Carlsberg Ridge and Mid-Atlantic Ridge: Comparison of slow spreading centre analogues

Eighty per cent of all mid-ocean spreading centres are slow. Using a mixture of global bathymetry data and ship-board multibeam echosounder data, we explore the morphology of global mid-ocean ridges and compare two slow spreading analogues: the Carlsberg Ridge in the north-west Indian Ocean between 57°E and 60°E, and the Kane to Atlantis super-segment of the Mid-Atlantic Ridge between 21°N and 31°N. At a global scale, mid-ocean spreading centres show an inverse correlation between segment length and spreading rate with segmentation frequency. Within this context, both the Mid-Atlantic Ridge super-segment and Carlsberg Ridge are similar: spreading at 22 and 26 mm/yr full rates respectively, being devoid of major transform faults, and being segmented by dextral, non-transform, second-order discontinuities. For these and other slow spreading ridges, we show that segmentation frequency varies inversely with flank height and ridge axis depth. Segments on both the Mid-Atlantic Ridge super-segment and Carlsberg Ridge range in aspect ratio (ridge flank height/axis width), depth and symmetry. Segments with high aspect ratios and deeper axial floors often have asymmetric rift flanks and are associated with indicators of lower degrees of melt flux. Segments with low aspect ratios have shallower axial floors, symmetric rift flanks, and evidence of robust melt supply. The relationship between segmentation, spreading rate, ridge depth and morphology, at both a global and local scale, is evidence that rates of melting of the underlying mantle and melt delivery to the crust play a significant role in determining the structure and morphology of slow spreading mid-ocean ridges

Boninite and Harzburgite from Leg 125 (Bonin-Mariana Forearc): A Case Study of Magma Genesis during the Initial Stages of Subduction

Holes drilled into the volcanic and ultrabasic basement of the Izu-Ogasawara and Mariana forearc terranes during Leg 125 provide data on some of the earliest lithosphere created after the start of Eocene subduction in the Western Pacific. The volcanic basement contains three boninite series and one tholeiite series. (1) Eocene low-Ca boninite and low-Ca bronzite andesite pillow lavas and dikes dominate the lowermost part of the deep crustal section through the outer-arc high at Site 786. (2) Eocene intermediate-Ca boninite and its fractionation products (bronzite andesite, andesite, dacite, and rhyolite) make up the main part of the boninitic edifice at Site 786. (3) Early Oligocene intermediate-Ca to high-Ca boninite sills or dikes intrude the edifice and perhaps feed an uppermost breccia unit at Site 786. (4) Eocene or Early Oligocene tholeiitic andesite, dacite, and rhyolite form the uppermost part of the outer-arc high at Site 782. All four groups can be explained by remelting above a subduction zone of oceanic mantle lithosphere that has been depleted by its previous episode of partial melting at an ocean ridge. We estimate that the average boninite source had lost 10-15 wt% of melt at the ridge before undergoing further melting (5-10%) shortly after subduction started. The composition of the harzburgite (<2% clinopyroxene, Fo content of about 92%) indicates that it underwent a total of about 25% melting with respect to a fertile MORB mantle. The low concentration of Nb in the boninite indicates that the oceanic lithosphere prior to subduction was not enriched by any asthenospheric (OIB) component. The subduction component is characterized by (1) high Zr and Hf contents relative to Sm, Ti, Y, and middle-heavy REE, (2) light REE-enrichment, (3) low contents of Nb and Ta relative to Th, Rb, or La, (4) high contents of Na and Al, and (5) Pb isotopes on the Northern Hemisphere Reference Line. This component is unlike any subduction component from active arc volcanoes in the Izu-Mariana region or elsewhere. Modeling suggests that these characteristics fit a trondhjemitic melt from slab fusion in amphibolite facies. The resulting metasomatized mantle may have contained about 0.15 wt% water. The overall melting regime is constrained by experimental data to shallow depths and high temperatures (1250°C and 1.5 kb for an average boninite) of boninite segregation. We thus envisage that boninites were generated by decompression melting of a diapir of metasomatized residual MORB mantle leaving the harzburgites as the uppermost, most depleted residue from this second stage of melting. Thermal constraints require that both subducted lithosphere and overlying oceanic lithosphere of the mantle wedge be very young at the time of boninite genesis. This conclusion is consistent with models in which an active transform fault offsetting two ridge axes is placed under compression or transpression following the Eocene plate reorganization in the Pacific. Comparison between Leg 125 boninites and boninites and related rocks elsewhere in the Western Pacific highlights large regional differences in petrogenesis in terms of mantle mineralogy, degree of partial melting, composition of subduction components, and the nature of pre-subduction lithosphere. It is likely that, on a regional scale, the initiation of subduction involved subducted crust and lithospheric mantle wedge of a range of ages and compositions, as might be expected in this type of tectonic setting

