Nuclear gas dynamics in Arp 220 - sub-kiloparsec scale atomic hydrogen disks

We present new, high angular resolution (~0.22") MERLIN observations of neutral hydrogen (HI) absorption and 21-cm radio continuum emission across the central ~900 parsecs of the ultraluminous infrared galaxy, Arp220. Spatially resolved HI absorption is detected against the morphologically complex and extended 21-cm radio continuum emission, consistent with two counterrotating disks of neutral hydrogen, with a small bridge of gas connecting the two. We propose a merger model in which the two nuclei represent the galaxy cores which have survived the initial encounter and are now in the final stages of merging, similar to conclusions drawn from previous CO studies (Sakamoto, Scoville & Yun 1999). However, we suggest that instead of being coplanar with the main CO disk (in which the eastern nucleus is embedded), the western nucleus lies above it and, as suggested by bridge of HI connecting the two nuclei, will soon complete its final merger with the main disk. We suggest that the collection of radio supernovae (RSN) detected in VLBA studies in the more compact western nucleus represent the second burst of star formation associated with this final merger stage and that free-free absorption due to ionised gas in the bulge-like component can account for the observed RSN distribution. (Abridged)Comment: 26 pages including 8 figures and 1 table; accepted for publication in Ap

Block shear capacity of bolted connections in cold-reduced steel sheets

This paper examines the mechanisms for block shear failures of bolted connections in steel plates postulated in the design equations specified in the North American, European and Australian steel structures codes. It explains that there is only one feasible mechanism for the limit state of conventional block shear failure, that which involves tensile rupture and shear yielding, irrespective of the steel material ductility. It describes the fundamental shortcomings of various code equations for determining the block shear capacity of a bolted connection. Based on the tensile rupture and shear yielding mechanism, an in-plane shear lag factor, and the active shear resistance planes identified in the present work, this paper proposes a rational equation that is demonstrated to provide more accurate results compared to all the code equations in predicting the block shear capacities of bolted connections in G450 steel sheets subjected to concentric loading. The resistance factor of 0.8 for the proposed equation is computed with respect to the LRFD approach given in the North American specification for the design of cold-formed steel structures

Active Shear Planes in Block Shear Failure of Bolted Connections

In the AISI Specification for the Design of Cold-formed Steel Structural Members 2007, there are two types of shear planes used to determine the resistance of a bolted connection to block shear failure. When the block shear failure occurs by shear yielding and tensile rupture, the shear failure plane is taken to be the gross shear plane. Conversely, when the block shear failure is deemed to occur by simultaneous shear and tensile ruptures, the shear failure plane is assumed to be the net shear plane. Such an approach is not logical since the shear failure planes should be unique irrespective of the block shear failure mechanism. Through finite element analysis presented in this paper, the shear failure plane is shown to be neither the gross nor the net shear plane, and to be midway between the two shear planes assumed in design specifications. This shear failure plane is termed the active shear plane. The veracity of the active shear area is demonstrated in terms of the ability of the resulting block shear equation to predict the governing failure modes of test specimens consistently, in comparison against the equations assuming the gross and the net shear areas

Quantum sticking, scattering and transmission of 4He atoms from superfluid 4He surfaces

We develop a microscopic theory of the scattering, transmission, and sticking of 4He atoms impinging on a superfluid 4He slab at near normal incidence, and inelastic neutron scattering from the slab. The theory includes coupling between different modes and allows for inelastic processes. We find a number of essential aspects that must be observed in a physically meaningful and reliable theory of atom transmission and scattering; all are connected with multiparticle scattering, particularly the possibility of energy loss. These processes are (a) the coupling to low-lying (surface) excitations (ripplons/third sound) which is manifested in a finite imaginary part of the self energy, and (b) the reduction of the strength of the excitation in the maxon/roton region

Excitations in confined helium

We design models for helium in matrices like aerogel, Vycor or Geltech from a manifestly microscopic point of view. For that purpose, we calculate the dynamic structure function of 4He on Si substrates and between two Si walls as a function of energy, momentum transfer, and the scattering angle. The angle--averaged results are in good agreement with the neutron scattering data; the remaining differences can be attributed to the simplified model used here for the complex pore structure of the materials. A focus of the present work is the detailed identification of coexisting layer modes and bulk--like excitations, and, in the case of thick films, ripplon excitations. Involving essentially two--dimensional motion of atoms, the layer modes are sensitive to the scattering angle.Comment: Phys. Rev. B (2003, in press

Optical Imaging of Very Luminous Infrared Galaxy Systems: Photometric Properties and Late Evolution

