Multi-Axis Identifiability Using Single-Surface Parameter Estimation Maneuvers on the X-48B Blended Wing Body

The problem of parameter estimation on hybrid-wing-body type aircraft is complicated by the fact that many design candidates for such aircraft involve a large number of aero- dynamic control effectors that act in coplanar motion. This fact adds to the complexity already present in the parameter estimation problem for any aircraft with a closed-loop control system. Decorrelation of system inputs must be performed in order to ascertain individual surface derivatives with any sort of mathematical confidence. Non-standard control surface configurations, such as clamshell surfaces and drag-rudder modes, further complicate the modeling task. In this paper, asymmetric, single-surface maneuvers are used to excite multiple axes of aircraft motion simultaneously. Time history reconstructions of the moment coefficients computed by the solved regression models are then compared to each other in order to assess relative model accuracy. The reduced flight-test time required for inner surface parameter estimation using multi-axis methods was found to come at the cost of slightly reduced accuracy and statistical confidence for linear regression methods. Since the multi-axis maneuvers captured parameter estimates similar to both longitudinal and lateral-directional maneuvers combined, the number of test points required for the inner, aileron-like surfaces could in theory have been reduced by 50%. While trends were similar, however, individual parameters as estimated by a multi-axis model were typically different by an average absolute difference of roughly 15-20%, with decreased statistical significance, than those estimated by a single-axis model. The multi-axis model exhibited an increase in overall fit error of roughly 1-5% for the linear regression estimates with respect to the single-axis model, when applied to flight data designed for each, respectively

A 1987 progress report of manufacturing techniques for Gravity Probe B gyroscope rotors

The significant improvements in the manufacture of Gravity Probe B gyroscope rotors developed since the publication of the last report on this project are presented. The improvements include the polishing machine structure, rough laps, finishing/polishing laps, lapping procedure, measurement techniques, and a summary of the manufacturing status. These six areas represent significant improvements in the manufacture of the gyroscope rotors to meet flight requirements

A comparison of the two approaches of the theory of critical distances based on linear-elastic and elasto-plastic analyses

The problem of determining the strength of engineering structures, considering the effects of the non-local fracture in the area of stress concentrators is a great scientific and industrial interest. This work is aimed on modification of the classical theory of critical distance that is known as a method of failure prediction based on linear-elastic analysis in case of elasto-plastic material behaviour to improve the accuracy of estimation of lifetime of notched components. Accounting plasticity has been implemented with the use of the Simplified Johnson-Cook model. Mechanical tests were carried out using a 300 kN electromechanical testing machine Shimadzu AG-X Plus. The cylindrical un-notched specimens and specimens with stress concentrators of titanium alloy Grade2 were tested under tensile loading with different grippers travel speed, which ensured several orders of strain rate. The results of elasto-plastic analyses of stress distributions near a wide variety of notches are presented. The results showed that the use of the modification of the TCD based on elasto-plastic analysis gives us estimates falling within an error interval of ±5-10%, that more accurate predictions than the linear elastic TCD solution. The use of an improved description of the stress-strain state at the notch tip allows introducing the critical distances as a material parameter

Nonlinearity-induced conformational instability and dynamics of biopolymers

We propose a simple phenomenological model for describing the conformational dynamics of biopolymers via the nonlinearity-induced buckling and collapse (i.e. coiling up) instabilities. Taking into account the coupling between the internal and mechanical degrees of freedom of a semiflexible biopolymer chain, we show that self-trapped internal excitations (such as amide-I vibrations in proteins, base-pair vibrations in DNA, or polarons in proteins) may produce the buckling and collapse instabilities of an initially straight chain. These instabilities remain latent in a straight infinitely long chain, because the bending of such a chain would require an infinite energy. However, they manifest themselves as soon as we consider more realistic cases and take into account a finite length of the chain. In this case the nonlinear localized modes may act as drivers giving impetus to the conformational dynamics of biopolymers. The buckling instability is responsible, in particular, for the large-amplitude localized bending waves which accompany the nonlinear modes propagating along the chain. In the case of the collapse instability, the chain folds into a compact three-dimensional coil. The viscous damping of the aqueous environment only slows down the folding of the chain, but does not stop it even for a large damping. We find that these effects are only weakly affected by the peculiarities of the interaction potentials, and thus they should be generic for different models of semiflexible chains carrying nonlinear localized excitations.Comment: 4 pages (RevTeX) with 5 figures (EPS

Fatally Flawed? : Discursive Evidence from the Movement to Establish Lesbian Studies Programs

