260 research outputs found
The influence of piezoceramic stack location on nonlinear behavior of langevin transducers
Power ultrasonic applications such as cutting, welding, and sonochemistry often use Langevin transducers to generate power ultrasound. Traditionally, it has been proposed that the piezoceramic stack of a Langevin transducer should be located in the nodal plane of the longitudinal mode of vibration, ensuring that the piezoceramic elements are positioned under a uniform stress during transducer operation, maximizing element efficiency and minimizing piezoceramic aging. However, this general design rule is often partially broken during the design phase if features such as a support flange or multiple piezoceramic stacks are incorporated into the transducer architecture. Meanwhile, it has also been well documented in the literature that power ultrasonic devices driven at high excitation levels exhibit nonlinear behaviors similar to those observed in Duffing-type systems, such as resonant frequency shifts, the jump phenomenon, and hysteretic regions. This study investigates three Langevin transducers with different piezoceramic stack locations by characterizing their linear and nonlinear vibrational responses to understand how the stack location influences nonlinear behavior
Modelling cascading failures in lifelines using temporal networks
Lifelines are critical infrastructure systems with high interdependency. During a disaster, the interdependency between the lifelines can lead to cascading failures. In the literature, the approaches used to analyze infrastructure interdependencies within the social, political, and economic domains do not properly describe the infrastructuresâ emergency management. During an emergency, the response phase is very condensed in time, and the failures that occur are usually amplified through cascading effects in the long-term period. Because of these peculiarities, interdependencies need to be modeled considering the time dimension. The methodology proposed in this paper is based on a modified version of the Input-output Inoperability Model. The lifelines are modeled using graph theory, and perturbations are applied to the elements of the graph, simulating natural or man-made disasters. The cascading effect among the interdependent networks has been simulated using a spatial multilayer approach. The adjancency tensor has been used to for the temporal dimension and its effects. Finally, the numerical results of the simulations with the proposed model are represented by probabilities of failure for each node of the system. As a case study, the methodology has been applied to a nuclear power plant. The model can be adopted to run analysis at different scales, from the regional to the local scales
Graduate Recital:Sharon A. Slote, Trumpet Gloria Cardoni, Harpsichord and Piano
Kemp Recital Hall Saturday Evening April 19, 1997 5:30p.m
Arterial hypertension increases left ventricular mass: role of tight blood pressure control
n/
A numerical solution for addressing the overturning phenomena of heritage assets
Historical heritage represent a crucial aspect for societies and therefore it should be preserved from natural disasters such as earthquake. Base isolation systems are widely used to mitigate the horizontal effects of strong ground motions on important buildings and bridges, but there are also interesting applications on statues. However, such systems are characterized by properties that are quite different from the ones that belong to traditional civil structures. For this reason, national and international regulations are not exhaustive and actual dynamics of the system should be studied through numerical and experimental methods. Starting from analytical formulations, the paper investigates the sliding and rocking motion in details, being the typical one of statues under seismic loads. The presented numerical model describes the problem and is an alternative to the analytical formulation to perform several analyses automatically. In addition, it allows running parametric analyses to assess the influence of various parameters, such as eccentricity, stiffness, mass, geometric ratios, etc. Future work is geared to validate the numerical model trough performing experimental tests on shaking table
Experimental Investigation of the Static and Dynamic behaviors of 3D-Printed Shell Structures
