resolution transmission electron microscopy (HRTEM), electron diffraction (ED) and resonant Raman spectroscopy (RRS) on the same free-standing individual carbon nanotubes (CNT) is the most efficient method to determine unambiguously the intrinsic features of the Raman-active phonons. In this paper, we review the main results obtained by the approach regarding the intrinsic features of the phonons of single-walled (SWNT) and double-walled carbon nanotubes (DWNT). First, we detail the different methods to identify the structure of SWNTs and DWNTs from the analysis of their electron diffraction patterns (EDP). In the following, we remind the principal features of the Raman response of SWNTs, unambiguously index-identified by ED. A special attention is devoted to the effect of the inter-layer interaction on the frequencies of the Raman-active phonons in index-identified DWNTs. The information obtained on index-identified SWNT and DWNT allows us to propose Raman criteria, which help identifying CNT when the ED fails to propose a single assignment. The efficiency of the Raman criteria as the complement to the ED information for the index-assignment of a few SWNTs and DWNTs is shown. The same approach to index-assign a triple-walled carbon nanotube (TWNT), by combining ED and RRS information, is reported

A multilocus phylogeny of the world Sycoecinae fig wasps (Chalcidoidea: Pteromalidae)

The Sycoecinae is one of five chalcid subfamilies of fig wasps that are mostly dependent on Ficus inflorescences for reproduction. Here, we analysed two mitochondrial ( COI , Cyt b ) and four nuclear genes (ITS2, EF-1α, RpL27a, mago nashi ) from a worldwide sample of 56 sycoecine species. Various alignment and partitioning strategies were used to test the stability of major clades. All topologies estimated using maximum likelihood and Bayesian methods were similar and well resolved but did not support the existing classification. A high degree of morphological convergence was highlighted and several species appeared best described as species complexes. We therefore proposed a new classification for the subfamily. Our analyses revealed several cases of probable speciation on the same host trees (up to 8 closely related species on one single tree of F. sumatrana ), which raises the question of how resource partitioning occurs to avoid competitive exclusion. Comparisons of our results with fig phylogenies showed that, despite sycoecines being internally ovipositing wasps host-switches are common incidents in their evolutionary history. Finally, by studying the evolutionary properties of the markers we used and profiling their phylogenetic informativeness, we predicted their utility for resolving phylogenetic relationships of Chalcidoidea at various taxonomic levels

Excitonic optical transitions characterized by Raman excitation profiles in single-walled carbon nanotubes

We examine the excitonic nature of the E33 optical transition of the individual free-standing index-identified (23, 7) single-walled carbon nanotube by means of the measurements of its radial-breathing-mode and G-mode Raman excitation profiles. We confirm that it is impossible to determine unambiguously the nature of its E33 optical transition (excitonic vs band to band) based only on the excitation profiles. Nevertheless, by combining Raman scattering, Rayleigh scattering, and optical absorption measurements on strictly the same individual (23, 7) single-walled carbon nanotube, we show that the absorption, Rayleigh spectra, and Raman excitation profiles of the longitudinal and transverse G modes are best fitted by considering the nature of the E33 transition as excitonic. The fit of the three sets of data gives close values of the transition energy E33 and damping parameter G33. This comparison shows that the fit of the Raman excitation profiles provides with good accuracy the energy and damping parameter of the excitonic optical transitions in single-walled carbon nanotubes

Vibrational Study of 13C-enriched C60 Crystals

The infrared (IR) spectrum of solid C60 exhibits many weak vibrational modes. Symmetry breaking due to 13C isotopes provides a possible route for optically activating IR-silent vibrational modes. Experimental spectra and a semi-empirical theory on natural abundance and 13C-enriched single crystals of C60 are presented. By comparing the experimental results with the theoretical results, we exclude this isotopic activation mechanism from the explanation for weakly active fundamentals in the spectra.Comment: Accepted for Phys. Rev. B, typeset in REVTEX v3.0 in LaTeX. Postscript file including figures is available at http://insti.physics.sunysb.edu/~mmartin/papers/c13twocol2.ps File with figures will be e-mailed by reques

Photoluminescence from an individual double-walled carbon nanotube

We report direct and unambiguous evidence of the existence of inner semiconducting tube (ISCT) photoluminescence (PL) from measurements performed on four individual freestanding index-identified double-walled carbon nanotubes (DWNTs). Based on thorough Rayleigh scattering, Raman scattering, and PL experiments, we are able to demonstrate that the ISCT PL is observed with a quantum yield estimated to be a few 10-6 independent of the semiconducting or metallic nature of the outer tube. This result is mainly attributed to ultrafast exciton transfer from the inner to outer tube. Furthermore, by carrying out PL excitation experiments on the (14, 1)@(15, 12) DWNT, we show that the ISCT PL can be detected through the optical excitation of the outer tube, indicating that the exciton transfer can also occur in the opposite way