A sample of 19 low redshift (0.03$<$z$<$0.07) very luminous infrared galaxy (VLIRG: $10^{11}L_\odot<$ L[8-1000 $\mu$m] $< 10^{12} L_\odot$) systems (30 galaxies) has been imaged in $B$, $V$, and $I$. These objects cover a luminosity range that is key to linking the most luminous infrared galaxies with the population of galaxies at large. We have obtained photometry for all of these VLIRG systems, the individual galaxies (when detached), and their nuclei, and the relative behavior of these classes has been studied in optical color-magnitude diagrams. The photometric properties of the sample are also compared with previously studied samples of ULIRGs. The mean observed photometric properties of VLIRG and ULIRG samples, considered as a whole, are indistinguishable at optical wavelengths. This suggests that not only ULIRG, but also the more numerous population of VLIRGs, have similar rest-frame optical photometric properties as the submillimeter galaxies (SMG), reinforcing the connection between low-{\it z} LIRGs -- high-{\it z} SMGs. When the nuclei of the {\it young} and {\it old} interacting systems are considered separately, some differences between the VLIRG and the ULIRG samples are found. In particular, the old VLIRGs are less luminous and redder than old ULIRG systems. If confirmed with larger samples, this behavior suggests that the late-stage evolution is different for VLIRGs and ULIRGs. Specifically, as suggested from spectroscopic data, the present photometric observations support the idea that the activity during the late phases of VLIRG evolution is dominated by starbursts, while a higher proportion of ULIRGs could evolve into a QSO type of object.Comment: 27 pages, 5 figures (degraded to reduce space). Figures 1 and 2 are multiple page figures (i.e. Fig 1a,b and Fig2a-g

Evolution of the far-infrared luminosity functions in the Spitzer Wide-area Infrared Extragalactic Legacy Survey

We present new observational determination of the evolution of the rest-frame 70 and 160 micron and total infrared (TIR) galaxy luminosity functions (LFs) using 70 micron data from the Spitzer Wide-area Infrared Extragalactic Legacy Survey (SWIRE). The LFs were constructed for sources with spectroscopic redshifts only in the XMM-LSS and Lockman Hole fields from the SWIRE photometric redshift catalogue. The 70 micron and TIR LFs were constructed in the redshift range 0<z<1.2 and the 160 micron LF was constructed in the redshift range 0<z<0.5 using a parametric Bayesian and the vmax methods. We assume in our models, that the faint-end power-law index of the LF does not evolve with redshifts. We find the the double power-law model is a better representation of the IR LF than the more commonly used power-law and Gaussian model. We model the evolution of the FIR LFs as a function of redshift where where the characteristic luminosity, $L^\ast$ evolve as \propto(1+z)^{\alpha_\textsc{l}}. The rest-frame 70 micron LF shows a strong luminosity evolution out to z=1.2 with alpha_l=3.41^{+0.18}_{-0.25}. The rest-frame 160 micron LF also showed rapid luminosity evolution with alpha_l=5.53^{+0.28}_{-0.23} out to z=0.5. The rate of evolution in luminosity is consistent with values estimated from previous studies using data from IRAS, ISO and Spitzer. The TIR LF evolves in luminosity with alpha_l=3.82^{+0.28}_{-0.16} which is in agreement with previous results from Spitzer 24 micron which find strong luminosity evolution. By integrating the LF we calculated the co-moving IR luminosity density out to z=1.2, which confirm the rapid evolution in number density of LIRGs and ULIRGs which contribute ~68^{+10}_{-07} % to the co-moving star formation rate density at z=1.2. Our results based on 70 micron data confirms that the bulk of the star formation at z=1 takes place in dust obscured objects.Comment: 17 pages, 14 figure

Submillimeter Observations of the Ultraluminous BAL Quasar APM 08279+5255

With an inferred bolometric luminosity of 5\times10^{15}{\rm \lsun}, the recently identified z=3.87, broad absorption line quasar APM 08279+5255 is apparently the most luminous object currently known. As half of its prodigious emission occurs in the infrared, APM 08279+5255 also represents the most extreme example of an Ultraluminous Infrared Galaxy. Here, we present new submillimeter observations of this phenomenal object; while indicating that a vast quantity of dust is present, these data prove to be incompatible with current models of emission mechanisms and reprocessing in ultraluminous systems. The influence of gravitational lensing upon these models is considered and we find that while the emission from the central continuum emitting region may be significantly enhanced, lensing induced magnification cannot easily reconcile the models with observations. We conclude that further modeling, including the effects of any differential magnification is required to explain the observed emission from APM 08279+5255.Comment: 12 Pages with Two figures. Accepted for publication in the Astrophysical Journal Letter

Modeling the growth of multicellular cancer spheroids in a\ud bioengineered 3D microenvironment and their treatment with an\ud anti-cancer drug

A critical step in the dissemination of ovarian cancer cells is the formation of multicellular spheroids from cells shed from the primary tumor. The objectives of this study were to establish and validate bioengineered three-dimensional (3D) microenvironments for culturing ovarian cancer cells in vitro and simultaneously to develop computational models describing the growth of multicellular spheroids in these bioengineered matrices. Cancer cells derived from human epithelial ovarian carcinoma were embedded within biomimetic hydrogels of varying stiffness and cultured for up to 4 weeks. Immunohistochemistry was used to quantify the dependence of cell proliferation and apoptosis on matrix stiffness, long-term culture and treatment with the anti-cancer drug paclitaxel.\ud \ud Two computational models were developed. In the first model, each spheroid was treated as an incompressible porous medium, whereas in the second model the concept of morphoelasticity was used to incorporate details about internal stresses and strains. Each model was formulated as a free boundary problem. Functional forms for cell proliferation and apoptosis motivated by the experimental work were applied and the predictions of both models compared with the output from the experiments. Both models simulated how the growth of cancer spheroids was influenced by mechanical and biochemical stimuli including matrix stiffness, culture time and treatment with paclitaxel. Our mathematical models provide new perspectives on previous experimental results and have informed the design of new 3D studies of multicellular cancer spheroids