Talc-dominated seafloor deposits reveal a new class of hydrothermal system

The Von Damm Vent Field (VDVF) is located on the flanks of the Mid-Cayman Spreading Centre, 13?km west of the axial rift, within a gabbro and peridotite basement. Unlike any other active vent field, hydrothermal precipitates at the VDVF comprise 85–90% by volume of the magnesium silicate mineral, talc. Hydrothermal fluids vent from a 3-m high, 1-m diameter chimney and other orifices at up to 215?°C with low metal concentrations, intermediate pH (5.8) and high concentrations (667?mmol?kg?1) of chloride relative to seawater. Here we show that the VDVF vent fluid is generated by interaction of seawater with a mafic and ultramafic basement which precipitates talc on mixing with seawater. The heat flux at the VDVF is measured at 487±101?MW, comparable to the most powerful magma-driven hydrothermal systems known, and may represent a significant mode of off-axis oceanic crustal cooling not previously recognized or accounted for in global models

Marine mineral exploration with controlled source electromagnetics at the TAG Hydrothermal Field, 26°N Mid‐Atlantic Ridge

Seafloor massive sulfide (SMS) deposits are of increasing economic interest in order to satisfy the relentless growth in worldwide metal demand. The Trans‐Atlantic Geotraverse (TAG) hydrothermal field at 26°N on the Mid‐Atlantic Ridge hosts several such deposits. This study presents new controlled source electromagnetic, bathymetric, and magnetic results from the TAG field. Potential SMS targets were selected based on their surface expressions in high‐resolution bathymetric data. High‐resolution reduced‐to‐the‐pole magnetic data show negative anomalies beneath and surrounding the SMS deposits, revealing large areas of hydrothermal alteration. Controlled source electromagnetic data, sensitive to the electrical conductivity of SMS mineralization, further reveal a maximum thickness of up to 80 m and conductivities of up to 5 S/m. SMS samples have conductivities of up to a few thousand Siemens per meter, suggesting that remotely inferred conductivities represent an average of metal sulfide ores combined with silicified and altered host basalt that likely dominates at greater depths

Transient transcriptional events in human skeletal muscle at the outset of concentric resistance exercise training

We sought to ascertain the time course of transcriptional events that occur in human skeletal muscle at the outset of resistance exercise (RE) training in RE naive individuals and determine whether the magnitude of response was associated with exercise-induced muscle damage. Sixteen RE naive men were recruited; eight underwent two sessions of 5 × 30 maximum isokinetic knee extensions (180°/s) separated by 48 h. Muscle biopsies of the vastus lateralis, obtained from different sites, were taken at baseline and 24 h after each exercise bout. Eight individuals acted as nonexercise controls with biopsies obtained at the same time intervals. Transcriptional changes were assessed by microarray and protein levels of heat shock protein (HSP) 27 and αB-crystallin in muscle cross sections by immunohistochemistry as a proxy measure of muscle damage. In control subjects, no probe sets were significantly altered (false discovery rate < 0.05), and HSP27 and αB-crystallin protein remained unchanged throughout the study. In exercised subjects, significant intersubject variability following the initial RE bout was observed in the muscle transcriptome, with greatest changes occurring in subjects with elevated HSP27 and αB-crystallin protein. Following the second bout, the transcriptome response was more consistent, revealing a cohort of probe sets associated with immune activation, the suppression of oxidative metabolism, and ubiquitination, as differentially regulated. The results reveal that the initial transcriptional response to RE is variable in RE naive volunteers, potentially associated with muscle damage and unlikely to reflect longer term adaptations to RE training. These results highlight the importance of considering multiple time points when determining the transcriptional response to RE and associated physiological adaptation

Ocean-floor sediments as a resource of rare earth elements: an overview of recently studied sites

