Dependence of chaotic behavior on optical properties and electrostatic effects in double beam torsional Casimir actuation

We investigate the influence of Casimir and electrostatic torques on double beam torsional microelectromechanical systems with materials covering a broad range of conductivities of more than three orders of magnitude. For the frictionless autonomous systems, bifurcation and phase space analysis shows that there is a significant difference between stable and unstable operating regimes for equal and unequal applied voltages on both sides of the double torsional system giving rise to heteroclinic and homoclinic orbits, respectively. For equal applied voltages, only the position of a symmetric unstable saddle equilibrium point is dependent on the material optical properties and electrostatic effects, while in any other case there are stable and unstable equilibrium points are dependent on both factors. For the periodically driven system, a Melnikov function approach is used to show the presence of chaotic motion rendering predictions of whether stiction or stable actuation will take place over long times impossible. Chaotic behavior introduces significant risk for stiction, and it is more prominent to occur for the more conductive systems that experience stronger Casimir forces and torques. Indeed, when unequal voltages are applied, the sensitive dependence of chaotic motion on electrostatics is more pronounced for the highest conductivity systems.Comment: 24 pages, 11 figure

Change in bone mineral density in post menopausal women with rheumatoid arthritis

Introduction: Low bone mass is a serious complication of post menopausal women with rheumatoid arthritis. We determined the Change in Bone Mineral Density in postmenopausal women with rheumatoid arthritis. Methods: This retrospective cohort study was carried out on consecutive postmenopausal women with rheumatoid arthritis who were referred to the Azar 5th teaching hospital affiliated to Golestan University of Medical Sciences, North of Iran in 2009. The required data were gathered from the patients' medical records. The data were analyzed using SPSS software and statistical tests. Results: We studied 98 postmenopausal women with rheumatoid arthritis. Mean number of years since menopause and mean duration of disease were 9.39 and 5.13 respectively. T Score mean in femoral neck and lumbar spines was -1.45±1.26 and -2.45±1.44 respectively. The overall prevalence of osteoporosis at both the lumbar spine and femoral neck was 13.3. We have found a significant correlation between age, duration of disease, duration of menopause and bone mineral density (P-Value<0.01). Conlusion: Our results indicate a negative effect of age, number of years since menopause and duration of disease on bone mineral density. So, BMD should be measured in high risk women prior to the implementation of any treatment or prevention program

Sensitivity of nonequilibrium Casimir forces on low frequency optical properties toward chaotic motion of microsystems:Drude vs plasma model

Here, we investigate the sensitivity of nonequilibrium Casimir forces to optical properties at low frequencies via the Drude and plasma models and the associated effects on the actuation of microelectromechanical systems. The stability and chaotic motion for both autonomous conservative and nonconservative driven systems were explored assuming good, e.g., Au, and poor, e.g., doped SiC, interacting conductors having large static conductivity differences. For both material systems, we used the Drude and plasma methods to model the optical properties at low frequencies, where measurements are not feasible. In fact, for the conservative actuating system, bifurcation and phase space analysis show that the system motion is strongly influenced by the thermal nonequilibrium effects depending on the modeling of the optical properties at low frequencies, where also the presence of residual electrostatic forces can also drastically alter the actuating state of the system, depending strongly on the material conductivity. For nonconservative systems, the Melnikov function approach is used to explore the presence of chaotic motion rendering predictions of stable actuation or malfunction due to stiction on a long-term time scale rather impossible. In fact, the thermal effects produce the opposite effect for the emerging chaotic behavior for the Au-Au and SiC-SiC systems if the Drude model is used to model the low optical frequencies. However, using the plasma model, only for the poor conducting SiC-SiC system, the chance of chaotic motion is enhanced, while for the good conducting Au-Au system, the chaotic behavior will remain unaffected at relatively short separations (<2 μm)

Dependence of non-equilibrium Casimir forces on material optical properties toward chaotic motion during device actuation

The sensitivity of nonequilibrium Casimir forces on material optical properties can have strong impact on the actuation of devices. For this purpose, we considered nonequilibrium Casimir interactions between good and poor conductors, for example, gold (Au) and highly doped silicon carbide (SiC), respectively. Indeed, for autonomous conservative systems, the bifurcation and phase portrait analysis have shown that the nonequilibrium Casimir forces can have significant impact on the stable and unstable operating regimes depending on the material optical properties. At a few micrometer separations, for systems with high conductivity materials, an increasing temperature difference between the actuating components can enhance the stable operation range due to the reduction of the Casimir force, while for the poor conductive materials, the opposite takes place. For periodically driven dissipative systems, the Melnikov function and Poincare portrait analysis have shown that for poor conductive systems, the nonequilibrium Casimir forces lead to an increased possibility for chaotic behavior and stiction with an increasing temperature difference between the actuating components. However, for good conducting systems, the thermal contribution to Casimir forces reduces the possibility for chaotic behavior with increasing temperature, as comparison with systems without thermal fluctuations shows. Nevertheless, the positive benefit of good conductors toward increased actuation stability and reduced the chaotic behavior under nonequilibrium conditions can be easily compromised by any voltage application. Therefore, thermal, nonequilibrium Casimir forces can influence the actuation of devices toward unstable and chaotic behavior in strong correlation with their optical properties, and associated conduction state, as well as applied electrostatic potentials

On a 3D material modelling of smart nanocomposite structures

Smart composites (SCs) are utilized in electro-mechanical systems such as actuators and energy harvesters. Typically, thin-walled components such as beams, plates, and shells are employed as structural elements to achieve the mechanical behavior desired in these composites. SCs exhibit various advanced properties, ranging from lower order phenomena like piezoelectricity and piezomagneticity, to higher order effects including flexoelectricity and flexomagneticity. The recently discovered flexomagneticity in smart composites has been investigated under limited conditions. A review of the existing literature indicates a lack of evaluation in three-dimensional (3D) elasticity analysis of SCs when the flexomagnetic effect (FM) exists. To address this issue, the governing equations will incorporate the term ∂/∂z, where z represents the thickness coordinate. The variational technique will guide us in further developing these governing equations. By using hypotheses and theories such as a 3D beam model, von Kármán's strain nonlinearity, Hamilton's principle, and well-established direct and converse FM models, we will derive the constitutive equations for a thick composite beam. Conducting a 3D analysis implies that the strain and strain gradient tensors must be expressed in 3D forms. The inclusion of the term ∂/∂z necessitates the construction of a different model. It should be noted that current commercial finite element codes are not equipped to accurately and adequately handle micro- and nano-sized solids, thus making it impractical to model a flexomagnetic composite structure using these programs. Therefore, we will transform the derived characteristic linear three-dimensional bending equations into a 3D semi-analytical Polynomial domain to obtain numerical results. This study demonstrates the importance of conducting 3D mechanical analyses to explore the coupling effects of multiple physical phenomena in smart structures

Prevalence, and virulence determination of listeria monocytogenes strains isolated from clinical and non-clinical samples by multiplex polymerase chain reaction

Introduction: This study aimed to determine the prevalence, and virulence factors of Listeria monocytogenes isolated from various samples by multiplex polymerase chain reaction (MPCR). Methods: A total of 617 isolates were obtained and MPCR was employed for detection of the inlA, inlC, and inlJ genes. Results: L. monocytogenes was detected in 46 (7.45) of the 617 specimens. inlA, inlC, and inlJ were detected in 100, 76.26, and 71 isolates, respectively. Conclusions: This study validated MPCR in the analysis and rapid detection of L. monocytogenes. The role of the genes in pathogenesis of the strains can also be affirmed. © 2016, Sociedade Brasileira de Medicina Tropical. All rights reserved