11,674 research outputs found
Faster K-Means Cluster Estimation
There has been considerable work on improving popular clustering algorithm
`K-means' in terms of mean squared error (MSE) and speed, both. However, most
of the k-means variants tend to compute distance of each data point to each
cluster centroid for every iteration. We propose a fast heuristic to overcome
this bottleneck with only marginal increase in MSE. We observe that across all
iterations of K-means, a data point changes its membership only among a small
subset of clusters. Our heuristic predicts such clusters for each data point by
looking at nearby clusters after the first iteration of k-means. We augment
well known variants of k-means with our heuristic to demonstrate effectiveness
of our heuristic. For various synthetic and real-world datasets, our heuristic
achieves speed-up of up-to 3 times when compared to efficient variants of
k-means.Comment: 6 pages, Accepted at ECIR 201
CP asymmetry and branching ratio of B -> pi pi
We investigate the branching ratios and CP asymmetries of the B -> pi pi
processes measured in B factory experiments. Fits to the experimental data of
this process indicate a large ratio of color-suppressed (C) to color-allowed
(T) tree contributions. We investigate whether the large C/T can be explained
within the QCD based model computation with i) a large effect from the
end-point singularity or with ii) large final-state-interaction phase between
two different isospin amplitudes. We show that the current experimental data do
not exclude either possibility but we may be able to distinguish these two
effects in future measurements of direct CP asymmetry of B -> pi^0 pi^0.Comment: 8 pages, 10 figure
Relationship Between Obesity and Periodontal Status in Vietnamese Patients
This study aims to investigate periodontal status, and the relationship between obesity and periodontal status in patients who first visited the Institute of Traditional Medicine, Ho Chi Minh City, Vietnam. 118 patients aged 18 or older, including 56 obese subjects (BMI≥27.5, mean age: 33.8, males: 11, females: 45) and 62 non-obese subjects (BMI<27.5, mean age: 34.3, males: 4, females: 58) were enrolled for a period of 5 months from February 2014 to June 2014. The information on socio-demographic characteristics and dental habits were collected by questionnaire. Periodontal status (PLI, GI, BOP, PD, CAL) was examined and the anthropometric index was measured. There was significantly higher prevalence of periodontitis (39.3%) in the obese group than the non-obese group (16.4%). Means of GI, BOP, PD, and CAL in obese subjects were significantly higher than those in non-obese subjects. Significantly higher percentages of subjects who had lower education, visited dental offices, scaled and polished their teeth regularly were in the non-obese group than in the obese group. Multiple logistic regression analysis revealed that age (OR=3.10), routine of dental visit (OR=3.34) and obesity (OR=2.79) were risk factors significantly related to periodontitis. Periodontal status in obese subjects was poorer than non-obese subjects. Obesity might be the risk factor for periodontitis in Vietnamese patients
Charmless Final State Interaction in B-> pi pi decays
We estimate effects of the final state interactions in B -> pi pi decays
coming from rescattering of pi pi via exchange of rho, sigma, f_0 mesons. Then
we include the rho rho rescattering via exchange of pi, omega, a_1 mesons and
finally we consider contributions of the a_1 pi rescattering via exchange of
rho. The absorptive parts of amplitudes for these processes are determined. In
the case of pi^+ pi^- decay mode, due to model uncertainties, the calculated
contribution is |M_A| =< 1.7 x 10^-8 GeV. This produces a small relative strong
phase for the tree and color-suppressed B -> pi pi amplitudes consistent with
the result of a recent phenomenological analysis based on the BaBar and Belle
results for the B -> pi pi branching ratios and CP asymmetries.Comment: 10 pages, 2 figure
Hydrogen-oxygen proton-exchange membrane fuel cells and electrolyzers
Hydrogen-oxygen solid polymer electrolyte (SPE) fuel cells and SPE electrolyzers (products of Hamilton Standard) both use a Proton-Exchange Membrane (PEM) as the sole electrolyte. These solid electrolyte devices have been under continuous development for over 30 years. This experience has resulted in a demonstrated ten-year SPE cell life capability under load conditions. Ultimate life of PEM fuel cells and electrolyzers is primarily related to the chemical stability of the membrane. For perfluorocarbon proton exchange membranes an accurate measure of the membrane stability is the fluoride loss rate. Millions of cell hours have contributed to establishing a relationship between fluoride loss rates and average expected ultimate cell life. This relationship is shown. Several features have been introduced into SPE fuel cells and SPE electrolyzers such that applications requiring greater than or equal to 100,000 hours of life can be considered. Equally important as the ultimate life is the voltage stability of hydrogen-oxygen fuel cells and electrolyzers. Here again the features of SPE fuel cells and SPE electrolyzers have shown a cell voltage stability in the order of 1 microvolt per hour. That level of stability has been demonstrated for tens of thousands of hours in SPE fuel cells at up to 500 amps per square foot (ASF) current density
