Comparison of CFD and DSMC Using Calibrated Transport Parameters

Hypersonic re-entry flows span a wide range of length scales where regions of both rarefied and continuum flow exist. Traditional computational fluid dynamics (CFD) techniques do not provide an accurate solution for the rarefied regions of such mixed flow fields. Although direct simulation Monte Carlo (DSMC) can be used to accurately capture both the continuum and rarefied features of mixed flow fields, they are computationally expensive when employed to simulate the low Knudsen number continuum regimes. Thus, a hybrid framework for seamlessly combining the two methodologies, CFD and DSMC, continues to be a topic of significant research effort. Ensuring consistency in the reaction kinetics and transport models employed within CFD and DSMC is a crucial requirement for obtaining a reliable solution from a hybrid framework for combined continuum/rarefied high speed flows. This paper represents one of the first studies to utilize the calibrated transport parameters developed to ensure consistency between CFD and DSMC solvers. The new variable soft sphere (VSS) parameters are compared to both previous standard variable hard sphere (VHS) parameters and also to solutions from the CFD transport properties that the new parameters were developed to reproduce

Shuttle Return To Flight Experimental Results: Protuberance Effects on Boundary Layer Transition

The effect of isolated roughness elements on the windward boundary layer of the Shuttle Orbiter has been experimentally examined in the Langley Aerothermodynamic Laboratory in support of an agency-wide effort to prepare the Shuttle Orbiter for return to flight. This experimental effort was initiated to provide a roughness effects database for developing transition criteria to support on-orbit decisions to repair damage to the thermal protection system. Boundary layer transition results were obtained using trips of varying heights and locations along the centerline and attachment lines of 0.0075-scale models. Global heat transfer images using phosphor thermography of the Orbiter windward surface and the corresponding heating distributions were used to infer the state of the boundary layer (laminar, transitional, or turbulent). The database contained within this report will be used to formulate protuberance-induced transition correlations using predicted boundary layer edge parameters

Real-Time Temperature and Heat Flux Measurements for Lyophilization Process Design and Monitoring: Part 1

Lyophilization is a common method used to preserve pharmaceutical and biological products. Accurately measuring temperature during the three stages of lyophilization: freezing, primary drying, and secondary drying, is important to ensure product consistency and to reduce operating costs. Wireless temperature sensors were evaluated to determine if temperature is monitored accurately and to determine if wireless temperature sensors offer advantages over traditional temperature measurement technologies. These sensors contain three capacitors to monitor temperature as the solvent is sublimated. A Millrock Technology REVO lyophilizer was used for testing. Water and 5% w/v sucrose solution were distributed in 3 mL fill volume increments into Wheaton 6R vials. Wireless temperature sensor measurements were compared with thermocouple measurements. Differences in temperature measurements between the top, middle, and bottom capacitors in each wireless temperature sensing unit demonstrates the sublimation pattern of the solvent in the primary drying stage. These sensors allow for heat flux through the product to be computed during the primary drying phase. Our goal is to assess the limitations and benefits of using wireless temperature sensors compared to commonly used thermocouples and other process monitoring technologies for lyophilization processes as well as to determine methods to further improve the wireless temperature sensors

Fostering reciprocity in global health partnerships through a structured, hands-on experience for visiting postgraduate medical trainees

BACKGROUND: Global health programs that allow international experiences for US learners should also enable reciprocal learning experiences for international learners, particularly if that is a need identified by the partner institution. METHODS: A partnership between Indiana University and Moi University, Kenya, has successfully hosted 41 visiting Kenyan internal medicine and pediatrics registrars at Indiana University since 2006. The program's logistics, curriculum, and evaluation are described. RESULTS: The registrars rotated through nephrology, cardiology, hematology and oncology, infectious diseases, and intensive care, as well as related ambulatory experiences, functioning on a level comparable to fourth-year medical students. They showed significant improvement in pretest and posttest scores on a standardized National Board of Medical Examiners examination (P  =  .048). International learners experienced culture shock, yet they felt the Indiana University elective was helpful and would recommend it to future participants. CONCLUSIONS: Global health programs can reciprocate the benefits derived for US students and residents by offering learning experiences to international learners if that is an expressed need from the international partner. Barriers to those experiences can be overcome, and the hands-on, elective experience has the potential to positively affect the knowledge and attitudes of participants as well as the home nation

The arctic curve of the domain-wall six-vertex model in its anti-ferroelectric regime

An explicit expression for the spatial curve separating the region of ferroelectric order (`frozen' zone) from the disordered one (`temperate' zone) in the six-vertex model with domain wall boundary conditions in its anti-ferroelectric regime is obtained.Comment: 12 pages, 1 figur

DSMC Shock Simulation of Saturn Entry Probe Conditions

This work describes the direct simulation Monte Carlo (DSMC) investigation of Saturn entry probe scenarios and the influence of non-equilibrium phenomena on Saturn entry conditions. The DSMC simulations coincide with rarefied hypersonic shock tube experiments of a hydrogen-helium mixture performed in the Electric Arc Shock Tube (EAST) at NASA Ames Research Center. To directly compare to the experimental results, the DSMC simulations are post-processed through the NEQAIR line-by-line radiation code. Improved collision cross-sections, inelastic collision parameters, and reaction rates are determined for a high temperature DSMC simulation of a 7-species H2-He mixture and an electronic excitation model is implemented in the DSMC code. Simulation results for 27.8 and 27.4 kms shock waves are obtained at 0.2 and 0.1 Torr respectively and compared to measured spectra in the VUV, UV, visible, and IR ranges. These results confirm the persistence of non-equilibrium for several centimeters behind the shock and the diffusion of atomic hydrogen upstream of the shock wave. Although the magnitude of the radiance did not match experiments and an ionization inductance period was not observed in the simulations, the discrepancies indicated where improvements are needed in the DSMC and NEQAIR models

