24 research outputs found
The arabic version of the Personality Inventory for the DSM-5 (PID-5) in a clinical sample of United Arab Emirates (UAE) nationals
Objectives: We aimed to test the potential of the Arabic version of the PID-5 to distinguish between clinical and non-clinical participants, as well as to examine its convergent validity and factor structure in an Emirati clinical sample. Methods: The Arabic version of the PID-5 was administered to a clinical sample comprised of 156 participants (Mage = 31.38, SD = 8.99, 37.8% male, 62.2% female) and a community sample also comprised of 156 participants (Mage = 31.43, SD = 9.52, 37.2% male, 62.8% female). We addressed the descriptive measures, internal consistency, mean rank scores differences, convergent validity with SCL-90-R, and PID-5's factor structure. Results: As expected, the clinical sample presented statistically significantly higher scores than the non-clinical sample, with medium to high effect sizes. In addition, all the PID-5 domains showed positive correlations with most of the symptomatic constellations of the SCL-90-R as well as the PID-5 facets with all their SCL-90-R counterparts. However, our findings did not entirely replicate the PID-5 original 5-factor structure, as only a 4-factor solution was retained. Conclusions: Future studies with the Arabic PID-5 in clinical samples are needed to understand its relevance and clinical utility in Arabic countries.info:eu-repo/semantics/publishedVersio
The Arabic Version of the Personality Inventory for the DSM-5 (PID-5) in a Clinical Sample of United Arab Emirates (UAE) Nationals
Objectives: We aimed to test the potential of the Arabic version of the PID-5 to distinguish between clinical and non-clinical participants, as well as to examine its convergent validity and factor structure in an Emirati clinical sample. Methods: The Arabic version of the PID-5 was administered to a clinical sample comprised of 156 participants (Mage = 31.38, SD = 8.99, 37.8% male, 62.2% female) and a community sample also comprised of 156 participants (Mage = 31.43, SD = 9.52, 37.2% male, 62.8% female). We addressed the descriptive measures, internal consistency, mean rank scores differences, convergent validity with SCL-90-R, and PID-5\u27s factor structure. Results: As expected, the clinical sample presented statistically significantly higher scores than the non-clinical sample, with medium to high effect sizes. In addition, all the PID-5 domains showed positive correlations with most of the symptomatic constellations of the SCL-90-R as well as the PID-5 facets with all their SCL-90-R counterparts. However, our findings did not entirely replicate the PID-5 original 5-factor structure, as only a 4-factor solution was retained. Conclusions: Future studies with the Arabic PID-5 in clinical samples are needed to understand its relevance and clinical utility in Arabic countries
Cross-cultural Study of the Personality Inventory for the DSM-5 (PID-5) across the Portuguese and the United Arab Emirates (UAE) Community and Clinical Populations
Aims: The present paper focused on compare the PID-5 mean score levels across two matched community and clinical samples of Portugal and the UAE. Background: The generalizability and universality of the Alternative Model of Personality Disorders has been thoroughly studied through the Personality Inventory for DSM-5 (PID-5) across countries and languages. However, studies comparing Western and Middle Eastern countries are still limited, in particular those who assess the PID-5 measurement invariance. Objectives: We examined measurement invariance of the PID-5 scales across matched Emirati and Portuguese clinical and nonclinical groups, as well as compare and contrast the PID-5 mean score levels across both countries and samples. Methods: The Arabic and the Portuguese versions of the PID-5 was administered to Emirati community participants (N = 300, 80% women and 20% men, Mage = 27.95) which were matched with Portuguese community participants (N = 300, 80.3% women and 19.7% men, Mage = 28.96), as well as clinical participants of the UAE (N = 150, 61.3% women and 38.7% men, Mage = 31.29) and Portugal (N = 150, 52% men and 48% women, Mage = 44.97). We examined measurement invariance through an unrestricted Factor Analysis based program, and mean scores levels were compared and analyzed. Results: Our findings supported the PID-5 measurement invariance across the Emirati and Portuguese clinical samples pointing to the universality and generalizability of the Alternative Model of Personality Disorders. The Emirati psychiatric sample exhibited somehow higher results than the Portuguese psychiatric participants, albeit the small effect size for most of the PID-5 scales. Conclusion: Further research is needed to examine the applicability of the PID-5 across non-clinical representative samples of Portugal and the UAE, and other Middle Eastern countries
Synergistic effects of activated carbon and nano-zerovalent copper on the performance of hydroxyapatite-alginate beads for the removal of As\u3csup\u3e3+\u3c/sup\u3e from aqueous solution
