329 research outputs found
Assessing the benefits and risks of application of inverter drives in industry
This paper presents the impact assessment of converters installed in an industrial plant on the power quality in internal power grid of the plant. The analysis of real measurements showed that the installation of inverter drives, despite many benefits, as energy savings, that have been reported in the paper, can also cause many problems. We observed multiple issues related to failures in the control and automation systems that could be due to the interference generated by simultaneous operation of inverter drives
Determining of Fault Locations with Hilbert – Huang Transformation on XLPE Cables between Land and Offshore Substations
Using of mathematical transformations and digital signal processing (DSP) methods of recorded voltage and currents in power systems in order to extract important informations about physical processes is already known. Higher resolution of measurements and massive introduction of PMU devices in the power systems allows appliance of DSP - based fault location methods in complex power networks. High availability of power systems is required in the modern societies. Fast fault location algorithms and consequent fast repairing of faults is necessary condition for high availability of power networks. Here is represented a numerical procedure for fault location and testing of method already introduced in scientific literature on complex configuration of power network consisting of XLPE underground submarine and land cables between land and offshore substation connecting large wind park with main power system
Application of the Prony Method for Compensation of Errors in Distance Relays
In this paper we propose an application of the Prony method as a filtering technique for distance relays. First, an overview of the Prony method is presented, then the distance relay model and the impact of non-filtered frequency components such as interharmonics and subharmonics by application of typical digital filters in the operation of the distance relay is shown. We apply a solution using Prony method as a filtering technique applied to distance relay algorithms. Finally, an analysis of the proposed algorithm using simulated signals is evaluated to validate the proposed distance relay algorithm in reach error and operation time of the relay, a distorted characteristic of the Mho distance relay is shown in the impedance plane
Terrain Sculptor: generalizing terrain models for relief shading
Shaded relief derived from high-resolution terrain models often contains distracting terrain details that need to be removed for medium- and small- scale mapping. When standard raster filter operations are applied to digital terrain data, important ridge tops and valley edges are blurred, altering the characteristic shape of these features in the resulting shaded relief. This paper introduces Terrain Sculptor, a software application that prepares generalized terrain models for relief shading. The application uses a generalization methodology based on a succession of raster operations. Curvature coefficients detect and accentuate important relief features. Terrain Sculptor offers a graphical user interface to adjust the algorithm to various scales and terrain resolutions
Measurement of IEC Groups and Subgroups Using Advanced Spectrum Estimation Methods
The International Electrotechnical Commission (IEC) standards characterize the waveform distortions in power systems with the amplitudes of harmonic and interharmonic groups and subgroups. These groups/subgroups utilize the waveform spectral components obtained from a fixed frequency resolution discrete Fourier transform (DFT). Using the IEC standards allows for a compromise among the different goals, such as the needs for accuracy, simplification, and unification. In some cases, however, the power-system waveforms are characterized by spectral components that the DFT cannot capture with enough accuracy due to the fixed frequency resolution and/or the spectral leakage phenomenon. This paper investigates the possibility of a group/subgroup evaluation using the following advanced spectrum estimation methods: adaptive Prony, estimation of signal parameters via rotational invariance techniques, and root MUltiple-SIgnal Classification (MUSIC). These adaptive methods use variable lengths of time windows of analysis to ensure the best fit of the waveforms; they are not characterized by the fixed frequency resolution and do not suffer from the spectral leakage phenomenon. This paper also presents the results of the applications of these methods to three test waveforms, to current and voltage waveforms obtained from simulations of a real dc arc-furnace plant, and to waveforms measured at the point of common coupling of the low-voltage network supplying a high-performance laser printer
Recent Developments of Photovoltaics Integrated with Battery Storage Systems and Related Feed-In Tariff Policies: A Review
The paper presents a review of the recent developments of photovoltaics integrated with battery storage systems (PV-BESs) and related to feed-in tariff policies. The integrated photovoltaic battery systems are separately discussed in the regulatory context of Germany, Italy, Spain, United Kingdom, Australia, and Greece; the attention of this paper is focused on those integrated systems subject to incentivisation policies such as feed-in tariff. Most of the contributions reported in this paper consider already existing incentive schemes; the remaining part of the contributions proposes interesting and novel feed-in tariff schemes. All the contributions provide an important resource for carrying out further research on a new era of incentive policies in order to promote storage technologies and integrated photovoltaic battery systems in smart grids and smart cities. Recent incentive policies adopted in Germany, Italy, Spain, and Australia are also discussed
Symmetry Analysis for the Ruddlesden-Popper Systems, Ca3Mn2O7 and Ca3Ti2O7
We perform a symmetry analysis of the zero-temperature instabilities of the
tetragonal phase of Ca3Mn2O7 and Ca3Ti2O7 which is stable at high temperature.