Data quality monitoring and performance metrics of a prospective, population-based observational study of maternal and newborn health in low resource settings

BACKGROUND: To describe quantitative data quality monitoring and performance metrics adopted by the Global Network´s (GN) Maternal Newborn Health Registry (MNHR), a maternal and perinatal population-based registry (MPPBR) based in low and middle income countries (LMICs). METHODS: Ongoing prospective, population-based data on all pregnancy outcomes within defined geographical locations participating in the GN have been collected since 2008. Data quality metrics were defined and are implemented at the cluster, site and the central level to ensure data quality. Quantitative performance metrics are described for data collected between 2010 and 2013. RESULTS: Delivery outcome rates over 95% illustrate that all sites are successful in following patients from pregnancy through delivery. Examples of specific performance metric reports illustrate how both the metrics and reporting process are used to identify cluster-level and site-level quality issues and illustrate how those metrics track over time. Other summary reports (e.g. the increasing proportion of measured birth weight compared to estimated and missing birth weight) illustrate how a site has improved quality over time. CONCLUSION: High quality MPPBRs such as the MNHR provide key information on pregnancy outcomes to local and international health officials where civil registration systems are lacking. The MNHR has measures in place to monitor data collection procedures and improve the quality of data collected. Sites have increasingly achieved acceptable values of performance metrics over time, indicating improvements in data quality, but the quality control program must continue to evolve to optimize the use of the MNHR to assess the impact of community interventions in research protocols in pregnancy and perinatal health.Fil: Goudar, Shivaprasad S.. KLE University. Jawaharlal Nehru Medical College; IndiaFil: Stolka, Kristen B.. Research Triangle Institute International; Estados UnidosFil: Koso Thomas, Marion. Eunice Kennedy Shriver National Institute of Child Health and Human Development; Estados UnidosFil: Honnungar, Narayan V.. KLE University. Jawaharlal Nehru Medical College; IndiaFil: Mastiholi, Shivanand C.. KLE University. Jawaharlal Nehru Medical College; IndiaFil: Ramadurg, Umesh Y.. S. Nijalingappa Medical College; IndiaFil: Dhaded, Sangappa M.. KLE University. Jawaharlal Nehru Medical College; IndiaFil: Pasha, Omrana. Aga Khan University; PakistánFil: Patel, Archana. Indira Gandhi Government Medical College and Lata Medical Research Foundation; IndiaFil: Esamai, Fabian. University School of Medicine; KeniaFil: Chomba, Elwyn. University of Zambia; ZambiaFil: Garces, Ana. Universidad de San Carlos; GuatemalaFil: Althabe, Fernando. Consejo Nacional de Investigaciones Científicas y Técnicas; Argentina. Instituto de Efectividad Clínica y Sanitaria; ArgentinaFil: Carlo, Waldemar A.. University of Alabama at Birmingahm; Estados UnidosFil: Goldenberg, Robert L.. Columbia University; Estados UnidosFil: Hibberd, Patricia L.. Massachusetts General Hospital for Children; Estados UnidosFil: Liechty, Edward A.. Indiana University; Estados UnidosFil: Krebs, Nancy F.. University of Colorado School of Medicine; Estados UnidosFil: Hambidge, Michael K.. University of Colorado School of Medicine; Estados UnidosFil: Moore, Janet L.. Research Triangle Institute International; Estados UnidosFil: Wallace, Dennis D.. Research Triangle Institute International; Estados UnidosFil: Derman, Richard J. Christiana Care Health Services; Estados UnidosFil: Bhalachandra, Kodkany S.. KLE University. Jawaharlal Nehru Medical College; IndiaFil: Bose, Carl L.. University of North Carolina; Estados Unido

Trends and determinants of stillbirth in developing countries: results from the Global Network\u27s Population-Based Birth Registry.

BACKGROUND: Stillbirth rates remain high, especially in low and middle-income countries, where rates are 25 per 1000, ten-fold higher than in high-income countries. The United Nations\u27 Every Newborn Action Plan has set a goal of 12 stillbirths per 1000 births by 2030 for all countries. METHODS: From a population-based pregnancy outcome registry, including data from 2010 to 2016 from two sites each in Africa (Zambia and Kenya) and India (Nagpur and Belagavi), as well as sites in Pakistan and Guatemala, we evaluated the stillbirth rates and rates of annual decline as well as risk factors for 427,111 births of which 12,181 were stillbirths. RESULTS: The mean stillbirth rates for the sites were 21.3 per 1000 births for Africa, 25.3 per 1000 births for India, 56.9 per 1000 births for Pakistan and 19.9 per 1000 births for Guatemala. From 2010 to 2016, across all sites, the mean stillbirth rate declined from 31.7 per 1000 births to 26.4 per 1000 births for an average annual decline of 3.0%. Risk factors for stillbirth were similar across the sites and included maternal age \u3c 20 years and age \u3e 35 years. Compared to parity 1-2, zero parity and parity \u3e 3 were both associated with increased stillbirth risk and compared to women with any prenatal care, women with no prenatal care had significantly increased risk of stillbirth in all sites. CONCLUSIONS: At the current rates of decline, stillbirth rates in these sites will not reach the Every Newborn Action Plan goal of 12 per 1000 births by 2030. More attention to the risk factors and treating the causes of stillbirths will be required to reach the Every Newborn Action Plan goal of stillbirth reduction. TRIAL REGISTRATION: NCT01073475