A case of pulmonary aspergillosis in white storks

ΔΕΝ ΔΙΑΤΙΘΕΤΑΙ ΠΕΡΙΛΗΨΗAspergillosis is a fungal infection affecting respiratory system both in mammals and avian species. It is more commonly encountered in birds, in comparison with its mammalian counterpart. Mostly isolated strains are Aspergillus fumigatus (95%) and Aspergillus flavus (5%). Affected lungs and air sacs reveal miliary to gross lesions like gray-yellowish or white-grayish granulomatous foci surrounded by white halos indicative of inflammatory infiltration. Five storks found dead in the rural areas near Istanbul were submitted to our faculty between years 2008 and 2014. Two of them were thought to be younger than 1-year-old and the other three were older than one year of age. Necropsies were performed right after their submissions. Aspergillosis lesions were observed in the lungs and thoracic air sacs of the first four storks. In addition to these changes the lesions were detected at the aortic bifurcation and on the testicular and renal capsule of the fifth stork. Histopathology revealed encapsulated granulomas with foci of caseous necrosis at the center surrounded by numerous macrophages, heterophil leukocytes, lymphocytes and foreign body giant cells in all the storks. Following the gross, histopathological and mycological examinations the agents were detected as Aspergillus fumigatus. Although, the number of reported deaths due to Aspergillosis is not high in storks, we believe that these birds are quite susceptible to the disease and stress factors such as migration increases the risk of pathogenicity. This report was designed as a contribution to literature since there is only one reported case available with respect to aspergillosis associated death in storks and stress factors such as migration may also predispose storks to the disease

Recent advances in chemistry, therapeutic properties and sources of polydatin

Joint review by Hacettepe University, Faculty of Pharmacy, Department of Pharmacognosy and De Montfort University, Leicester School of Pharmacy.Polydatin (PLD), the 3-O-β-glucopyranoside of the well-known stilbenoid compound resveratrol, is a major compound of Fallopia japonica (Houtt.) R. Decr. (Japanese knotweed), which is widely used in traditional Chinese medicine to treat infection, inflammatory diseases and circulatory problems. It has shown a wide range of biological activities including anti-inflammatory, anti-oxidant, anti-cancer, neuroprotective, hepatoprotective, nephroprotective and immunostimulatory effects. Although resveratrol has similar beneficial effects, its low bioavailability has remained a problem. Glycosylation increases solubility of resveratrol in an aqueous environment, thus improving its bioavailability. This has led to a growing interest in PLD. Promising results obtained from bioactivity studies have boosted an intense research on this compound. The aim of this review is to give a comprehensive overview of the botanical sources, pharmacology, biosynthesis, biotechnological production, and bioactivities of PLD, and to discuss clinical studies on this compound

