Quantification of the density of cooperative neighboring synapses required to evoke endocannabinoid signaling

The spatial pattern of synapse activation may impact on synaptic plasticity. This applies to the synaptically-evoked endocannabinoid-mediated short-term depression at the parallel fiber (PF) to Purkinje cell synapse, the occurrence of which requires close proximity between the activated synapses. Here, we determine quantitatively this required proximity, helped by the geometrical organization of the cerebellar molecular layer. Transgenic mice expressing a calcium indicator selectively in granule cells enabled the imaging of action potential-evoked presynaptic calcium rise in isolated, single PFs. This measurement was used to derive the number of PFs activated within a beam of PFs stimulated in the molecular layer, from which the density of activated PFs (input density) was calculated. This density was on average 2.8μm in sagittal slices and twice more in transverse slices. The synaptically-evoked endocannabinoid-mediated suppression of excitation (SSE) evoked by ten stimuli at 200Hz was determined from the monitoring of either postsynaptic responses or presynaptic calcium rise. The SSE was significantly larger when recorded in transverse slices, where the input density is larger. The exponential description of the SSE plotted as a function of the input density suggests that the SSE is half reduced when the input density decreases from 6 to 2μm. We conclude that, although all PFs are truncated in an acute sagittal slice, half of them remain respondent to stimulation, and activated synapses need to be closer than 1.5μm to synergize in endocannabinoid signaling. © 2013 The authors

Optical Properties of Strained Graphene

The optical conductivity of graphene strained uniaxially is studied within the Kubo-Greenwood formalism. Focusing on inter-band absorption, we analyze and quantify the breakdown of universal transparency in the visible region of the spectrum, and analytically characterize the transparency as a function of strain and polarization. Measuring transmittance as a function of incident polarization directly reflects the magnitude and direction of strain. Moreover, direction-dependent selection rules permit identification of the lattice orientation by monitoring the van-Hove transitions. These photoelastic effects in graphene can be explored towards atomically thin, broadband optical elements

Teaching & learning guide for disability and climate justice

Disability is widespread: nearly one in four Americans has a disability (Taylor, 2018) and disability cuts across demographic categories. Among individuals aged 15 and over, 12.6% had some type of mobility disability; above age 65, it is nearly 40% (Brault, 2012). Mobility disabilities heighten vulnerability to climate change and climate-related disasters (UNHCHR, 2020). Reduced information resources and mobility, increased health risks, and a lack of visibility in climate change discourse put people with disabilities in a more vulnerable position in the climate crisis. However, this vulnerability can be mitigated through relevant and sufficient access to information, risk mitigation strategies, and policy-shaping power. However, when these resilience-building resources are not accessible to disabled people, it exacerbates their vulnerability to climate change and becomes an issue of climate (in)justice. This guide and the accompanying article explore ways to teach the intersection of disability and climate justice for a better understanding of each

Scattering theory of spin-orbit active adatoms on graphene

The scattering of two-dimensional massless Dirac fermions from local spin-orbit interactions with an origin in dilute concentrations of physisorbed atomic species on graphene is theoretically investigated. The hybridization between graphene and the adatoms' orbitals lifts spin and valley degeneracies of the pristine host material, giving rise to rich spin-orbit coupling mechanisms with features determined by the exact adsorption position on the honeycomb lattice - bridge, hollow, or top position - and the adatoms' outer-shell orbital type. Effective graphene-only Hamiltonians are derived from symmetry considerations, while a microscopic tight-binding approach connects effective low-energy couplings and graphene-adatom hybridization parameters. Within the T-matrix formalism, a theory for (spin-dependent) scattering events involving graphene's charge carriers, and the spin-orbit active adatoms is developed. Spin currents associated with intravalley and intervalley scattering are found to tend to oppose each other. We establish that under certain conditions, hollow-position adatoms give rise to the spin Hall effect, through skew scattering, while top-position adatoms induce transverse charge currents via trigonal potential scattering. We also identify the critical Fermi energy range where the spin Hall effect is dramatically enhanced, and the associated transverse spin currents can be reversed

