3,458 research outputs found
Role and distribution of different Ba-containing phases in supported Pt-Ba NSR catalysts
Pt-Ba/MeO (where MeO=Al2O3, CeO2, SiO2 and ZrO2) NO x storage-reduction catalysts with Ba-loading varying from 0wt.% to 28wt.% were investigated concerning stability of Ba phases and NO x storage-reduction efficiency. For Pt-Ba/Al2O3 three different Ba-containing phases with different thermal stability are distinguished based on their interaction with the support. The relative concentration of these phases varies with the Ba-loading and NO x storage tests indicated that the BaCO3 phase decomposing between 400°C and 800°C (LT-BaCO3) is the most efficient Ba containing phase for NO x storage. Similar investigations of Pt-Ba catalysts supported on CeO2, SiO2 and ZrO2 showed that the relative amount of LT-BaCO3 phase depends also on the support material. NO x storage measurements confirmed a correlation between the concentration of LT-BaCO3 and NO x storage efficiency. Basicity and textural properties of the support are identified as crucial parameters for efficient NO x storage catalyst
The Role Body-Esteem Plays in Impairment Associated with Hair-Pulling and Skin Picking in Adolescents
Trichotillomania (hair pulling disorder, HPD) and pathological skin picking (PSP) are associated with significant rates of psychosocial impairment and distress. Little research has addressed the physical consequences and associated impairment in youth (e.g., poor body-esteem). The present study explores the relationship between body-esteem, skin picking (SP), and pulling-related impairment in a sample of adolescents with primary HPD. Ninety four adolescents who pull their hair, 40 of whom also pick their skin, were recruited via internet-sampling as part of the Child and Adolescent Trichotillomania Impact Study (CA-TIP). All youth and a parent completed anonymous questionnaires online assessing psychiatric symptoms, repetitive behaviors, and psychosocial impairment, among other variables. Appearance-based body-esteem was not found to be predictive of more severe psychosocial impairment in these youth. However, SP, in combination with HPD, contributed to worse appearance-based body-esteem above and beyond symptoms of HPD alone. The current study suggests that psychosocial functioning in youth with HPD is less impacted by body-esteem or pulling than other factors (e.g., depression and anxiety), and that SP contributes to lowered body-esteem. These findings suggest the importance of addressing body-esteem in case conceptualization for youth with both HPD and SP. Further research is required to confirm these suggestions
On the reconstruction of diagonal elements of density matrix of quantum optical states by on/off detectors
We discuss a scheme for reconstructing experimentally the diagonal elements
of the density matrix of quantum optical states. Applications to PDC heralded
photons, multi-thermal and attenuated coherent states are illustrated and
discussed in some details.Comment: 10 pages, presented at Palermo "TQMFA2005" Conference. To appear on
"Open Systems & Information Dynamics" (2006
From asking to observing. Behavioural measures of socio-emotional and motivational skills in large-scale assessments
Socio-emotional and motivational skills are routinely measured using self-reports in large-scale educational assessments. Measures exploiting test-takers’ behaviour during the completion of questionnaires or cognitive tests are increasingly used as alternatives to self-reports in the economics of education literature. We compute behavioural measures of socio-emotional and motivational skills using data from the Programme for International Student Assessment (PISA). We find that these measures capture important aspects of students' academic profiles: some are importantly associated with contemporaneous performance and educational attainment and most measures have a high degree of stability over time. However, these measures are only limitedly correlated among themselves and have low correlations with self-report measures of the same constructs. This is likely a reflection of the fact that behavioural measures are representations of the test taker current ‘state’, rather than descriptions of the participant view of their own ‘trait’ like the self-report measures. Moreover, the low correlation across measures suggests that they capture different behavioural responses to the test-taking situation. These differences are still limitedly understood because the measures are constructed ex-post using collateral information collected during the administration of assessments rather than developed ex ante in line with theoretical models of human cognition and affect
Quantum state reconstruction using binary data from on/off photodetection
The knowledge of the density matrix of a quantum state plays a fundamental
role in several fields ranging from quantum information processing to
experiments on foundations of quantum mechanics and quantum optics. Recently, a
method has been suggested and implemented in order to obtain the reconstruction
of the diagonal elements of the density matrix exploiting the information
achievable with realistic on/off detectors, e.g. silicon avalanche
photo-diodes, only able to discriminate the presence or the absence of light.
The purpose of this paper is to provide an overview of the theoretical and
experimental developments of the on/off method, including its extension to the
reconstruction of the whole density matrix.Comment: revised version, 11 pages, 6 figures, to appear as a review paper on
Adv. Science Let
Urgent Need for Reduction in Greenhouse Gas Emissions in Industrial Processes: Are We Past the Tipping Point for Global Warming?
