Mechanical oscillations in lasing microspheres

We investigate the feasibility of activating coherent mechanical oscillations in lasing microspheres by modulating the laser emission at a mechanical eigenfrequency. To this aim, 1.5% Nd3+:Barium-Titanium-Silicate microspheres with diameters around 50 {\mu}m were used as high quality factor (Q>10^6) whispering gallery mode lasing cavities. We have implemented a pump-and-probe technique in which the pump laser used to excite the Nd3+ ions is focused on a single microsphere with a microscope objective and a probe laser excites a specific optical mode with the evanescent field of a tapered fibre. The studied microspheres show monomode and multi-mode lasing action, which can be modulated in the best case up to 10 MHz. We have optically transduced thermally-activated mechanical eigenmodes appearing in the 50-70 MHz range, the frequency of which decreases with increasing the size of the microspheres. In a pump-and-probe configuration we observed modulation of the probe signal up to the maximum pump modulation frequency of our experimental setup, i.e., 20 MHz. This modulation decreases with frequency and is unrelated to lasing emission, pump scattering or thermal effects. We associate this effect to free-carrier-dispersion induced by multiphoton pump light absorption. On the other hand, we conclude that, in our current experimental conditions, it was not possible to resonantly excite the mechanical modes. Finally, we discuss on how to overcome these limitations by increasing the modulation frequency of the lasing emission and decreasing the frequency of the mechanical eigenmodes displaying a strong degree of optomechanical coupling.Comment: 17 pages, 5 figure

Periodic Structural Defects in Graphene Sheets Engineered via Electron Irradiation

Artificially-induced defects in the lattice of graphene are a powerful tool for engineering the properties of the crystal, especially if organized in highly-ordered structures such as periodic arrays. A method to deterministically induce defects in graphene is to irradiate the crystal with low-energy (<20 keV) electrons delivered by a scanning electron microscope. However, the nanometric precision granted by the focused beam can be hindered by the pattern irradiation itself due to the small lateral separation among the elements, which can prevent the generation of sharp features. An accurate analysis of the achievable resolution is thus essential for practical applications. To this end, we investigated patterns generated by low-energy electron irradiation combining atomic force microscopy and micro-Raman spectroscopy measurements. We proved that it is possible to create well-defined periodic patterns with precision of a few tens of nanometers. We found that the defected lines are influenced by electrons back-scattered by the substrate, which limit the achievable resolution. We provided a model that takes into account such substrate effects. The findings of our study allow the design and easily accessible fabrication of graphene devices featuring complex defect engineering, with a remarkable impact on technologies exploiting the increased surface reactivity

Electrical control of polariton coupling in intersubband microcavities

We demonstrate the external control of the coupling between the intersubband transition and the photonic mode of a GaAs/AlGaAs microcavity with multiple quantum wells embedded. By electrical gating, the charge density in the wells can be lowered, thereby quenching the intersubband polaritons and reverting the system to uncoupled excitations. The angle-dependent reflectance measurements are in good agreement with theoretical calculations performed in the transfer matrix formalism. The experiment shows the prospects offered by intersubband microcavities through manipulation of the system ground state

Leaf water diffusion dynamics in vivo through a sub-terahertz portable imaging system

The development of terahertz based technology has given the opportunity for the realization of non destructive techniques capable of gaining meaningful information on delicate systems such as biological samples. Here, the health status of leaves in vivo has been monitored through a portable terahertz imaging system. The data have been extracted and analysed from the images acquired and compared with analogous results reported in the literature on similar systems. The possibilty of extracting additional information from the images regarding leaf details has also been explored

Broadband Dynamic Polarization Conversion in Optomechanical Metasurfaces

Artificial photonic materials, nanofabricated through wavelength-scale engineering, have shown astounding and promising results in harnessing, tuning, and shaping photonic beams. Metamaterials have proven to be often outperforming the natural materials they take inspiration from. In particular, metallic chiral metasurfaces have demonstrated large circular and linear dichroism of light which can be used, for example, for probing different enantiomers of biological molecules. Moreover, the precise control, through designs on demand, of the output polarization state of light impinging on a metasurface, makes this kind of structures particularly relevant for polarization-based telecommunication protocols. The reduced scale of the metasurfaces makes them also appealing for integration with nanomechanical elements, adding new dynamical features to their otherwise static or quasi-static polarization properties. To this end we designed, fabricated and characterized an all-dielectric metasurface on a suspended nanomembrane. Actuating the membrane mechanical motion, we show how the metasurface reflectance response can be modified, according to the spectral region of operation, with a corresponding intensity modulation or polarization conversion. The broad mechanical resonance at atmospheric pressure, centered at about 400 kHz, makes the metasurfaces structure suitable for high-frequency operation, mainly limited by the piezo-actuator controlling the mechanical displacement, which in our experiment reached modulation frequencies exceeding 1.3 MHz

Tunnel-assisted manipulation of intersubband polaritons in asymmetric coupled quantum wells

The authors report the external control of the polariton ground state by manipulating the coupling between the intersubband transition and the photonic mode of a GaAs∕AlGaAs microcavity. The vacuum-field Rabi splitting is varied by means of charge transfer between the energetically-aligned ground subbands of asymmetric tunnel-coupled quantum wells. The authors propose the use of this structure concept for implementing ultrafast modulation of intersubband polaritons

Comparative Performance Analysis of Femtosecond-Laser-Written Diode-Pumped Pr:LiLuF4 Visible Waveguide Lasers

In this work, we present the operation of a femtosecond-laser-written diode-pumped visible waveguide laser based on praseodymium-doped lithium lutetium fluoride. The refractive index modification induced by the femtosecond laser in the crystal exhibits an anisotropic behavior, thus enabling the fabrication of different types of waveguides from single-track structures to stress-induced waveguides and depressed cladding structures. All the waveguides were characterized by realizing transmission measurements and the waveguide design was optimized to obtain extremely low propagation losses, equal to 0.12 dB/cm. Lasing has been achieved at 604 nm and 721 nm from different waveguides. In addition, stable continuous-wave lasing at 698 nm has been obtained in a depressed cladding waveguide. This wavelength corresponds to the one needed for the transition of the atomic clock based on the neutral strontium atom. In the end, we report the observation of laser emission at 645 nm from a depressed cladding waveguide

Tuning a distributed feedback laser with a coupled microcavity

We show that a distributed-feedback terahertz quantum cascade laser can be tuned with a coupled microcavity by anti-crossing of the respective eigenfrequencies. In this proof-of-concept experiment, a tuning range of 20 GHz is obtained, in good agreement with a simple finite element model, which shows that the tuning is determined by the coupling strength between the resonators. The concept could be applied to any laser cavity, but becomes progressively more attractive the lower the emission frequency. (c) 2010 Optical Society of Americ

Electron beam induced current in InSb-InAs nanowire type-III heterostructures

InSb-InAs nanowire heterostructure diodes investigated by electron beam induced current (EBIC) demonstrate an unusual spatial profile where the sign of the EBIC signal changes in the vicinity of the heterointerface. A qualitative explanation confirmed by theoretical calculations is based on the specific band diagram of the structure representing a type-III heterojunction with an accumulation layer in InAs. The sign of the EBIC signal depends on the specific parameters of this layer. In the course of measurements, the diffusion length of holes in InAs and its temperature dependence are also determined