Hydrogen-oxygen proton-exchange membrane fuel cells and electrolyzers
Hydrogen-oxygen SPE fuel cells and SPE electrolyzers (products of Hamilton Standard) both use a Proton-Exchange Membrane (PEM) as the sole electrolyte. The SPE cells have demonstrated a ten year life capability under load conditions. Ultimate life of PEM fuel cells and electrolyzers is primarily related to the chemical stability of the membrane. For perfluorocarbon proton-exchange membranes an accurate measure of the membrane stability is the fluoride loss rate. Millions of cell hours have contributed to establishing a relationship between fluroride loss rates and average expected ultimate cell life. Several features were introduced into SPE fuel cells and SPE electrolyzers such that applications requiring greater than or equal to 100,000 hours of life can be considered. Equally important as the ultimate life is the voltage stability of hydrogen-oxygen fuel cells and electrolyzers. Here again the features of SPE fuel cells and SPE electrolyzers have shown a cell voltage stability in the order of 1 microvolt per hour. That level of stability were demonstrated for tens of thousands of hours in SPE fuel cells at up to 500 amps per square foot (ASF) current density. The SPE electrolyzers have demonstrated the same at 1000 ASF. Many future extraterrestrial applications for fuel cells require that they be self recharged. To translate the proven SPE cell life and stability into a highly reliable extraterrestrial electrical energy storage system, a simplification of supporting equipment is required. Static phase separation, static fluid transport and static thermal control will be most useful in producting required system reliability. Although some 200,000 SPE fuel cell hours were recorded in earth orbit with static fluid phase separation, no SPE electrolyzer has, as yet, operated in space
Optimized FRP Wrapping Schemes for Circular Concrete Columns under Axial Compression
This study investigates the behavior and failure modes of fiber-reinforced polymer (FRP) confined concrete wrapped with different FRP schemes, including fully wrapped, partially wrapped, and nonuniformly-wrapped concrete cylinders. By using the same amount of FRP, this study proposes a new wrapping scheme that provides a higher compressive strength and strain for FRP-confined concrete, in comparison with conventional fully wrapping schemes. A total of 33 specimens were cast and tested, with three of these specimens acting as reference specimens and the remaining specimens wrapped with different types of FRP (CFRP and GFRP) by different wrapping schemes. For specimens that belong to the descending branch type, the partially-wrapped specimens had a lower compressive strength but a higher axial strain as compared to the corresponding fully-wrapped specimens. In addition, the nonuniformly-wrapped specimens achieved both a higher compressive strength and axial strain in comparison with the fully-wrapped specimens. Furthermore, the partially-wrapping scheme changes the failure modes of the specimens and the angle of the failure surface. A new equation that can be used to predict the axial strain of concrete cylinders wrapped partially with FRP is proposed
Spinodal nanodecomposition in magnetically doped semiconductors
This review presents the recent progress in computational materials design,
experimental realization, and control methods of spinodal nanodecomposition
under three- and two-dimensional crystal-growth conditions in spintronic
materials, such as magnetically doped semiconductors. The computational
description of nanodecomposition, performed by combining first-principles
calculations with kinetic Monte Carlo simulations, is discussed together with
extensive electron microscopy, synchrotron radiation, scanning probe, and ion
beam methods that have been employed to visualize binodal and spinodal
nanodecomposition (chemical phase separation) as well as nanoprecipitation
(crystallographic phase separation) in a range of semiconductor compounds with
a concentration of transition metal (TM) impurities beyond the solubility
limit. The role of growth conditions, co-doping by shallow impurities, kinetic
barriers, and surface reactions in controlling the aggregation of magnetic
cations is highlighted. According to theoretical simulations and experimental
results the TM-rich regions appear either in the form of nanodots (the {\em
dairiseki} phase) or nanocolumns (the {\em konbu} phase) buried in the host
semiconductor. Particular attention is paid to Mn-doped group III arsenides and
antimonides, TM-doped group III nitrides, Mn- and Fe-doped Ge, and Cr-doped
group II chalcogenides, in which ferromagnetic features persisting up to above
room temperature correlate with the presence of nanodecomposition and account
for the application-relevant magneto-optical and magnetotransport properties of
these compounds. Finally, it is pointed out that spinodal nanodecomposition can
be viewed as a new class of bottom-up approach to nanofabrication.Comment: 72 pages, 79 figure
- …