Multi-patch model for transport properties of cuprate superconductors

A number of normal state transport properties of cuprate superconductors are analyzed in detail using the Boltzmann equation. The momentum dependence of the electronic structure and the strong momentum anisotropy of the electronic scattering are included in a phenomenological way via a multi-patch model. The Brillouin zone and the Fermi surface are divided in regions where scattering between the electrons is strong and the Fermi velocity is low (hot patches) and in regions where the scattering is weak and the Fermi velocity is large (cold patches). We present several motivations for this phenomenology starting from various microscopic approaches. A solution of the Boltzmann equation in the case of N patches is obtained and an expression for the distribution function away from equilibrium is given. Within this framework, and limiting our analysis to the two patches case, the temperature dependence of resistivity, thermoelectric power, Hall angle, magnetoresistance and thermal Hall conductivity are studied in a systematic way analyzing the role of the patch geometry and the temperature dependence of the scattering rates. In the case of Bi-based cuprates, using ARPES data for the electronic structure, and assuming an inter-patch scattering between hot and cold states with a linear temperature dependence, a reasonable agreement with the available experiments is obtained.Comment: 18 pages, 18 figures, to be published on Eur. Phys. J.

Frequency-dependent transport through a quantum dot in the Kondo regime

We study the AC conductance and equilibrium current fluctuations of a Coulomb blockaded quantum dot. A relation between the equilibrium spectral function and the linear AC conductance is derived which is valid for frequencies well below the charging energy of the quantum dot. Frequency-dependent transport measurements can thus give experimental access to the Kondo peak in the equilibrium spectral function of a quantum dot. We illustrate this in detail for typical experimental parameters using the numerical renormalization group method in combination with the Kubo formalism.Comment: 4 pages, 4 figure

Brittleness index of machinable dental materials and its relation to the marginal chipping factor

OBJECTIVES: The machinability of a material can be measured with the calculation of its brittleness index (BI). It is possible that different materials with different BI could produce restorations with varied marginal integrity. The degree of marginal chipping of a milled restoration can be estimated by the calculation of the marginal chipping factor (CF). The aim of this study is to investigate any possible correlation between the BI of machinable dental materials and the CF of the final restorations. METHODS: The CERECTM system was used to mill a wide range of materials used with that system; namely the Paradigm MZ100TM (3M/ESPE), Vita Mark II (VITA), ProCAD (Ivoclar-Vivadent) and IPS e.max CAD (Ivoclar-Vivadent). A Vickers hardness Tester was used for the calculation of BI, while for the calculation of CF the percentage of marginal chipping of crowns prepared with bevelled marginal angulations was estimated. RESULTS: The results of this study showed that Paradigm MZ100 had the lowest BI and CF, while IPS e.max CAD demonstrated the highest BI and CF. Vita Mark II and ProCAD had similar BI and CF and were lying between the above materials. Statistical analysis of the results showed that there is a perfect positive correlation between BI and CF for all the materials. CONCLUSIONS: The BI and CF could be both regarded as indicators of a material’s machinability. Within the limitations of this study it was shown that as the BI increases so does the potential for marginal chipping, indicating that the BI of a material can be used as a predictor of the CF

Preventing weed spread: a survey of lifestyle and commercial landholders about Nassella trichotoma in the Northern Tablelands of New South Wales, Australia

Nassella trichotoma (Nees) Hack. ex Arechav. (common name, serrated tussock) occupies large areas of south-eastern Australia and has considerable scope for expansion in the Northern Tablelands of New South Wales. This highly invasive grass reduces pasture productivity and has the potential to severely affect the region’s economy by decreasing the livestock carrying capacity of grazing land. Other potential consequences of this invasion include increased fuel loads and displacement of native plants, thereby threatening biodiversity. Rural property owners in the Northern Tablelands were sent a mail questionnaire that examined use of measures to prevent new outbreaks of the weed. The questionnaire was sent to professional farmers as well as lifestyle farmers (owners of rural residential blocks and hobby farms) and 271 responses were obtained (a response rate of 18%). Key findings were respondents’ limited capacity to detect N. trichotoma, and low adoption of precautions to control seed spread by livestock, vehicles and machinery. This was particularly the case among lifestyle farmers. There have been considerable recent changes to biosecurity governance arrangements in New South Wales, and now is an ideal time for regulators and information providers to consider how to foster regional communities’ engagement in biosecurity, including the adoption of measures that have the capacity to curtail the spread of N. trichotoma

Kondo quantum dot coupled to ferromagnetic leads: Numerical renormalization group study

We systematically study the influence of ferromagnetic leads on the Kondo resonance in a quantum dot tuned to the local moment regime. We employ Wilson's numerical renormalization group method, extended to handle leads with a spin asymmetric density of states, to identify the effects of (i) a finite spin polarization in the leads (at the Fermi-surface), (ii) a Stoner splitting in the bands (governed by the band edges) and (iii) an arbitrary shape of the leads density of states. For a generic lead density of states the quantum dot favors being occupied by a particular spin-species due to exchange interaction with ferromagnetic leads leading to a suppression and splitting of the Kondo resonance. The application of a magnetic field can compensate this asymmetry restoring the Kondo effect. We study both the gate-voltage dependence (for a fixed band structure in the leads) and the spin polarization dependence (for fixed gate voltage) of this compensation field for various types of bands. Interestingly, we find that the full recovery of the Kondo resonance of a quantum dot in presence of leads with an energy dependent density of states is not only possible by an appropriately tuned external magnetic field but also via an appropriately tuned gate voltage. For flat bands simple formulas for the splitting of the local level as a function of the spin polarization and gate voltage are given.Comment: 18 pages, 18 figures, accepted for publication in PR

