3-D FEM analysis of the effects of SPT head dimensions on recording in discrete and continuous media

Due to the considerable increase of magnetic recording density, the deviation of the head from the centerline of the track becomes a serious problem for the cross-track interference. In this paper, a three-dimensional read/write simulation system was used to investigate the effect of the width of the write head on the behavior of the flux and magnetization for continuous track medium and discrete track medium. It is shown that the magnetization in a neighboring track of the discrete track medium is smaller than that of the continuous track medium. The output of the read head using the discrete track medium is larger than that of the continuous track medium when a suitable read head width is chosen so that the cross talk is negligible.</p

Structure analysis of the Ga-stabilized GaAs(001)-c(8x2) surface at high temperatures

Structure of the Ga-stabilized GaAs(001)-c(8x2) surface has been studied using rocking-curve analysis of reflection high-energy electron diffraction (RHEED). The c(8x2) structure emerges at temperatures higher than 600C, but is unstable with respect to the change to the (2x6)/(3x6) structure at lower temperatures. Our RHEED rocking-curve analysis at high temperatures revealed that the c(8x2) surface has the structure which is basically the same as that recently proposed by Kumpf et al. [Phys. Rev. Lett. 86, 3586 (2001)]. We found that the surface atomic configurations are locally fluctuated at high temperatures without disturbing the c(8x2) periodicity.Comment: 14 pages, 4 figures, 1 tabl

Size dependent line broadening in the emission spectra of single GaAs quantum dots: Impact of surface charges on spectral diffusion

Making use of droplet epitaxy, we systematically controlled the height of self-assembled GaAs quantum dots by more than one order of magnitude. The photoluminescence spectra of single quantum dots revealed the strong dependence of the spectral linewidth on the dot height. Tall dots with a height of ~30 nm showed broad spectral peaks with an average width as large as ~5 meV, but shallow dots with a height of ~2 nm showed resolution-limited spectral lines (<120 micro eV). The measured height dependence of the linewidths is in good agreement with Stark coefficients calculated for the experimental shape variation. We attribute the microscopic source of fluctuating electric fields to the random motion of surface charges at the vacuum-semiconductor interface. Our results offer guidelines for creating frequency-locked photon sources, which will serve as key devices for long-distance quantum key distribution.Comment: 6 pages, 6 figures; updated figs and their description

Mineral Chemistry and Reflectance Spectra for the Anorthosite Clast in Lunar Meteorite Dhofar 489 with Reference to Lunar Farside Crust.

第2回極域科学シンポジウム/第34回南極隕石シンポジウム 11月18日（金） 国立国語研究所 2階講

Mineralogy of Inverted Pigeonite and Plagioclase in Cumulate Eucrites Y-980433 and Y-980318 with Reference to Early Crust Formation of the Vesta-like Body.

第2回極域科学シンポジウム/第34回南極隕石シンポジウム 11月18日（金） 国立国語研究所 2階講

Structural and magnetic properties of Fe/ZnSe(001) interfaces

We have performed first principles electronic structure calculations to investigate the structural and magnetic properties of Fe/ZnSe(001) interfaces. Calculations involving full geometry optimizations have been carried out for a broad range of thickness of Fe layers(0.5 monolayer to 10 monolayers) on top of a ZnSe(001) substrate. Both Zn and Se terminated interfaces have been explored. Total energy calculations show that Se segregates at the surface which is in agreement with recent experiments. For both Zn and Se terminations, the interface Fe magnetic moments are higher than the bulk bcc Fe moment. We have also investigated the effect of adding Fe atoms on top of a reconstructed ZnSe surface to explore the role of reconstruction of semiconductor surfaces in determining properties of metal-semiconductor interfaces. Fe breaks the Se dimer bond formed for a Se-rich (2x1) reconstructed surface. Finally, we looked at the reverse growth i.e. growth of Zn and Se atoms on a bcc Fe(001) substrate to investigate the properties of the second interface of a magnetotunnel junction. The results are in good agreement with the theoretical and experimental results, wherever available.Comment: 7 pages, 8 figures, accepted for publication in PR

