5,480 research outputs found

    The Historical Development of the Port of Livorno (Italy) and Its New Port Plan 2010 in Advanced Stage of Elaboration

    Get PDF
    The geographical location makes the port of Livorno one of the most important in Italy. The port, in fact, benefits of an extended network of roads and rails connecting it with the rest of Italy, and central and southern Europe as well. The history of Livorno and its port is inextricably linked to that of Pisa and Florence, and to the complexity of events that determined the political set-up of the region along several centuries. Looking at the new port plan of Livorno has made it necessary an extensive overview of the history of both the port, and of its planning. This analysis has allowed: to understand the reason for the different choices made in the past for the development of the port, highlighting, when necessary, the errors made; to identify the strengths and weaknesses of the existing port infrastructure; to identify the works needed to boost the port in the European context. The purpose of this paper is to provide a summary of the analysis performed for the implementation of the new Livorno port plan 2010 and show how the port planning in Italy is often conditioned by hundreds of centuries of history

    Improvement in workability of terminals placed along the inner side of port vertical breakwaters by means of recurved parapet walls

    Get PDF
    The function of main port breakwaters is to protect harbour basins from incoming waves and currents. In the event that a maritime terminal is placed on the inner side of a main breakwater, it is extremely important to limit waves overtopping the structure, because the overtopping flows may be very dangerous for the safety of the operations taking place in the terminal. Very often during storms if the overtopping discharges are severe, the terminal is temporarily closed, reducing its average annual workability accordingly. Wave overtopping is normally limited by using high parapet walls (crownwalls) which are not well considered from an environmental point of view due to their visual impact. A good solution to reduce wave overtopping limiting the increasing of the crownwalls height, is to use recurved parapet walls. The paper presents a new formula for recurved walls which can be used to estimate the overtopping flow rates reduction compared to normal vertical parapets. The formula has been obtained for vertical breakwaters by using numerical computations. The recurved parapet has the shape of a circumference sector, characterized by a radius and an opening angle. The numerical computations were performed applying OpenFOAM® which solves the 3D RANS equations for multiphase flows (air and water). The results show the high hydraulic efficiency of recurved walls in reducing overtopping rates compared to traditional vertical parapets

    Modulation of opportunistic species Corynebacterium diphtheriae, Haemophilus parainfluenzae, Moraxella catarrhalis, Prevotella denticola, Prevotella melaninogenica, Rothia dentocariosa, Staphylococcus aureus and Streptococcus pseudopneumoniae by intranasal administration of Streptococcus salivarius 24SMBc and Streptococcus oralis 89a combination in healthy subjects

    Get PDF
    \u2013 OBJECTIVE: Probiotics S. salivarius 24SMBc and S. oralis 89a comprised in the nasal spray Rinogermina are known to exert inhibition of harmful pathogens and ameliorate the outcome of patients with chronic upper airways infections. In this study, for the first time, the effect of this formulation on the modulation of the microflora of healthy subjects was evaluated, with particular interest on pathobionts and pathogens present. PATIENTS AND METHODS: Metagenomic identification and quantification of bacterial abundances in healthy subjects were carried out by means of Ion Torrent Personal Machine. In particular, nasal swabs were sampled one, two and four weeks after seven days of treatment with Rinogermina. RESULTS: The modulation of the abundance of pathobionts and pathogenic species (i.e., Corynebacterium diphtheriae, Haemophilus parainfluenzae, Moraxella catarrhalis, Prevotella denticola, Prevotella melaninogenica, Rothia dentocariosa, Staphylococcus aureus and Streptococcus pseudopneumoniae) was characterized and a significant temporary decrease in their presence was identified. CONCLUSIONS: The beneficial effects of S. salivarius 24SMBc and S. oralis 89a nasal intake was assessed but seemed to be restricted in specific temporal windows. Thus it would be interesting to evaluate also this positive impact of longer administration of this probiotic formulation

    Chitosan-alginate microparticles of Andrographis paniculata and Annona muricata extracts for Controlled Release