In a previous Guest Editorial (Piacentini and Mujumdar, 2007) and an article (Piacentini and Mujumdar, 2009), we analyzed the relation between climate change and industrial processes, mainly related to drying.Fil: Piacentini, Ruben Dario Narciso. Consejo Nacional de Investigaciones CientÃficas y Técnicas. Centro CientÃfico Tecnológico Rosario. Instituto de FÃsica de Rosario (i); Argentina. Consejo Nacional de Investigaciones CientÃficas y Técnicas. Oficina de Coordinación Administrativa Ciudad Universitaria. Instituto de QuÃmica, FÃsica de los Materiales, Medioambiente y EnergÃa; ArgentinaFil: Mujumdar, A. S. . Minerals, Metals & Materials Technology Centre ; Singapur. Institute of Chemical Technology; Indi
Occupational Sitting and Physical Activity Among University Employees
International Journal of Exercise Science 7(4) : 295-301, 2014. The prevalence of overweight and obese in the U.S. has been thoroughly documented. With the advent of inactivity physiology research and the subsequent interest in sedentary behavior, the work environment has come under closer scrutiny as a potential opportunity to reverse inactivity. Therefore, the purpose of this study was to determine the sitting and physical activity (PA) habits among different classifications of university employees. University employees (n=625) completed an online survey based on the Occupational Sitting and Physical Activity Questionnaire (OSPAQ). Participants were instructed to describe time spent sitting, standing, walking, and in heavy physical labor during the last seven days, along with the number of breaks from sitting taken per hour. To establish habitual patterns of PA outside of work, employees recalled their participation in structured PA in the past seven days. Prior to data analysis, employees were categorized as Administration, Faculty, Staff, or Facilities Management. Statistically significant differences were found among employee classifications for min sit/d, p\u3c.001; min stand/d, p\u3c.001; min walk/d, p\u3c.001; and min heavy labor/d, p\u3c.001. No significant differences were found for breaks/h from sitting, p=.259 or participation in structured PA, p=. 33. With the exception of facilities management workers, university employees spent 75% of their workday seated. In conjunction with low levels of leisure time PA, university employees appear to be prime candidates for workplace interventions to reduce physical inactivity
Role of support in lean DeNO x catalysis
FTIR and pulse thermal analysis were applied to investigate catalysts containing Pt (1 wt%)/Ba (17 wt%) supported on γ−Al2O3, SiO2 and ZrO2. The aim was to learn how the support material affects the thermal stability of barium carbonate and its activity in the reaction to bulk Ba(NO3)2. The lower thermal stability of BaCO3 in alumina supported samples was found to influence the formation of barium nitrate during the NO x storage process. Quantification of Ba(NO3)2 formed during NO x storage indicated that for alumina supported catalysts only ca. 30% of barium present in the sample is involved in the storage process. The low thermal stability found for alumina supported barium nitrite excludes its role in the formation of barium nitrate during interaction of NO x with the catalyst at 300°C. The studies indicate that γ-Al2O3 plays a major role in influencing the thermal stability of BaCO3 and Ba(NO3)2. This finding seems to be relevant for the higher activity of γ-Al2O3-supported catalysts in NO x storage reduction reaction
Towards joint reconstruction of noise and losses in quantum channels
The calibration of a quantum channel, i.e. the determination of the
transmission losses affecting it, is definitely one of the principal objectives
in both the quantum communication and quantum metrology frameworks. Another
task of the utmost relevance is the identification, e.g. by extracting its
photon number distribution, of the noise potentially present in the channel.
Here we present a protocol, based on the response of a photon-number-resolving
detector at different quantum efficiencies, able to accomplish both of these
tasks at once, providing with a single measurement an estimate of the
transmission losses as well as the photon statistics of the noise present in
the exploited quantum channel. We show and discuss the experimental results
obtained in the practical implementation of such protocol, with different kinds
and levels of noise.Comment: 6 pages, 4 figure
Detection and characterization of a 500 μm dust emissivity excess in the Galactic plane using Herschel/Hi-GAL observations
Context. Past and recent observations have revealed unexpected variations in the far-infrared – millimeter (FIR-mm) dust emissivity in the interstellar medium. In the Herschel spectral range, those are often referred to as a 500 μm emission excess. Several dust emission models have been developed to interpret astrophysical data in the FIR-mm domain. However, these are commonly unable to fully reconcile theoretical predictions with observations. In contrast, the recently revised two level system (TLS) model, based on the disordered internal structure of amorphous dust grains, seems to provide a promising way of interpreting existing data.
Aims. The newly available Herschel infrared GALactic (Hi-GAL) data, which covers most of the inner Milky Way, offers a unique opportunity to investigate possible variations in the dust emission properties both with wavelength and environment. The goal of our analysis is to constrain the internal structure of the largest dust grains on Galactic scales, in the framework of the TLS model.
Methods. By combining the IRIS (Improved Reprocessing of the IRAS Survey) 100 μm with the Hi-GAL 160, 250, 350, and 500 μm data, we model the dust emission spectra in each pixel of the Hi-GAL maps, using both the TLS model and, for comparison, a single modified black-body fit. The effect of temperature mixing along the line of sight is investigated to test the robustness of our results.
Results. We find a slight decrease in the dust temperature with distance from the Galactic center, confirming previous results. We also report the detection of a significant 500 μm emissivity excess in the peripheral regions of the plane (35° < |l| < 70°) of about 13–15% of the emissivity, which can reach up to 20% in some HII regions. We present the spatial distributions of the best-fit values for the two main parameters of the TLS model, i.e. the charge correlation length, lc, used to characterize the disordered charge distribution (DCD) part of the model, and the amplitude A of the TLS processes with respect to the DCD effect. These distributions illustrate the variations in the dust properties with environment, in particular the plausible existence of an overall gradient with distance to the Galactic center. A comparison with previous findings in the solar neighborhood shows that the local value of the excess is less than expected from the Galactic gradient observed here
- …