The complete digital workflow in fixed prosthodontics: a systematic review

Background The continuous development in dental processing ensures new opportunities in the field of fixed prosthodontics in a complete virtual environment without any physical model situations. The aim was to compare fully digitalized workflows to conventional and/or mixed analog-digital workflows for the treatment with tooth-borne or implant-supported fixed reconstructions. Methods A PICO strategy was executed using an electronic (MEDLINE, EMBASE, Google Scholar) plus manual search up to 2016–09-16 focusing on RCTs investigating complete digital workflows in fixed prosthodontics with regard to economics or esthetics or patient-centered outcomes with or without follow-up or survival/success rate analysis as well as complication assessment of at least 1 year under function. The search strategy was assembled from MeSH-Terms and unspecific free-text words: {((“Dental Prosthesis” [MeSH]) OR (“Crowns” [MeSH]) OR (“Dental Prosthesis, Implant-Supported” [MeSH])) OR ((crown) OR (fixed dental prosthesis) OR (fixed reconstruction) OR (dental bridge) OR (implant crown) OR (implant prosthesis) OR (implant restoration) OR (implant reconstruction))} AND {(“Computer-Aided Design” [MeSH]) OR ((digital workflow) OR (digital technology) OR (computerized dentistry) OR (intraoral scan) OR (digital impression) OR (scanbody) OR (virtual design) OR (digital design) OR (cad/cam) OR (rapid prototyping) OR (monolithic) OR (full-contour))} AND {(“Dental Technology” [MeSH) OR ((conventional workflow) OR (lost-wax-technique) OR (porcelain-fused-to-metal) OR (PFM) OR (implant impression) OR (hand-layering) OR (veneering) OR (framework))} AND {((“Study, Feasibility” [MeSH]) OR (“Survival” [MeSH]) OR (“Success” [MeSH]) OR (“Economics” [MeSH]) OR (“Costs, Cost Analysis” [MeSH]) OR (“Esthetics, Dental” [MeSH]) OR (“Patient Satisfaction” [MeSH])) OR ((feasibility) OR (efficiency) OR (patient-centered outcome))}. Assessment of risk of bias in selected studies was done at a ‘trial level’ including random sequence generation, allocation concealment, blinding, completeness of outcome data, selective reporting, and other bias using the Cochrane Collaboration tool. A judgment of risk of bias was assigned if one or more key domains had a high or unclear risk of bias. An official registration of the systematic review was not performed. Results The systematic search identified 67 titles, 32 abstracts thereof were screened, and subsequently, three full-texts included for data extraction. Analysed RCTs were heterogeneous without follow-up. One study demonstrated that fully digitally produced dental crowns revealed the feasibility of the process itself; however, the marginal precision was lower for lithium disilicate (LS2) restorations (113.8 μm) compared to conventional metal-ceramic (92.4 μm) and zirconium dioxide (ZrO2) crowns (68.5 μm) (p < 0.05). Another study showed that leucite-reinforced glass ceramic crowns were esthetically favoured by the patients (8/2 crowns) and clinicians (7/3 crowns) (p < 0.05). The third study investigated implant crowns. The complete digital workflow was more than twofold faster (75.3 min) in comparison to the mixed analog-digital workflow (156.6 min) (p < 0.05). No RCTs could be found investigating multi-unit fixed dental prostheses (FDP). Conclusions The number of RCTs testing complete digital workflows in fixed prosthodontics is low. Scientifically proven recommendations for clinical routine cannot be given at this time. Research with high-quality trials seems to be slower than the industrial progress of available digital applications. Future research with well-designed RCTs including follow-up observation is compellingly necessary in the field of complete digital processing

Comparison of digital and conventional impression techniques: evaluation of patients’ perception, treatment comfort, effectiveness and clinical outcomes

Background: The purpose of this study was to compare two impression techniques from the perspective of patient preferences and treatment comfort.Methods: Twenty-four (12 male, 12 female) subjects who had no previous experience with either conventional or digital impression participated in this study. Conventional impressions of maxillary and mandibular dental arches were taken with a polyether impression material (Impregum, 3 M ESPE), and bite registrations were made with polysiloxane bite registration material (Futar D, Kettenbach). Two weeks later, digital impressions and bite scans were performed using an intra-oral scanner (CEREC Omnicam, Sirona). Immediately after the impressions were made, the subjects' attitudes, preferences and perceptions towards impression techniques were evaluated using a standardized questionnaire. The perceived source of stress was evaluated using the State-Trait Anxiety Scale. Processing steps of the impression techniques (tray selection, working time etc.) were recorded in seconds. Statistical analyses were performed with the Wilcoxon Rank test, and p < 0.05 was considered significant.Results: There were significant differences among the groups (p < 0.05) in terms of total working time and processing steps. Patients stated that digital impressions were more comfortable than conventional techniques.Conclusions: Digital impressions resulted in a more time-efficient technique than conventional impressions. Patients preferred the digital impression technique rather than conventional techniques

Identification of valid housekeeping genes for quantitative RT-PCR analysis of cardiosphere-derived cells preconditioned under hypoxia or with prolyl-4-hydroxylase inhibitors