© 2019 Elsevier Ltd In this study, activated carbon (AC) and nano-zerovalent copper (nZVCu) functionalized hydroxyapatite (HA) and alginate beads were synthesized and used for the removal of As3+ from aqueous solution. The characterization by X-ray diffraction, scanning electron microscopy, X-ray energy dispersive spectroscopy, X-ray photoelectron spectroscopy, transmission electron microscopy, high resolution transmission electron microscopy, BET surface area analysis, thermogravimetric analysis, and Fourier transform infrared spectroscopy revealed successful formation of the AC/nZVCu/HA-alginate, nZVCu/HA-alginate, AC/HA-alginate, and HA-alginate beads. The scanning electron microscopy and surface analysis revealed the prepared beads to be highly mesoporous which led to the maximum adsorption of As3+, i.e., 13.97, 29.33, 30.96, and 39.06 mg/g by HA-alginate, AC/HA-alginate, nZVCu/HA-alginate, and AC/nZVCu/HA-alginate beads, respectively. The thermogravimteric analysis showed the nZVCu/HA-alginate beads to be highly stable while the AC composite beads as the least stable to heat treatment. The HA-alginate beads achieved 39% removal of As3+, however, removal efficiency was promoted to 95% by coupling AC and nZVCu with HA-alginate beads at a reaction time of 120 min. The removal of As3+ by the prepared AC & nZVCu coupled HA-alginate beads was promoted with increasing [As3+]0 and [AC/nZVCu/HA-alginate]0. The pH of aqueous solution significantly influenced the removal of As3+ by AC/nZVCu/HA-alginate beads and maximum removal was achieved at pH 5.8. Freundlich adsorption isotherm and pseudo-second-order kinetic models were found to best fit the removal of As3+ by the synthesized beads. The high performance of AC/nZVCu/HA-alginate beads in the removal of As3+ even after seven cyclic treatment as well as least leaching of Cu ions into aqueous solution suggest enhanced reusability and stability of HA-alginate beads by coupling with AC and nZVCu. The results suggest that the synthesized beads have good potential for the removal of As3+ from aqueous solutions
Optimizing the oxide support composition in Pr-doped CeO2 towards highly active and selective Ni-based CO2 methanation catalysts
In this study, Ni catalysts supported on Pr-doped CeO2 are studied for the CO2 methanation reaction and the effect of Pr doping on the physicochemical properties and the catalytic performance is thoroughly evaluated. It is shown, that Pr3+ ions can substitute Ce4+ ones in the support lattice, thereby introducing a high population of oxygen vacancies, which act as active sites for CO2 chemisorption. Pr doping can also act to reduce the crystallite size of metallic Ni, thus promoting the active metal dispersion. Catalytic performance evaluation evidences the promoting effect of low Pr loadings (5 at% and 10 at%) towards a higher catalytic activity and lower CO2 activation energy. On the other hand, higher Pr contents negate the positive effects on the catalytic activity by decreasing the oxygen vacancy population, thereby creating a volcano-type trend towards an optimum amount of aliovalent substitution.AIΤ, NDC and MAG acknowledge support of this work by the project “Development of new innovative low carbon energy technologies to improve excellence in the Region of Western Macedonia” (MIS 5047197) which is implemented under the Action “Reinforcement of the Research and Innovation Infrastructure”, funded by the Operational Program “Competitiveness, Entrepreneurship and Innovation” (NSRF 2014-2020) and co-financed by Greece and the European Union (European Regional Development Fund).Peer reviewe
Selective catalytic deoxygenation of palm oil to produce green diesel over Ni catalysts supported on ZrO2 and CeO2–ZrO2: Experimental and process simulation modelling studies
The selective deoxygenation of palm oil to produce green diesel has been investigated over Ni catalysts supported on ZrO2 (Ni/Zr) and CeO2–ZrO2 (Ni/CeZr) supports. The modification of the support with CeO2 acted to improve the Ni dispersion and oxygen lability of the catalyst, while reducing the overall surface acidity. The Ni/CeZr catalyst exhibited higher triglyceride (TG) conversion and yield for the desirable C15–C18 hydrocarbons, as well as improved stability compared to the unmodified Ni/Zr catalyst, with TG conversion and C15–C18 yield remaining above 85% and 80% respectively during 20 h of continuous operation at 300 oC. The high C17 yields also revealed the dominance of the deCOx (decarbonylation/decarboxylation) pathway. A fully comprehensive process simulation model has been developed to validate the experimental findings in this study, and a very good validation with the experimental data has been demonstrated. The model was then further utilised to investigate the effects of temperature, H2 partial pressure, H2/oil feed ratio and LHSV. The model predicted that maximum triglyceride conversion was attainable at reaction conditions of 300 °C temperature, 30 bar H2 partial pressure, H2/oil of 1000 cm3/cm3 feed ratio and 1.2 h−1 LHSV.MAG and NDC gratefully acknowledge that this researched was co-financed by Greece and the European Union (European Social Fund-ESF) through the Operational Programme “Human Resources Development, Education and Lifelong Learning” (MIS-5050170). KP and SA acknowledge the financial support from the Abu Dhabi Department of Education and Knowledge through the grant AARE-2019-233 and the support from Khalifa University through the grant RC2-2018-024. VS acknowledges the ICTS ELECMI-LMA for offering access to their instruments and expertise.Peer reviewe