    Get PDF
    This study investigates the properties of microparticles prepared from Andrographis paniculata (AP) and Annona muricata (AM) aqueous extracts for controlled release. Extracts obtained by maceration of the dried powdered plant leaves were microencapsulated by counterion coacervation method. Microcapsules were characterized using Fourier-transform infrared-spectroscopy (FTIR), x-ray difractometry (XRD) and differential scanning calorimetry (DSC).In vitro release studies were carried out at pH 1.2 for 2 h and 6.8 for a further 10 h. Release was monitored at274 and 230 nm for AM and AP, respectively. Encapsulation efficacy was less than 52% for AP and 70% for AM. In vitro drug release at pH 1.2 showed less than 40% release from the microcapsules after 2h while over 90% of extract was released after 6h at pH 6.8. Conventional capsules released the content within 1 h in simulated gastric fluid. FTIR, XRD and DSC results indicate the stable character of the extract within the microcapsules. Microencapsulation with chitosan- alginate controlled the release of Andrographis paniculata (AP) and Annona muricata (AM) aqueous extracts

    Cerebellar ataxia and exercise intolerance in Erdheim-Chester disease

    Get PDF
    Background: Erdheim-Chester disease (ECD), a rare disorder of monocyte/macrophage lineage, has been related to cerebellar dysfunction. To increase the awareness of this rare, protean disease, an unusual, myasthenia-like onset of ECD is reported. Case presentation: A 42-year-old man presented with a 6-year history of mild evening fatigability in his four limbs followed by motor and cognitive symptoms associated with cerebellar atrophy, dentate nuclei and dentato-thalamic pathway degeneration. Magnetic resonance imaging revealed hyperintense signals in T2 and fluid-attenuated inversion recovery sequences within the pons, cerebellar white matter, dentate nuclei and globi pallidi in the absence of any contrast enhancement. Whole-body bone scintigraphy with 99Technetium - methylene diphosphonate and fluorodeoxyglucose-positron emission tomography both revealed symmetric uptake in the lower extremities a finding suggestive of a diagnosis of ECD. Histological examination revealed diffuse infiltration of CD 68+ histiocytes with foamy cytoplasms in the presence of B-type of Rapidly Accelerated Fibrosarcoma protein kinase (BRAF)V600E activating mutation in tumor cells. Conclusion: In patients with myasthenia-like symptoms who test negatively for myasthenia gravis, neurodegenerative diseases, and disorders of the hypothalamus, a diagnosis of ECD should be taken into consideration

    Loading of Polydimethylsiloxane with a Human ApoB-Derived Antimicrobial Peptide to Prevent Bacterial Infections

    Get PDF
    Background: medical device-induced infections affect millions of lives worldwide and innovative preventive strategies are urgently required. Antimicrobial peptides (AMPs) appear as ideal candidates to efficiently functionalize medical devices surfaces and prevent bacterial infections. In this scenario, here, we produced antimicrobial polydimethylsiloxane (PDMS) by loading this polymer with an antimicrobial peptide identified in human apolipoprotein B, r(P)ApoBLPro. Methods: once obtained loaded PDMS, its structure, anti-infective properties, ability to release the peptide, stability, and biocompatibility were evaluated by FTIR spectroscopy, water contact angle measurements, broth microdilution method, time-killing kinetic assays, quartz crystal microbalance analyses, MTT assays, and scanning electron microscopy analyses. Results: PDMS was loaded with r(P)ApoBLPro peptide which was found to be present not only in the bulk matrix of the polymer but also on its surface. ApoB-derived peptide was found to retain its antimicrobial properties once loaded into PDMS and the antimicrobial material was found to be stable upon storage at 4â—¦ C for a prolonged time interval. A gradual and significant release (70% of the total amount) of the peptide from PDMS was also demonstrated upon 400 min incubation and the antimicrobial material was found to be endowed with anti-adhesive properties and with the ability to prevent biofilm attachment. Furthermore, PDMS loaded with r(P)ApoBLPro peptide was found not to affect the viability of eukaryotic cells. Conclusions: an easy procedure to functionalize PDMS with r(P)ApoBLPro peptide has been here developed and the obtained functionalized material has been found to be stable, antimicrobial, and biocompatible

    Evidence-based considerations exploring relations between sars-cov-2 pandemic and air pollution: Involvement of pm2.5-mediated up-regulation of the viral receptor ace-2