We introduce order parameters to characterize each of the possible lattice
distortions in order to construct a Landau free energy which elucidates the
proposed group-subgroup relations for structural transitions in these systems.
We include the coupling between the unstable distortion modes and the
macroscopic strain tensor. We also analyze the symmetry of the dominantly
antiferromagnetic ordering which allows weak ferromagnetism. We show that in
this phase the weak ferromagnetic moment and the spontaneous ferroelectric
polarization are coupled, so that rotating one of these ordering by applying an
external electric or magnetic field one can rotate the other ordering. We
discuss the number of different domains (including phase domains) which exist
in each of the phases and indicate how these may be observed.Comment: 21 pages, 14 figure
Microgrid working conditions identification based on cluster analysis. A case study from lambda microgrid
This article presents the application of cluster analysis (CA) to data proceeding from a testbed microgrid located at Sapienza University of Rome. The microgrid consists of photovoltaic (PV), battery storage system (BESS), emergency generator set, and different types of load with a real-time energy management system based on supervisory control and data acquisition. The investigation is based on the area-related approach - the CA algorithm considers the input database consisting of data from all measurement points simultaneously. Under the investigation, different distance measures (Euclidean, Chebyshev, or Manhattan), as well as an approach to the optimal number of cluster selections. Based on the investigation, the four different clusters that represent working conditions were obtained using methods to define an optimal number of clusters. Cluster 1 represented time with high PV production; cluster 2 represented time with relatively low PV production and when BESS was charged; cluster 3 represents time with relatively high PV production and when BESS was charged; cluster 4 represents time without PV production. Additionally, after the clustering process, a deep analysis was performed in relation to the working condition of the microgrid
EEG filtering based on blind source separation (BSS) for early detection of Alzheimer's disease
Objective: Development of an EEG preprocessing technique for improvement of detection of Alzheimer’s disease (AD). The technique is based on filtering of EEG data using blind source separation (BSS) and projection of components which are possibly sensitive to cortical neuronal impairment found in early stages of AD. Method: Artifact-free 20 s intervals of raw resting EEG recordings from 22 patients with Mild Cognitive Impairment (MCI) who later proceeded to AD and 38 age-matched normal controls were decomposed into spatio-temporally decorrelated components using BSS algorithm ‘AMUSE’. Filtered EEG was obtained by back projection of components with the highest linear predictability. Relative power of filtered data in delta, theta, alpha1, alpha2, beta1, and beta 2 bands were processed with Linear Discriminant Analysis (LDA). Results: Preprocessing improved the percentage of correctly classified patients and controls computed with jack-knifing cross-validation from 59 to 73% and from 76 to 84%, correspondingly. Conclusions: The proposed approach can significantly improve the sensitivity and specificity of EEG based diagnosis. Significance: Filtering based on BSS can improve the performance of the existing EEG approaches to early diagnosis of Alzheimer’s disease. It may also have potential for improvement of EEG classification in other clinical areas or fundamental research. The developed method is quite general and flexible, allowing for various extensions and improvements. q 2004 Published by Elsevier Ireland Ltd. on behalf of International Federation of Clinical Neurophysiology
Formation and action of lignin-modifying enzymes in cultures of Phlebia radiata supplemented with veratric acid
Transformation of veratric (3,4-dimethoxybenzoic) acid by the white rot fungus Phlebia radiata was studied to elucidate the role of ligninolytic, reductive, and demeth(ox)ylating enzymes. Under both air and a 100% O2 atmosphere, with nitrogen limitation and glucose as a carbon source, reducing activity resulted in the accumulation of veratryl alcohol in the medium. When the fungus was cultivated under air, veratric acid caused a rapid increase in laccase (benzenediol:oxygen oxidoreductase; EC 1.10.3.2) production, which indicated that veratric acid was first demethylated, thus providing phenolic compounds for laccase. After a rapid decline in laccase activity, elevated lignin peroxidase (ligninase) activity and manganese-dependent peroxidase production were detected simultaneously with extracellular release of methanol. This indicated apparent demethoxylation. When the fungus was cultivated under a continuous 100% O2 flow and in the presence of veratric acid, laccase production was markedly repressed, whereas production of lignin peroxidase and degradation of veratryl compounds were clearly enhanced. In all cultures, the increases in lignin peroxidase titers were directly related to veratryl alcohol accumulation. Evolution of 14CO2 from 3-O14CH3-and 4-O14CH3-labeled veratric acids showed that the position of the methoxyl substituent in the aromatic ring only slightly affected demeth(ox)ylation activity. In both cases, more than 60% of the total 14C was converted to 14CO2 under air in 4 weeks, and oxygen flux increased the degradation rate of the 14C-labeled veratric acids just as it did with unlabeled cultures
- …