Alkali activation of fly ashes part II: Mechanochemical pre-processing as way to optimize the reactivity

Good quality fly ash is in demand in the cement and concrete industries due to its ability to replace clinker Portland in blended cements and Portland cements in concrete. In this paper the authors show how by mechanochemical activation of fly ashes it is possible to increase the amount of fly ashes added to cement and concrete. The objective pursued in this study was to determine the mechanical properties and mineralogical characteristics of some mortars and concretes containing a high percentage of fly ash additions (50%): A= original fly ash; B= mechanically activated fly ash, C= mechanochemically activated fly ash. The mechanical strength of mortars prisms (4x4x16cm) were determined at early and long ages (1, 2, 7, 28, 90 and 180 days) at room temperature; also some concrete cubes (15x15x15cm) were analysed. The setting time and the heat flow released in the hydration process were additionally determined

Una aproximación estadística al estudio de la carbonatación del hormigón

Carbonation is one of the factors that conditions reinforced concrete durability, while porosity is one of the parameters that determines the carbonation rate: as a rule, the greater the porosity, the higher the rate. While many papers have been published on the effect of CO2 penetration in the pore solutions of concretes prepared under different experimental conditions, the literature has yet to address the joint effect of the factors considered in concrete design, such as the water/cement (w/c) ratio, type of cement, type of aggregate and presence of admixtures. The present paper discusses the findings of a statistical study of the impact of the aforementioned factors on both system porosity and carbonation rate. The type of cement, individually and in its interaction with the rest of the factors, proved to be the major determinant in concrete carbonation.La carbonatación es uno de los factores que supedita la durabilidad del hormigón armado, siendo la porosidad uno de los parámetros que más condicionan la velocidad de carbonatación. Son muchos los trabajos que estudian el efecto de la penetración del CO2 en la solución de los poros de hormigones preparados bajo distintas condiciones experimentales, sin embargo, no se encuentran referencias que analicen de forma conjunta el efecto de ciertos factores como son la relación agua/cemento (a/c ratio), el tipo de cemento, el tipo de árido y la presencia de aditivos, normalmente consideradas a la hora de diseñar un hormigón. En este trabajo se discuten los resultados obtenidos tras realizar un estudio estadístico del efecto que tienen los factores previamente mencionados, tanto en la porosidad de estos sistemas como en su nivel de carbonatación. El cemento tanto de manera individual como en sus interacciones con el resto de los factores es el factor que mas afecta a la carbonatación del hormigón

A new self-organizing neural gas model based on Bregman divergences

In this paper, a new self-organizing neural gas model that we call Growing Hierarchical Bregman Neural Gas (GHBNG) has been proposed. Our proposal is based on the Growing Hierarchical Neural Gas (GHNG) in which Bregman divergences are incorporated in order to compute the winning neuron. This model has been applied to anomaly detection in video sequences together with a Faster R-CNN as an object detector module. Experimental results not only confirm the effectiveness of the GHBNG for the detection of anomalous object in video sequences but also its selforganization capabilities.Universidad de Málaga. Campus de Excelencia Internacional Andalucía Tec

Advances in understanding alkali-activated materials

Alkali activation is a highly active and rapidly developing field of activity in the global research and development community. Commercial-scale deployment of alkali-activated cements and concretes is now proceeding rapidly in multiple nations. This paper reviews the key developments in alkali-activated materials since 2011, with a particular focus on advances in characterisation techniques and structural understanding, binder precursors and activation approaches, durability testing and design, processing, and sustainability. The scientific and engineering developments described in this paper have underpinned the on-going scale-up activities. We also identify important needs for future research and development to support the optimal and appropriate utilisation of alkali activated materials as a component of a sustainable future construction materials industry

Two RNA-binding motifs in eIF3 direct HCV IRES-dependent translation.

The initiation of protein synthesis plays an essential regulatory role in human biology. At the center of the initiation pathway, the 13-subunit eukaryotic translation initiation factor 3 (eIF3) controls access of other initiation factors and mRNA to the ribosome by unknown mechanisms. Using electron microscopy (EM), bioinformatics and biochemical experiments, we identify two highly conserved RNA-binding motifs in eIF3 that direct translation initiation from the hepatitis C virus internal ribosome entry site (HCV IRES) RNA. Mutations in the RNA-binding motif of subunit eIF3a weaken eIF3 binding to the HCV IRES and the 40S ribosomal subunit, thereby suppressing eIF2-dependent recognition of the start codon. Mutations in the eIF3c RNA-binding motif also reduce 40S ribosomal subunit binding to eIF3, and inhibit eIF5B-dependent steps downstream of start codon recognition. These results provide the first connection between the structure of the central translation initiation factor eIF3 and recognition of the HCV genomic RNA start codon, molecular interactions that likely extend to the human transcriptome