Infarction irreversibly damages the heart, with formation of an akinetic scar that may lead to heart failure. Endogenous cardiac stem cells (CSCs) are a promising candidate cell source for restoring lost tissue and thereby preventing heart failure. CSCs may be isolated in vitro, via the formation of cardiospheres, to give cardiosphere-derived cells (CDCs). Although qRT-PCR analyses of CDCs have been performed, no justification for the selection of the housekeeping gene has been published. Here, we evaluated the most suitable housekeeping gene for RNA expression analysis in CDCs cultured under normoxia, hypoxia or with prolyl-4-hydroxylase inhibitors (PHDIs), from both neonatal and adult rats, to determine the effects of ageing and different culture conditions on the stability of the housekeeping gene for CDCs. Six candidate housekeeping genes, [glyceraldehyde-3-phosphate dehydrogenase (GAPDH), beta-actin (Actb), hypoxanthine phosphoribosyltransferase 1 (HPRT-1), beta-2-microtubulin (β2M), 60S acidic ribosomal protein large P1 (RPLP-1) and TATA box binding protein (Tbp)] were evaluated in this study. Analysis using geNorm and NormFinder revealed that GAPDH was the most constant housekeeping gene among all genes tested under normoxia for both neonatal and adult CDCs, whereas Actb was the most stable housekeeping gene under hypoxia. For the PHDI-treated CDCs, overall, GADPH, Actb and β2M were more consistently expressed, whereas HPRT-1, RPLP-1 and Tbp showed unstable expression. The ranking for β2M, HPRT-1 and RPLP-1 stability was different for neonatal and adult cells, indicating that expression of these genes was age-dependent. Lastly, independent of age or culture conditions, Tbp was the least stable housekeeping gene. In conclusion, a combination of Actb and GADPH gave the most reliable normalization for comparative analyses of gene transcription in neonatal and adult rat CDCs preconditioned by hypoxia or PHDIs

Trueness of CAD/CAM digitization with a desktop scanner – an in vitro study

Desktop scanners are devices for digitization of conventional impressions or gypsum casts by indirect Computer-Aided Design/Computer-Assisted Manufacturing (CAD/CAM) in dentistry. The purpose of this in vitro study was: 1, to investigate whether virtual models produced by the extraoral scanner have the same trueness as sectioned casts; and 2, to assess if digitization with an extraoral scanner influences the surface information

Preparation and monitoring of small animals in renal MRI

Renal diseases remain devastating illnesses with unacceptably high rates of mortality and morbidity worldwide. Animal models are essential tools to better understand the pathomechanism of kidney-related illnesses and to develop new, successful therapeutic strategies. Magnetic resonance imaging (MRI) has been actively explored in the last decades for assessing renal function, perfusion, tissue oxygenation as well as the degree of fibrosis and inflammation. This chapter aims to provide an overview of the preparation and monitoring of small animals before, during, and after surgical interventions or MR imaging. Standardization of experimental settings such as body temperature or hydration of animals and minimizing pain and distress are essential for diminishing nonexperimental variables as well as for conducting ethical research.This publication is based upon work from the COST Action PARENCHIMA, a community-driven network funded by the European Cooperation in Science and Technology (COST) program of the European Union, which aims to improve the reproducibility and standardization of renal MRI biomarkers

Berteroa physocarpa (Brassicaceae), a new species from NW Turkey based on morphological and molecular data

Berteroa physocarpa, a new species from the subalpine-alpine zone (1600-2200 m) of northwest Anatolia, is described and illustrated. It shares with the other species of Berteroa 2n= 16 and morphologically is readily distinguished from them by having distinctly inflated fruit with glabrous valves. Sequences of nuclear ribosomal transcribed spacer (ITS) region were used to determine the relationship of Berteroa species using maximum likelihood methods. The phylogenetic results confirmed the recently established systematic history of Berteroa and also supported the recognition of this new species