    Get PDF
    The COVID-19/SARS-CoV-2 pandemic struck health, social and economic systems worldwide, and represents an open challenge for scientists —coping with the high inter-individual variability of COVID-19, and for policy makers —coping with the responsibility to understand environmental factors affecting its severity across different geographical areas. Air pollution has been warned of as a modifiable factor contributing to differential SARS-CoV-2 spread but the biological mechanisms underlying the phenomenon are still unknown. Air quality and COVID-19 epidemiological data from 110 Italian provinces were studied by correlation analysis, to evaluate the association between particulate matter (PM)2.5 concentrations and incidence, mortality rate and case fatality risk of COVID-19 in the period 20 February–31 March 2020. Bioinformatic analysis of the DNA sequence encoding the SARS-CoV-2 cell receptor angiotensin-converting enzyme 2 (ACE-2) was performed to identify consensus motifs for transcription factors mediating cellular response to pollutant insult. Positive correlations between PM2.5 levels and the incidence (r = 0.67, p < 0.0001), the mortality rate (r = 0.65, p < 0.0001) and the case fatality rate (r = 0.7, p < 0.0001) of COVID-19 were found. The bioinformatic analysis of the ACE-2 gene identified nine putative consensus motifs for the aryl hydrocarbon receptor (AHR). Our results confirm the supposed link between air pollution and the rate and outcome of SARS-CoV-2 infection and support the hypothesis that pollution-induced over-expression of ACE-2 on human airways may favor SARS-CoV-2 infectivity

    Autologous Microfragmented Adipose Tissue Reduces the Catabolic and Fibrosis Response in an in Vitro Model of Tendon Cell Inflammation

    Get PDF
    Background. Mesenchymal stem cells (MSCs) emerged as a promising therapy for tendon pathologies. Microfragmented adipose tissue (\u3bcFAT) represents a convenient autologous product for the application of MSC-based therapies in the clinical setting. In the present study, the ability of \u3bcFAT to counteract inflammatory processes induced by IL-1\u3b2 on human tendon cells (TCs) was evaluated. Methods. Cell viability and proliferation were evaluated after 48 hours of transwell coculture of TCs and autologous \u3bcFAT in the presence or absence of IL-1\u3b2. Gene expression of scleraxis, collagen type I and type III, metalloproteinases-1 and -3, and cyclooxygenase-2 was evaluated by real-time RT-PCR. The content of VEGF, IL-1Ra, TNF\u3b1, and IL-6 was evaluated by ELISA. Results. IL-1\u3b2-treated TCs showed augmented collagen type III, metalloproteases, and cyclooxygenase-2 expression. \u3bcFAT was able to reduce the expression of collagen type III and metalloproteases-1 in a significant manner, and at the same time, it enhanced the production of VEGF, IL-1Ra, and IL-6. Conclusions. In this in vitro model of tendon cell inflammation, the paracrine action of \u3bcFAT, exerted by anti-inflammatory molecules and growth factors, was able to inhibit the expression of fibrosis and catabolic markers. Then, these results suggest that the application of \u3bcFAT may represent an effective conservative or adjuvant therapy for the treatment of tendon disorders

    Treatment of primary shoulder stiffness: Results of a survey on surgeon practice patterns in Italy

    Get PDF
    Objectives Shoulder stiffness is a condition of restricted glenohumeral range of motion (ROM), which can arise spontaneously or as consequence of a known cause. Several treatment options are available and currently no consensus has been obtained on which treatment algorithm represents the best choice for the patient. The aim of this study was to investigate surgeon practice patterns in Italy regarding treatment of primary shoulder stiffness. Methods A literature review was performed to identify randomized controlled trials reporting results of shoulder stiffness treatment. The following controversial or critical points in the treatment of primary shoulder stiffness were identified: modalities of physical therapy; indication for oral corticosteroid; indication and frequency for injective corticosteroid; technique and site of injection; and indication, timing, and technique for surgery. A survey composed by 14 questions was created and adminis-trated to the members of a national association specialized in orthopaedics and sports traumatology (SIGASCOT at the time of survey completion, recently renamed SIA-GASCOT after the fusion of the societies SIGASCOT and SIA). Results A total of 204 completed questionnaires were collected. Physical therapy was recommended by 98% of the interviewed. The use of oral corticosteroids was considered by 51%, and injections of corticosteroids by 72%. The posterior injection approach was the one preferred and a number of three was considered the upper limit for repeated injections. Injective therapy with local anesthetics and hyaluronic acid was considered by more than 20% of the interviewed. Thirty percent of the interviewed did not treat shoulder stiffness surgically. Conclusion Several approaches to shoulder stiffness have been proposed and high-level evidence is available to analyze and discuss their results. Several controversial points emerged both from a literature review and from this national survey. Treatment of shoulder stiffness should be tailored to the patient’s clinical situation and the stage of its pathology and should aim at pain reduction, ROM restoration, functional regain, and shortening of symptoms duration, with conservative therapy remaining the mainstay of treatment
    • …
    corecore