Temporal study of natural populations of Heterorhabditid and Steinernematid nematodes in horticultural crop soils

La dynamique des populations de nématodes entomopathogènes dans des sols horticoles a été étudiée par des prélèvements mensuels en huit sites de Catalogne (nord-est de l'Espagne) pendant 14 mois. Ces nématodes entomopathogènes ont été détectés dans six des huit sites et ont continué à l'être quels qu'aient été les traitements agricoles pratiqués sur ces sites. Pendant cette étude, les sites ont été labourés, détruisant ainsi l'habitat naturel des nématodes, puis laissés en jachère pendant plusieurs mois, sans que la présence des nématodes n'en paraisse affectée. Cependant, une influence saisonnière peut être observée, la présence des nématodes étant plus faible pendant les mois d'été où la température est élevée. Cette influence saisonnière apparaît également affecter la répartition verticale des nématodes qui migrent vers les couches plus profondes du sol, vraisemblablement pour éviter les effets néfastes de la température et du manque d'humidité. Les résultats de cette étude montrent que les populations naturelles de nématodes entomopathogènes sont capables de persister et de survivre dans le sol pendant de longues périodes en s'adaptant aux conditions fluctuantes et adverses de leur habitat naturel. (Résumé d'auteur

Activación alcalina de cenizas volantes. Relación entre el desarrollo mecánico resistente y la composición química de la ceniza

Alkali-activated fly ash is the primary component of a new generation of high-strength, durable binders with excellent mechanical properties and durability (on occasion bettering traditional Portland cement performance). Moreover, development of these cements may contribute to mitigating CO2 emissions, since the base material is an industrial by-product. The present study was conducted to determine the effect of the composition of the initial materials (SiO2/Al2O3 and Na2O/Al2O3 ratios) on the mechanical properties, nature and composition of the reaction products. The results obtained indicate that there is no linear relationship between these ratios and mechanical strength, but rather a series of optimal values above and below which strength declines. In the specific case of the ratios studied in the present paper, these values were: SiO2/Al2O3= 4.0 and Na2O/Al2O3= 1.0 (molar ratios).Las cenizas volantes activadas alcalinamente constituyen la base de una nueva generación de cementos con muy interesantes propiedades mecánicas, adherentes y durables (a veces incluso mejores que las de los cementos Portland tradicionales). Adicionalmente el desarrollo de estos cementos podría contribuir a mitigar las emisiones de CO2 a la atmósfera, ya que el material base de los mismos puede estar formado por subproductos industriales. En la presente investigación se realizó un estudio para determinar la influencia de la composición de los materiales iniciales (ratios SiO2/Al2O3 y Na2O/Al2O3) en las propiedades mecánicas y en la naturaleza y composición de los productos de reacción. Los resultados obtenidos indican que no existe una relación lineal de dichas ratios con las resistencias mecánicas, sino que existen unos valores óptimos, por encima y debajo de los cuales las resistencias mecánicas disminuyen. En el caso concreto de las ratios estudiadas en el presente trabajo estos valores serian: SiO2/Al2O3= 4,0 y Na2O/Al2O3= 1,0 (relaciones molares

Alkali activation of "Pozzolan-calcium aluminate cement" mixtures

Peer ReviewedPostprint (published version

Hydration of clinker phases in alkaline conditions

This research is focused on the individual behaviour of calcium silicates (C3S and C2S) and tricalcium aluminate (C3A) when hydrated with water, but in the presence of 4 wt% Na2SO4. Two- and 28‑day mechanical strength of pastes were determined and the reaction products were identified by means of XRD, SEM/EDX and 29Si and 27 Al MAS NMR. Analysis of C3A revealed that hydration was favoured in the presence of Na2SO4. This salt governed hydration kinetics while providing the alkalinity required to induce the joint precipitation of carbonated and calcium sulfoaluminate hydrate reaction product, both observed to contribute to the mechanical strength of the resulting material. In both silicates (C3S and C2S), the findings showed that the presence of Na2SO4 stimulated mechanical strength development. The synergy among all chemical reactions taking place during the hydration of these calcium silicates favoured a substantial rise in the alkalinity of the pastes formed. In addition, the anion SO42- induced the precipitation of cementitious gels with a high percentage of Q2 units, which leads to a significant increase in the mechanical strength of the materials at 28 day