The rare earth elements (REE), comprising 15 elements of the lanthanum series (La-Lu) together with yttrium (Y) and scandium (Sc), have become of particular interest because of their use, for example, in modern communications, renewable energy generation, and the electrification of transport. However, the security of supply of REE is considered to be at risk due to the limited number of sources, with dependence largely on one supplier that produced approximately 63% of all REE in 2019. As a result, there is a growing need to diversify supply. This has resulted in the drive to seek new resources elsewhere, and particularly on the deep-ocean floor. Here, we give a summary of REE distribution in minerals, versatile applications, and an update of their economic value. We present the most typical onshore methods for the determination of REE and examine methods for their offshore exploration in near real time. The motivation for this comes from recent studies over the past decade that showed ΣREE concentrations as high as 22,000 ppm in ocean-floor sediments in the Pacific Ocean. The ocean-floor sediments are evaluated in terms of their potential as resources of REE, while the likely economic cost and environmental impacts of deep-sea mining these are also considered

Distribution of and hydrographic controls on ferromanganese crusts: Tropic Seamount, Atlantic

Hydrogenetic ferromanganese crusts are likely to be exploited as resources for critical metals in the near future, yet the processes controlling where and how they grow are poorly understood. Using detailed mapping of seafloor outcrop and well constrained hydrographic modelling alongside scanning electron microscope imagery of samples from the Tropic Seamount, a star-shaped guyot located in the Tropical East Atlantic, we investigate the relationship between currents, ferromanganese crustal texture and the locations and intensity of crustal erosion. Here, we report the distribution of FeMn crusts and explore factors controlling their growth and erosion. We find that just over 35% of the summit plateau of the guyot exposes some form of ferromanganese crust mineralisation, with the rest variably covered by plains of mobile sediment and slim cliff exposures of carbonate. The steep flanks of the guyot largely expose ferromanganese crust both in situ and as debris flows. The strongest currents are located on the upper flanks of the guyot, the central part of its eastern limb, and across the summit plateau. Three categories of surface morphologies are identified; from pristine botryoidal surfaces to flat areas that have been completely polished by the erosive action of currents and sediment. The relationship between the outcrop of crusts, their erosional states and the hydrographic current regime to which they are exposed is complicated. There is a general correlation between the degree of erosion and location across the seamount, with the least eroded being found on the flanks below 2000 m water depth and the most heavily eroded crusts largely restricted to the summit area. Furthermore, the pristine samples all reside in areas that rarely experience current magnitudes over 0.2 m/s, suggesting that above this the currents have the ability to erode ferromanganese crust. However, there is a strong overlap between the measured current magnitudes at the locations of partially and completely eroded crusts, as well as partial overlap with the current magnitudes measured at pristine crust locations. This complexity is likely due to the presence of cliffs and plateaus increasing current magnitudes and turbidity at a scale smaller than the model resolution

The formation of gold-rich seafloor sulfide deposits: Evidence from the Beebe Hydrothermal Vent Field, Cayman Trough

The Beebe vent field (BVF) in the Cayman Trough has built an auriferous massive sulfide deposit on the ultra-slow spreading mid-Cayman spreading centre. The genesis of auriferous sulfide deposits at mid-ocean ridges is not fully understood, although there is a growing recognition that slow and ultra-slow spreading centres are conducive to gold mineralization. Analysis of hydrothermal precipitates from the BVF indicates that the highest gold contents are present within “beehive diffusers”, which have developed a highly porous pyrrhotite framework. The beehive structure allows vent fluids to effuse slowly, while allowing ingress of seawater to cool the fluid. The prevalence of pyrrhotite in the beehive samples, lack of sulfates, association between pyrrhotite and gold grains, and results of thermodynamic modelling, suggests gold precipitation occurred under highly reduced conditions even during mixing with seawater. In contrast, high temperature chimneys, with a single orifice, maintain high temperatures to the primary vent orifice and much of the gold is lost to seawater. Despite this, both chimney types are relatively gold enriched, which points to a further underlying cause for high gold at the BVF such as interaction of hydrothermal fluids with ultramafic lithologies in the basement. The final gold composition of the deposit is partially controlled by loss of gold during mass-wasting of the material, with gold depletion most prevalent in blocks formed at beehive-type chimneys. The BVF demonstrates that the overall gold content of a massive sulfide deposit is the sum of basement, precipitation, and surface processes