263 research outputs found
Battery state of health estimation with improved generalization using parallel layer extreme learning machine
The online estimation of battery state of health (SOH) is crucial to ensure the reliability of the energy supply in electric and hybrid vehicles. An approach for enhancing the generalization of SOH estimation using a parallel layer extreme learning machine (PL-ELM) algorithm is analyzed in this paper. The deterministic and stable PL-ELM model is designed to overcome the drift problem that is associated with some conventional machine learning algorithms; hence, extending the application of a single SOH estimation model over a large set of batteries of the same type. The PL-ELM model was trained with selected features that characterize the SOH. These features are acquired as the discrete variation of indicator variables including voltage, state of charge (SOC), and energy releasable by the battery. The model training was performed with an experimental battery dataset collected at room temperature under a constant current load condition at discharge phases. Model validation was performed with a dataset of other batteries of the same type that were aged under a constant load condition. An optimum performance with low error variance was obtained from the model result. The root mean square error (RMSE) of the validated model varies from 0.064% to 0.473%, and the mean absolute error (MAE) error from 0.034% to 0.355% for the battery sets tested. On the basis of performance, the model was compared with a deterministic extreme learning machine (ELM) and an incremental capacity analysis (ICA)-based scheme from the literature. The algorithm was tested on a Texas F28379D microcontroller unit (MCU) board with an average execution speed of 93 Āµs in real time, and 0.9305% CPU occupation. These results suggest that the model is suitable for online applications
State of Health Estimation of LithiumāIon Batteries in Electric Vehicles under Dynamic Load Conditions
Among numerous functions performed by the battery management system (BMS), online estimation of the state of health (SOH) is an essential and challenging task to be accomplished periodically. In electric vehicle (EV) applications, accurate SOH estimation minimizes failure risk and improves reliability by predicting battery health conditions. The challenge of accurate estimation of SOH is based on the uncertain dynamic operating condition of the EVs and the complex nonlinear electrochemical characteristics exhibited by the lithiumāion battery. This paper presents an artificial neural network (ANN) classifier experimentally validated for the SOH estimation of lithiumāion batteries. The ANNābased classifier model is trained experimentally at room temperature under dynamic variable load conditions. Based on SOH characterization, the training is done using features such as the relative values of voltage, state of charge (SOC), state of energy (SOE) across a buffer, and the instantaneous states of SOC and SOE. At implementation, due to the slow dynamics of SOH, the algorithm is triggered on a largeāscale periodicity to extract these features into buffers. The features are then applied as input to the trained model for SOH estimation. The classifier is validated experimentally under dynamic varying load, constant load, and step load conditions. The model accuracies for validation data are 96.2%, 96.6%, and 93.8% for the respective load conditions. It is further demonstrated that the model can be applied on multiple cell types of similar specifications with an accuracy of about 96.7%. The performance of the model analyzed with the confusion matrices is consistent with the requirements of the automotive industry. The classifier was tested on a Texas F28379D microcontroller unit (MCU) board. The result shows that an average realātime execution speed of 8.34 Ī¼s is possible with a negligible memory occupation
Are universities responding to the needs of students from refugee backgrounds?