Nontemplated approach to tuning the spectral properties of cyanine-based fluorescent NanoGUMBOS

Template-free controlled aggregation and spectral properties in fluorescent organic nanoparticles (FONs) is highly desirable for various applications. Herein, we report a nontemplated method for controlling the aggregation in near-infrared (NIR) cyanine-based nanoparticles derived from a group of uniform materials based on organic salts (GUMBOS). Cationic heptamethine cyanine dye 1,1′,3,3,3′,3′-hexamethylindotricarbocyanine (HMT) was coupled with five different anions, viz., [NTf2-], [BETI -], [TFPB-], [AOT-], and [TFP4B-], by an ion-exchange method to obtain the respective GUMBOS. The nanoGUMBOS obtained via a reprecipitation method were primarily amorphous and spherical (30-100 nm) as suggested by selected area electron diffraction (SAED) and transmission electron microscopy (TEM). The formation of tunable self-assemblies within the nanoGUMBOS was characterized using absorption and fluorescence spectroscopy in conjunction with molecular dynamics simulations. Counterion-controlled spectral properties observed in the nanoGUMBOS were attributed to variations in J/H ratios with different anions. Association with the [AOT-] anion afforded predominant J aggregation enabling the highest fluorescence intensity, whereas [TFP4B-] disabled the fluorescence due to predominant H aggregation in the nanoparticles. Analyses of the stacking angle of the cations based on molecular dynamic simulation results in [HMT][NTf2], [HMT][BETI], and [HMT][AOT] dispersed in water and a visual analysis of the representative simulation snapshots also imply that the type of aggregation was controlled through the counterion associated with the dye cation. © 2010 American Chemical Society

If you build it, they still may not come: outcomes and process of implementing a community-based integrated knowledge translation mapping innovation

<p>Abstract</p> <p>Background</p> <p>Maps and mapping tools through geographic information systems (GIS) are highly valuable for turning data into useful information that can help inform decision-making and knowledge translation (KT) activities. However, there are several challenges involved in incorporating GIS applications into the decision-making process. We highlight the challenges and opportunities encountered in implementing a mapping innovation as a KT strategy within the non-profit (public) health sector, reflecting on the processes and outcomes related to our KT innovations.</p> <p>Methods</p> <p>A case study design, whereby the case is defined as the data analyst and manager dyad (a two-person team) in selected Ontario Early Year Centres (OEYCs), was used. Working with these paired individuals, we provided a series of interventions followed by one-on-one visits to ensure that our interventions were individually tailored to personal and local decision-making needs. Data analysis was conducted through a variety of qualitative assessments, including field notes, interview data, and maps created by participants. Data collection and data analysis have been guided by the Ottawa Model of Research Use (OMRU) conceptual framework.</p> <p>Results</p> <p>Despite our efforts to remove all barriers associated with our KT innovation (maps), our results demonstrate that both individual level and systemic barriers pose significant challenges for participants. While we cannot claim a causal association between our project and increased mapping by participants, participants did report a moderate increase in the use of maps in their organization. Specifically, maps were being used in decision-making forums as a way to allocate resources, confirm tacit knowledge about community needs, make financially-sensitive decisions more transparent, evaluate programs, and work with community partners.</p> <p>Conclusions</p> <p>This project highlights the role that maps can play and the importance of communicating the importance of maps as a decision support tool. Further, it represents an integrated knowledge project in the community setting, calling to question the applicability of traditional KT approaches when community values, minimal resources, and partners play a large role in decision making. The study also takes a unique perspective--where research producers and users work as dyad-pairs in the same organization--that has been under-explored to date in KT studies.</p

Solvothermal synthesis and thermoelectric properties of indium telluride nanostring-cluster hierarchical structures

A simple solvothermal approach has been developed to successfully synthesize n-type α-In2Te3 thermoelectric nanomaterials. The nanostring-cluster hierarchical structures were prepared using In(NO3)3 and Na2TeO3 as the reactants in a mixed solvent of ethylenediamine and ethylene glycol at 200°C for 24 h. A diffusion-limited reaction mechanism was proposed to explain the formation of the hierarchical structures. The Seebeck coefficient of the bulk pellet pressed by the obtained samples exhibits 43% enhancement over that of the corresponding thin film at room temperature. The electrical conductivity of the bulk pellet is one to four orders of magnitude higher than that of the corresponding thin film or p-type bulk sample. The synthetic route can be applied to obtain other low-dimensional semiconducting telluride nanostructures