Over the last years, several optimization strategies were conducted to find the optimal shape minimizing internal stress or total weight (volume) of shell structures. In recent times, this structure typology gained a great importance among researchers and the scientific community for the renowed interest in the form-findind optimization of column-free space solution for large span roofing constructions. In the present paper, a form-finding of a shallow grid shells was introduced basing on the multy-body rope approach (MRA) for the definitions of vault shapes and different hole percentage. In order to obtain an experimental validation, a physical model was reproduced at the laboratory scale performing ad hoc measurements to compare the observed respect to the simulated behaviour. A 3D printing procedure based on the Fuse Deposition Modeling (FDM) technique in polylactide (PLA) material was used to realise form-works of the cement based blocks of the scaled prototype. Several static and dynamic load configurations are investigated, collecting into a sensitivity analysis the parameters which mainly affect the structural behaviour. To simulate earthquake ground motion an assigned frequency range as dynamic input to the structure was provided by a shaking table. Finally, some preliminary considerations of the dynamic response of the model were provided testing the robustness of the form-finding approach when horizontal load are taken into account
Resilience Assessment of City-Scale Transportation Networks Using Monte Carlo Simulation
To improve the resilience of critical infrastructure systems, their intrinsic properties need to be understood and their resilience state needs be identified. In the literature, several methods to evaluate networksâ reliability and resilience can be found. However, the applicability of these methods is usually restricted to small-size net-works. In this paper, the transportation network of a large-scale virtual city is considered as a case study. A random removal of the roads is applied simulating the networkâs failure. The network reliability is then calculated using the Destruction Spectrum (D-spectrum) method and a Monte Carlo approach has been developed to generate failure permutations that are necessary for the evaluation of the D-spectrum se. In addition, the Birnbaum Importance Measure (BIM) has been adopted in this study to determine the importance of the net-workâs components. The methodology adopted in this study can be also extended to all network-based systems. The paper also introduces resilience indicators as a soft tool to predict the performance and serviceability of transportation networks
Integrated platform to assess seismic resilience at the community level
Due to the increasing frequency of disastrous events, the challenge of creating large-scale simulation models has become of major significance. Indeed, several simulation strategies and methodologies have been recently developed to explore the response of communities to natural disasters. Such models can support decision-makers during emergency operations allowing to create a global view of the emergency identifying consequences. An integrated platform that implements a community hybrid model with real-time simulation capabilities is presented in this paper. The platform's goal is to assess seismic resilience and vulnerability of critical infrastructures (e.g., built environment, power grid, socio-technical network) at the urban level, taking into account their interdependencies. Finally, different seismic scenarios have been applied to a large-scale virtual city model. The platform proved to be effective to analyze the emergency and could be used to implement countermeasures that improve community response and overall resilience
5S-IGS rDNA in wind-pollinated trees (Fagus L.) encapsulates 55 million years of reticulate evolution and hybrid origins of modern species
Standard models of plant speciation assume strictly dichotomous genealogies in which a species, the ancestor, is replaced by two offspring species. The reality in windâpollinated trees with long evolutionary histories is more complex: species evolve from other species through isolation when genetic drift exceeds gene flow; lineage mixing can give rise to new species (hybrid taxa such as nothospecies and allopolyploids). The multiâcopy, potentially multiâlocus 5S rDNA is one of few gene regions conserving signal from dichotomous and reticulate evolutionary processes down to the level of intraâgenomic recombination. Therefore, it can provide unique insights into the dynamic speciation processes of lineages that diversified tens of millions of years ago. Here, we provide the first highâthroughput sequencing (HTS) of the 5S intergenic spacers (5SâIGS) for a lineage of windâpollinated subtropical to temperate trees, the Fagus crenata â F. sylvatica s.l. lineage, and its distant relative F. japonica. The observed 4963 unique 5SâIGS variants reflect a complex history of hybrid origins, lineage sorting, mixing via secondary gene flow, and intraâgenomic competition between two or more paralogousâhomoeologous 5S rDNA lineages. We show that modern species are genetic mosaics and represent a striking case of ongoing reticulate evolution during the past 55 million years
Valutazione dellâesposizione a sostanze chimiche: il ruolo del monitoraggio biologico in lavoratori esposti a TCE.
Lâobiettivo di questo studio era esaminare i profili di un gruppo di lavoratori di un reparto di manutenzione di unâindustria aeronautica espostio a tricloroetilene (TCE) dopo il 2001/59/ce ed il DL n. 197 06/14/2002, e di verificare lâutilitĂ e la validitĂ del monitoraggio biologico come fattore determinante per la sicurezza degli operatori
- âŠ