Although many Australian universities have been proactive in responding to students' diverse needs through orientation and support programs, very little is known about programs needed for the successful transition of students from refugee backgrounds into tertiary study. Facilitating the early engagement of students with their studies and campus life is linked to greater student satisfaction, improved retention rates and better educational outcomes. One of the challenges that academics face is the paucity of research on the learning styles and academic needs of African and Middle Eastern students from refugee backgrounds.This paper reports on a needs analysis undertaken with a group of students from refugee backgrounds in Victoria and Western Australia, using in-depth interviews and focus group discussions. Participants reported that current support systems and programs are inadequate or non-existent and that many feel disadvantaged compared to Australian-born and international students. The article concludes with recommendations on how universities can better respond to the needs of students from refugee backgrounds
Accelerometer-based SOC estimation methodology for combustion control applied to Gasoline Compression Ignition
The European Community's recent decision to suspend the marketing of cars with conventional fossil-fueled internal combustion engines from 2035 requires new solutions, based on carbon-neutral technologies, that ensure equivalent performances in terms of reliability, trip autonomy, refueling times and end-of-life disposal of components compared to those of current gasoline or diesel cars. The use of bio-fuels and hydrogen, which can be
obtained by renewable energy sources, coupled with high-efficiency combustion methodologies might allow to reach the carbon neutrality of transports (net-zero carbon dioxide emissions) even using the well-known internal combustion engine technology. Bearing this in mind, experiments were carried out on compression ignited engines running on gasoline (GCI) with a high thermal efficiency which, in the future, could be easily adapted to run on a
bio-fuel. Despite the well-reported benefits of GCI engines in terms of efficiency and pollutant emissions, combustion instability hinders the diffusion of these engines for industrial applications. A possible solution to stabilize GCI combustion is the use of multiple injections strategies, typically composed by 2 early injected fuel jests followed by the main injection. The heat released by the combustion of the earlier fuel jets allows to reduce the ignition delay of the main injection, directly affecting both delivered torque and center of combustion. As a result,
to properly manage GCI engines, a stable and reliable combustion of the pre-injections is mandatory. In this paper, an estimation methodology of the start of combustion (SOC) position, based on the analysis of the signal coming from an accelerometer sensor mounted on the engine block, is presented (the optimal sensor positioning is also discussed). A strong correlation between the SOC calculated from the accelerometer and that obtained from the
analysis of the rate of heat release (RoHR) was identified. As a result, the estimated SOC could be used to feedback an adaptive closed-loop combustion control algorithm, suitable to improve the stability of the whole combustion process
Electron temperature fluctuation measurements in the pedestal of improved confinement regimes at ASDEX Upgrade
US DOE (DE-SC0006419, DE-SC0014264, and DE- SC0017381)EUROfusion Consortium (No. 633053
A Cloud Based Service for Management and Planning of Autonomous UAV Missions in Smart City Scenarios
Cloud Robotics is an emerging paradigm in which robots, seen as abstract
agents, have the possibility to connect to a common network and share on
a complex infrastructure the information and knowledge they gather about the physical world; or conversely consume the data collected by other agents or made available on accessible database and repositories. In this paper we propose an implementation of an emergency-management service exploiting the possibilities offered by cloud robotics in a smart city scenario. A high-level cloud-platform manages a number of unmanned aerial vehicles (quadrotor UAVs) with the goal of providing aerial support to citizens that require it via a dedicated mobile app. The UAV reaches the citizen while forwarding a realtime video streaming to a privileged user (police officer),connected to the same cloud platform, that is allowed to teleoperate it by remote
Experimental Characterization of Hydrocarbons and Nitrogen Oxides Production in a Heavy-Duty DieselāNatural Gas Reactivity-Controlled Compression Ignition Engine
Reactivity-Controlled Compression Ignition (RCCI) combustion is considered one of the most promising Low-Temperature Combustion (LTC) concepts aimed at reducing greenhouse gases for the transportation and power generation sectors. Due to the spontaneous combustion of a lean, nearly homogeneous mixture of air and low-reactivity fuel (LRF), ignited through the direct injection of a small quantity of high-reactivity fuel (HRF), RCCI (dual-fuel) shows higher efficiency and lower pollutants compared to conventional diesel combustion (CDC) if run at very advanced injection timing. Even though a HRF is used, the use of advanced injection timing leads to high ignition delays, compared to CDC, and generates high cycle-to-cycle variability, limited operating range, and high pressure rise rates at high loads. This work presents an experimental analysis performed on a heavy-duty single-cylinder compression ignited engine in dual-fuel diesel-natural gas mode. The objective of the present work is to investigate and highlight the correlations between combustion behavior and pollutant emissions, especially unburned hydrocarbons (HC) and oxides of nitrogen (NOx). Based on the analysis of crank-resolved pollutants measurements performed through fast FID and fast NOx systems under different engine operating conditions, two correlations were found demonstrating a good accordance between pollutant production and combustion behavior: Net Cyclic Hydrocarbon emission-cyclic IMEP variations (R-2 = 0.86), and Cyclic NOx-maximum value of the Rate of Heat Released (R-2 = 0.82)
ASCOT orbit-following simulations of ion cyclotron heating with synthetic fast ion loss diagnostic: a first application to ASDEX Upgrade
- ā¦