Graphene Transport at High Carrier Densities using a Polymer Electrolyte Gate

We report the study of graphene devices in Hall-bar geometry, gated with a polymer electrolyte. High densities of 6 $\times 10^{13}/cm^{2}$ are consistently reached, significantly higher than with conventional back-gating. The mobility follows an inverse dependence on density, which can be correlated to a dominant scattering from weak scatterers. Furthermore, our measurements show a Bloch-Gr\"uneisen regime until 100 K (at 6.2 $\times10^{13}/cm^{2}$), consistent with an increase of the density. Ubiquitous in our experiments is a small upturn in resistivity around 3 $\times10^{13}/cm^{2}$, whose origin is discussed. We identify two potential causes for the upturn: the renormalization of Fermi velocity and an electrochemically-enhanced scattering rate.Comment: 13 pages, 4 figures, Published Versio

Influence of detector collimation on SNR in four different MDCT scanners using a reconstructed slice thickness of 5mm

The purpose of this paper is to compare the influence of detector collimation on the signal-to-noise ratio (SNR) for a 5.0mm reconstructed slice thickness for four multi-detector row CT (MDCT) units. SNRs were measured on Catphan test phantom images from four MDCT units: a GE LightSpeed QX/I, a Marconi MX 8000, a Toshiba Aquilion and a Siemens Volume Zoom. Five-millimetre-thick reconstructed slices were obtained from acquisitions performed using detector collimations of 2.0-2.5mm and 5.0mm, 120kV, a 360° tube rotation time of 0.5s, a wide range of mA and pitch values in the range of 0.75-0.85 and 1.25-1.5. For each set of acquisition parameters, a Wiener spectrum was also calculated. Statistical differences in SNR for the different acquisition parameters were evaluated using a Student's t-test (P<0.05). The influence of detector collimation on the SNR for a 5.0-mm reconstructed slice thickness is different for different MDCT scanners. At pitch values lower than unity, the use of a small detector collimation to produce 5.0-mm thick slices is beneficial for one unit and detrimental for another. At pitch values higher than unity, using a small detector collimation is beneficial for two units. One manufacturer uses different reconstruction filters when switching from a 2.5- to a 5.0-mm detector collimation. For a comparable reconstructed slice thickness, using a smaller detector collimation does not always reduce image noise. Thus, the impact of the detector collimation on image noise should be determined by standard deviation calculations, and also by assessing the power spectra of the nois

Monte Carlo simulation of a mammographic test phantom

A test phantom, including a wide range of mammographic tissue equivalent materials and test details, was imaged on a digital mammographic system. In order to quantify the effect of scatter on the contrast obtained for the test details, calculations of the scatter-to-primary ratio (S/P) have been made using a Monte Carlo simulation of the digital mammographic imaging chain, grid and test phantom. The results show that the S/P values corresponding to the imaging conditions used were in the range 0.084-0.126. Calculated and measured pixel values in different regions of the image were compared as a validation of the model and showed excellent agreement. The results indicate the potential of Monte Carlo methods in the image quality-patient dose process optimisation, especially in the assessment of imaging conditions not available on standard mammographic unit

Two-dimensional ferromagnetic spin-orbital excitations in honeycomb VI3

VI$_{3}$ is a ferromagnet with planar honeycomb sheets of bonded V$^{3+}$ ions held together by van der Waals forces. We apply neutron spectroscopy to measure the two dimensional ($J/J_{c} \approx 17$) magnetic excitations in the ferromagnetic phase, finding two energetically gapped ($\Delta \approx k_{B} T_{c} \approx$ 55 K) and dispersive excitations. We apply a multi-level spin wave formalism to describe the spectra in terms of two coexisting domains hosting differing V$^{3+}$ orbital ground states built from contrasting distorted octahedral environments. This analysis fits a common nearest neighbor in-plane exchange coupling ($J$=-8.6 $\pm$ 0.3 meV) between V$^{3+}$ sites. The distorted local crystalline electric field combined with spin-orbit coupling provides the needed magnetic anisotropy for spatially long-ranged two-dimensional ferromagnetism in VI$_{3}$.Comment: (main text - 7 pages, 4 figures; supplementary information - 13 pages, 9 figures, to be published in Phys. Rev. B