Spintronic magnetic anisotropy

An attractive feature of magnetic adatoms and molecules for nanoscale applications is their superparamagnetism, the preferred alignment of their spin along an easy axis preventing undesired spin reversal. The underlying magnetic anisotropy barrier --a quadrupolar energy splitting-- is internally generated by spin-orbit interaction and can nowadays be probed by electronic transport. Here we predict that in a much broader class of quantum-dot systems with spin larger than one-half, superparamagnetism may arise without spin-orbit interaction: by attaching ferromagnets a spintronic exchange field of quadrupolar nature is generated locally. It can be observed in conductance measurements and surprisingly leads to enhanced spin filtering even in a state with zero average spin. Analogously to the spintronic dipolar exchange field, responsible for a local spin torque, the effect is susceptible to electric control and increases with tunnel coupling as well as with spin polarization.Comment: 6 pages with 4 figures + 26 pages of Supplementary Informatio

Electric-field controlled spin reversal in a quantum dot with ferromagnetic contacts

Manipulation of the spin-states of a quantum dot by purely electrical means is a highly desirable property of fundamental importance for the development of spintronic devices such as spin-filters, spin-transistors and single-spin memory as well as for solid-state qubits. An electrically gated quantum dot in the Coulomb blockade regime can be tuned to hold a single unpaired spin-1/2, which is routinely spin-polarized by an applied magnetic field. Using ferromagnetic electrodes, however, the properties of the quantum dot become directly spin-dependent and it has been demonstrated that the ferromagnetic electrodes induce a local exchange-field which polarizes the localized spin in the absence of any external fields. Here we report on the experimental realization of this tunneling-induced spin-splitting in a carbon nanotube quantum dot coupled to ferromagnetic nickel-electrodes. We study the intermediate coupling regime in which single-electron states remain well defined, but with sufficiently good tunnel-contacts to give rise to a sizable exchange-field. Since charge transport in this regime is dominated by the Kondo-effect, we can utilize this sharp many-body resonance to read off the local spin-polarization from the measured bias-spectroscopy. We show that the exchange-field can be compensated by an external magnetic field, thus restoring a zero-bias Kondo-resonance, and we demonstrate that the exchange-field itself, and hence the local spin-polarization, can be tuned and reversed merely by tuning the gate-voltage. This demonstrates a very direct electrical control over the spin-state of a quantum dot which, in contrast to an applied magnetic field, allows for rapid spin-reversal with a very localized addressing.Comment: 19 pages, 11 figure

NRG study of the Kondo effect in the presence of itinerant-electron ferromagnetism

The Kondo effect in quantum dots (QDs) - artificial magnetic impurities - attached to ferromagnetic leads is studied with the numerical renormalization group (NRG) method. It is shown that the QD level is spin-split due to presence of ferromagnetic electrodes, leading to a suppression of the Kondo effect. We find that the Kondo effect can be restored by compensating this splitting with a magnetic field. Although the resulting Kondo resonance then has an unusual spin asymmetry with a reduced Kondo temperature, the ground state is still a locally-screened state, describable by Fermi liquid theory and a generalized Friedel sum rule, and transport in the unitary limit is not spin dependent.Comment: 4 pages, 4 figure

Residual Kondo effect in quantum dot coupled to half-metallic ferromagnets

We study the Kondo effect in a quantum dot coupled to half-metallic ferromagnetic electrodes in the regime of strong on-dot correlations. Using the equation of motion technique for nonequilibrium Green functions in the slave boson representation we show that the Kondo effect is not completely suppressed for anti-parallel leads magnetization. In the parallel configuration there is no Kondo effect but there is an effect associated with elastic cotunneling which in turn leads to similar behavior of the local (on-dot) density of states (LDOS) as the usual Kondo effect. Namely, the LDOS shows the temperature dependent resonance at the Fermi energy which splits with the bias voltage and the magnetic field. Moreover, unlike for non-magnetic or not fully polarized ferromagnetic leads the only minority spin electrons can form such resonance in the density of states. However, this resonance cannot be observed directly in the transport measurements and we give some clues how to identify the effect in such systems.Comment: 15 pages, 8 figures, accepted for publication in J. Phys.: Condens. Mat

Osmotic adjustment, stomata morphology and function show contrasting responses to water stress in mesic and hydric grasses under elevated CO2 concentration

The physiological response of two species of grasses with C3 and C4 mechanisms syndromes, Napier grass (Pennisetum purpureum Schumach × Pennisetum glaucum (L.) R. Br) and hydric common reed grass (Phragmites australis (Cav.) Trin. Ex Steud) was examined under ambient (aCO2) and elevated CO2 (eCO2), in combination with water and temperature stress treatments. Under eCO2 and subjected to water and temperature stress, the Napier grass maintained higher daytime leaf water potential (LWP) by reducing transpiration (E) and executing larger osmotic adjustment (OA) at an average of 0.85 MPa compared with 0.42 MPa for common reed; carbon assimilation (PN) was thus higher for the Napier grass. Under aCO2 and low temperature, water stress induced no significant differences in OA between the grasses, but Napier grass still had higher PN than that of common reed. Recovery in LWP and PN following re-watering of water-stressed plants was more rapid in Napier grass than that in the common reed; the former had also higher water-use efficiency due to its low specific water use (water use/leaf area) that was just a fraction (less than 6%) that of the common reed. Exposure of common reed to eCO2 reduced stomata number, but increased it in the Napier grass, especially when subjected to water stress and high temperature. Exposure to eCO2 enhanced OA capacity and E control in Napier grass resulting in superior physiological profile over the common reed subjected to water and heat stress