Continuous selective deoxygenation of palm oil for renewable diesel production over Ni catalysts supported on Al2O3 and La2O3–Al2O3
The present study provides, for the first time in the literature, a comparative assessment of the catalytic performance of Ni catalysts supported on γ-Al2O3 and γ-Al2O3 modified with La2O3, in a continuous flow trickle bed reactor, for the selective deoxygenation of palm oil. The catalysts were prepared via the wet impregnation method and were characterized, after calcination and/or reduction, by N2 adsorption/desorption, XRD, NH3-TPD, CO2-TPD, H2-TPR, H2-TPD, XPS and TEM, and after the time-on-stream tests, by TGA, TPO, Raman and TEM. Catalytic experiments were performed between 300–400 °C, at a constant pressure (30 bar) and different LHSV (1.2–3.6 h−1). The results show that the incorporation of La2O3 in the Al2O3 support increased the Ni surface atomic concentration (XPS), affected the nature and abundance of surface basicity (CO2-TPD), and despite leading to a drop in surface acidity (NH3-TPD), the Ni/LaAl catalyst presented a larger population of medium-strength acid sites. These characteristics helped promote the SDO process and prevented extended cracking and the formation of coke. Thus, higher triglyceride conversions and n-C15 to n-C18 hydrocarbon yields were achieved with the Ni/LaAl at lower reaction temperatures. Moreover, the Ni/LaAl catalyst was considerably more stable during 20 h of time-on-stream. Examination of the spent catalysts revealed that both carbon deposition and degree of graphitization of the surface coke, as well as, the extent of sintering were lower on the Ni/LaAl catalyst, explaining its excellent performance during time-on-stream
Highly selective and stable Ni/La-M (M=Sm, Pr, and Mg)-CeO2 catalysts for CO2 methanation
In the study presented herein, nickel catalysts supported on CeO2 and, for the first time in the literature, on La2O3-Sm2O3-CeO2, La2O3-Pr2O3-CeO2 and La2O3-MgO-CeO2 were prepared and evaluated for the reaction of CO2 methanation. The carriers were prepared through a sol-gel microwave assisted method and the catalysts were obtained following wet impregnation. The physicochemical properties of the catalysts prior to reaction were determined through H2-TPR, H2-TPD, Raman spectroscopy, XRD, CO2-TPD, N2 physisorption-desorption, XPS and TEM. The spent catalysts, after the time-on-stream experiments were further characterised using TEM and TGA. It was shown that the simultaneous incorporation of La3+, Pr3+ and La3+, Sm3+ into the crystal structure of cerium oxide created higher population of oxygen vacant sites. Moreover, the co-presence of La3+, Mg2+ and La3+, Pr3+ into the CeO2 increased the plethos of moderate basic sites. These physicochemical properties increased the rate of CO2 methanation reaction at relatively low temperatures. Furthermore, it is argued that the addition of La3+ stabilized the Ni active sites via the probable formation of a new compound (La-O-Ni) on the catalyst surface or synergetic catalytic centers at the interfacial area improving the catalytic properties (activity and stability). Finally, the catalytic performance tests revealed that the addition of La3+ mainly improved the conversion of CO2 and yield of CH4 for the Ni/La-Mg-Ce and Ni/La-Sm-Ce samples. The rCO2 and XCO2 values at 300 °C followed the order Ni/La-Sm-Ce >> Ni/La-Mg-Ce > Ni/La-Pr-Ce > Ni/Ce.GIS is grateful for financial support by Greece and ESF through the Operational Programme «Human Resources Development, Education and Lifelong Learning» in the context of the project “Strengthening Human Resources Research Potential via Doctorate Research” (MIS-5000432), implemented by the State Scholarships Foundation (IKY). MAG is grateful to the Regional Excellence program (MIS 5047197), which is implemented under the Action “Reinforcement of the Research and Innovation Infrastructure”, funded by the Operational Programme "Competitiveness, Entrepreneurship and Innovation" (NSRF 2014-2020) and co-financed by Greece and the European Union (European Regional Development Fund). IVY and NDC are grateful for financial support from the European Union and Greek national funds through the operational program Competitiveness, Entrepreneurship and Innovation, under the call Research-Create-Innovate (Project code: T1EDK-00782). SAK and KP acknowledge the financial support from the Abu Dhabi Department of Education and Knowledge (ADEK) under the AARE 2019-233 grant and support by the Khalifa University of Science and Technology under Award No. RC2-2018-024.Peer reviewe