Current needs of the pharmaceutical industry: opportunities and challenges for implementing novel drying technologies

[EN] Commercial drying methods are limited either by high production costs or significant quality loss due to process-related stresses. The near-ubiquitous use of freeze-drying in the pharmaceutical industry makes it the standard to which other drying technologies are compared. However, the shortcomings of lyophilization warrant evaluation of new techniques and the benefits they offer, such as compatibility with continuous manufacturing. Novel drying technologies must also overcome barriers to commercial implementation including, but not limited to, scalability and integration into a GMP environment. There remain several opportunities for further research which direct focus and investment strategy for the next generation pharmaceutical drying technologies.Langford, A.; Luy, B.; Ohtake, S. (2018). Current needs of the pharmaceutical industry: opportunities and challenges for implementing novel drying technologies. En IDS 2018. 21st International Drying Symposium Proceedings. Editorial Universitat Politècnica de València. 1997-2002. https://doi.org/10.4995/IDS2018.2018.8354OCS1997200

Scheduling Dynamic OpenMP Applications over Multicore Architectures

International audienceApproaching the theoretical performance of hierarchical multicore machines requires a very careful distribution of threads and data among the underlying non-uniform architecture in order to minimize cache misses and NUMA penalties. While it is acknowledged that OpenMP can enhance the quality of thread scheduling on such architectures in a portable way, by transmitting precious information about the affinities between threads and data to the underlying runtime system, most OpenMP runtime systems are actually unable to efficiently support highly irregular, massively parallel applications on NUMA machines. In this paper, we present a thread scheduling policy suited to the execution of OpenMP programs featuring irregular and massive nested parallelism over hierarchical architectures. Our policy enforces a distribution of threads that maximizes the proximity of threads belonging to the same parallel section, and uses a NUMA-aware work stealing strategy when load balancing is needed. It has been developed as a plug-in to the ForestGOMP OpenMP platform. We demonstrate the efficiency of our approach with a highly irregular recursive OpenMP program resulting from the generic parallelization of a surface reconstruction application. We achieve a speedup of 14 on a 16-core machine with no application-level optimization

Comparisons of Mineralogy Between Cumulate Eucrites and Lunar Meteorites Possibly from the Farside Anorsothitic Crust

Anorthosites composed of nearly pure anorthite (PAN) at many locations in the farside highlands have been observed by the Kaguya multiband imager and spectral profiler [1]. Mineralogical studies of lunar meteorites of the Dhofar 489 group [2,3] and Yamato (Y-) 86032 [4], all possibly from the farside highlands, showed some aspects of the farside crust. Nyquist et al. [5] performed Sm-Nd and Ar-Ar studies of pristine ferroan anorthosites (FANs) of the returned Apollo samples and of Dhofar 908 and 489, and discussed implications for lunar crustal history. Nyquist et al. [6] reported initial results of a combined mineralogical/chronological study of the Yamato (Y-) 980318 cumulate eucrite with a conventional Sm-Nd age of 4567 24 Ma and suggested that all eucrites, including cumulate eucrites, crystallized from parental magmas within a short interval following differentiation of their parent body, and most eucrites participated in an event or events in the time interval ~4400- 4560 Ma in which many isotopic systems were partially reset. During the foregoing studies, we recognized that variations in mineralogy and chronology of lunar anorthosites are more complex than those of the crustal materials of the HED parent body. In this study, we compared the mineralogies and reflectance spectra of the cumulate eucrites, Y-980433 and 980318, to those of the Dhofar 307 lunar meteorite of the Dhofar 489 group [2]. Here we consider information from these samples to gain a better understanding of the feldspathic farside highlands and the Vesta-like body

Mutations of the mitochondrial ND1 gene as a cause of MELAS

Copyright © 2004 by the BMJ Publishing Group Ltd. All rights reserved. BMJ JournalsD. M. Kirby, R. McFarland, A. Ohtake, C. Dunning, M. T. Ryan, C. Wilson, D. Ketteridge, D. M. Turnbull, D. R. Thorburn, R. W. Taylo