While related areas such as Queer Studies and Sexuality Studies have become established as disciplinary formations in North American and British universities, Lesbian Studies has not. This article reports on an analysis of key publications by critics and advocates of Lesbian Studies to explore the possibility that Lesbian Studies was flawed in ways that account for its non-emergence. Charges against Lesbian Studies include naïve essentialism, white middle-classness, separatism, and paranoia. Discourse analysis of books by Lesbian Studies advocates examines evidence of each of these qualities and concludes that Lesbian Studies was above all too lesbian to be successfully integrated into the enduringly heteropatriarchal institution of universities.University of Winnipeghttp://journals.sagepub.com/doi/10.1177/095935351037018

Images of the Dark Soliton in a Depleted Condensate

The dark soliton created in a Bose-Einstein condensate becomes grey in course of time evolution because its notch fills up with depleted atoms. This is the result of quantum mechanical calculations which describes output of many experimental repetitions of creation of the stationary soliton, and its time evolution terminated by a destructive density measurement. However, such a description is not suitable to predict the outcome of a single realization of the experiment were two extreme scenarios and many combinations thereof are possible: one will see (1) a displaced dark soliton without any atoms in the notch, but with a randomly displaced position, or (2) a grey soliton with a fixed position, but a random number of atoms filling its notch. In either case the average over many realizations will reproduce the mentioned quantum mechanical result. In this paper we use N-particle wavefunctions, which follow from the number-conserving Bogoliubov theory, to settle this issue.Comment: 8 pages, 6 figures, references added in version accepted for publication in J. Phys.

Influence of the initial chemical conditions on the rational design of silica particles

The influence of the water content in the initial composition on the size of silica particles produced using the Stöber process is well known. We have shown that there are three morphological regimes defined by compositional boundaries. At low water levels (below stoichiometric ratio of water:tetraethoxysilane), very high surface area and aggregated structures are formed; at high water content (>40 wt%) similar structures are also seen. Between these two boundary conditions, discrete particles are formed whose size are dictated by the water content. Within the compositional regime that enables the classical Stöber silica, the structural evolution shows a more rapid attainment of final particle size than the rate of formation of silica supporting the monomer addition hypothesis. The clearer understanding of the role of the initial composition on the output of this synthesis method will be of considerable use for the establishment of reliable reproducible silica production for future industrial adoption

Lower cardiorespiratory fitness contributes to increased insulin resistance and fasting glycaemia in middle-aged South Asian compared with European men living in the UK

AIMS/HYPOTHESIS: This study aimed to determine the extent to which increased insulin resistance and fasting glycaemia in South Asian men, compared with white European men, living in the UK, was due to lower cardiorespiratory fitness (maximal oxygen uptake [[Formula: see text]]) and physical activity. METHODS: One hundred South Asian and 100 age- and BMI-matched European men without diagnosed diabetes, aged 40–70 years, had fasted blood taken for measurement of glucose concentration, HOMA-estimated insulin resistance (HOMA(IR)), plus other risk factors, and underwent assessment of physical activity (using accelerometry), [Formula: see text], body size and composition, and demographic and other lifestyle factors. For 13 South Asian and one European man, HbA(1c) levels were >6.5% (>48 mmol/mol), indicating potential undiagnosed diabetes; these men were excluded from the analyses. Linear regression models were used to determine the extent to which body size and composition, fitness and physical activity variables explained differences in HOMA(IR) and fasting glucose between South Asian and European men. RESULTS: HOMA(IR) and fasting glucose were 67% (p < 0.001) and 3% (p < 0.018) higher, respectively, in South Asians than Europeans. Lower [Formula: see text], lower physical activity and greater total adiposity in South Asians individually explained 68% (95% CI 45%, 91%), 29% (11%, 46%) and 52% (30%, 80%), respectively, and together explained 83% (50%, 119%) (all p < 0.001) of the ethnic difference in HOMA(IR). Lower [Formula: see text] and greater total adiposity, respectively, explained 61% (9%, 111%) and 39% (9%, 76%) (combined effect 63% [8%, 115%]; all p < 0.05) of the ethnic difference in fasting glucose. CONCLUSIONS/INTERPRETATION: Lower cardiorespiratory fitness is a key factor associated with the excess insulin resistance and fasting glycaemia in middle-aged South Asian, compared with European, men living in the UK. ELECTRONIC SUPPLEMENTARY MATERIAL: The online version of this article (doi:10.1007/s00125-013-2969-y) contains peer-reviewed but unedited supplementary material, which is available to authorised users