Highly selective and stable nickel catalysts supported on ceria promoted with Sm2O3, Pr2O3 and MgO for the CO2 methanation reaction
The present work reports on the investigation of the catalytic performance for the methanation of CO2 over Ni catalysts based on CeO2, and for the first time, of Ni catalysts supported on binary CeO2-based oxides, namely, Sm2O3-CeO2, Pr2O3-CeO2 and MgO-CeO2. The supports were obtained using the microwave assisted sol-gel method under reflux, while the catalysts were prepared by the wet impregnation method. For the investigation of the morphological, textural, structural and other intrinsic properties of the catalytic materials a variety of characterization techniques were used, i.e., Raman spectroscopy, XRD, N2 physisorption-desorption, CO2-TPD, H2-TPR, H2-TPD, XPS and TEM. Carbon deposition and sintering were investigated using TEM. It was shown that the addition of Sm3+ or Pr3+, incorporated into the lattice of CeO2, generated oxygen vacancies, but the Ni/Pr-Ce catalyst was found to possess more surface oxygen vacancies (e.g. Ce4+-Ov-Pr3+ entities). Moreover, modification of CeO2 using Sm3+ or Pr3+ restricted the agglomeration of nickel active sites and led to the genesis of Lewis basic positions. These characteristics improved the hydrogenation reaction at lower temperature. On the other hand, the addition of Mg2+ resulted at strong metal support interactions reinforcing the resistance of the Ni/Mg-Ce catalyst against sintering. Furthermore, the addition of Sm3+, Pr3+ and Mg2+ cations increased the overall basicity and the moderate adsorption sites and led to the formation of smaller Ni nano particles; these physico-chemical properties enhanced the CO2 methanation reaction. Finally, the activity experiments (WGHSV = 25,000 mL g−1 h−1, H2/CO2 = 4:1, T =350 °C) showed that at lower reaction temperature the Ni/Pr-Ce had the highest catalytic performance in terms of CO2 conversion (54.5%) and CH4 yield (54.5%) and selectivity (100%). The TOF values were found to follow the order Ni/Pr-Ce >> Ni/Mg-Ce > Ni/Sm-Ce > Ni/Ce.GIS is grateful for financial support by Greece and ESF through the Operational Programme «Human Resources Development, Education and Lifelong Learning» in the context of the project “Strengthening Human Resources Research Potential via Doctorate Research” (MIS-5000432), implemented by the State Scholarships Foundation (IKY). NDC is grateful to the Research Committee of UOWM for financial support through grant no. 80304. IVY and MAG are grateful for financial support from the European Union and Greek national funds through the operational program Competitiveness, Entrepreneurship and Innovation, under the call Research-Create-Innovate (Project code: T1EDK-00782). SAK, AAK and KP acknowledge the financial support from the Abu Dhabi Department of Education and Knowledge (ADEK) under the AARE 2019-233 grant and support by the Khalifa University of Science and Technology under Award No. RC2-2018-024.Peer reviewe
Cross-cultural Study of the Personality Inventory for the DSM-5 (PID-5) across the Portuguese and the United Arab Emirates (UAE) Community and Clinical Populations
Aims:
The present paper focused on compare the PID-5 mean score levels across two matched community and clinical samples of Portugal and the UAE.
Background:
The generalizability and universality of the Alternative Model of Personality Disorders has been thoroughly studied through the Personality
Inventory for DSM-5 (PID-5) across countries and languages. However, studies comparing Western and Middle Eastern countries are still limited,
in particular those who assess the PID-5 measurement invariance.
Objectives:
We examined measurement invariance of the PID-5 scales across matched Emirati and Portuguese clinical and nonclinical groups, as well as
compare and contrast the PID-5 mean score levels across both countries and samples.
Methods:
The Arabic and the Portuguese versions of the PID-5 was administered to Emirati community participants (N = 300, 80% women and 20% men,
Mage = 27.95) which were matched with Portuguese community participants (N = 300, 80.3% women and 19.7% men, Mage = 28.96), as well as
clinical participants of the UAE (N = 150, 61.3% women and 38.7% men, Mage = 31.29) and Portugal (N = 150, 52% men and 48% women, Mage =
44.97). We examined measurement invariance through an unrestricted Factor Analysis based program, and mean scores levels were compared and
analyzed.
Results:
Our findings supported the PID-5 measurement invariance across the Emirati and Portuguese clinical samples pointing to the universality and
generalizability of the Alternative Model of Personality Disorders. The Emirati psychiatric sample exhibited somehow higher results than the
Portuguese psychiatric participants, albeit the small effect size for most of the PID-5 scales.
Conclusion:
Further research is needed to examine the applicability of the PID-5 across non-clinical representative samples of Portugal and the UAE, and other
Middle Eastern countries.info:eu-repo/semantics/publishedVersio