AC Loss and Contact Resistance In Copper-Stabilized Nb3Al Rutherford Cables with and without a Stainless Steel Core

Calorimetric measurements of AC loss and hence interstrand contact resistance (ICR), were measured on three samples of Rutherford cable wound with Cu-stabilized jelly-roll type unplated Nb3Al strand. One of the cable types was furnished with a thin core of AISI 316L stainless steel and the other two were both uncored but insulated in different ways. The cables were subjected to a room-temperature-applied uniaxial pressure of 12 MPa that was maintained during the reaction heat treatment (RHT), then vacuum impregnated with CTD 101 epoxy, and repressurized to 100 MPa during AC-loss measurement. The measurements were performed at 4.2 K in a sinusoidal field of amplitude 400 mT at frequencies of 1 to 90 mHz (no DC-bias field) that was applied both perpendicular and parallel to the face of the cable (the face-on, FO, and edge-on, EO, directions, respectively). For the cored cable the FO-measured effective ICR (FO-ICR), was 5.27 . Those for the uncored cables were less than 0.08 . As shown previously for NbTi- and Nb3Sn-based Rutherford cables, the FO-ICR can be significantly increased by the insertion of a core, although in this case it is still below the range recommended for accelerator-magnet use. Post-measurement dissection of one of the cables showed that the impregnating resin had permeated between the strands and coated the core with a thin, insulating layer excepting for some sintered points of contact. In the uncored cables the strands were coated with resin except for the points of interstrand contact. It is suggested that in the latter case this tendency for partial coating leads to a processing-sensitive FO-ICR.Comment: Four pages, with two figure

Diagnosis and Placement Variables Affecting the Outcome of Adolescents with Behavioral Disorders

The treatment of adolescents with behavior disorders represents significant challenges. This article reviews some of the most effective behavioral and pharmacological treatments identified in the research. The study used outcome data from a residential treatment program to identify variables that predicted level of functioning post-discharge. Significant variables included diagnosis (mood vs. behavior disorder spectrum), co-morbidity and discharge placement

Assistance to the tourist industry

This study has been carried out as part of the government's continuing review of the economy, in particular the levels of assistance provided to various sectors, and examines the levels of assistance given to the tourism sector in New Zealand. The measurement of the effective rates of assistance (as distinct from effective rate of protection) is a relatively new concept but has recently become accepted as a comparative analysis tool. It allows different forms of assistance to be aggregated and for a comparison of the assistance to different sectors of the economy

Diel rhythmicity in amino acid uptake by Prochlorococcus

The marine cyanobacterium Prochlorococcus, the most abundant phototrophic organism on Earth, numerically dominates the phytoplankton in nitrogen (N)-depleted oceanic gyres. Alongside inorganic N sources such as nitrite and ammonium, natural populations of this genus also acquire organic N, specifically amino acids. Here, we investigated using isotopic tracer and flow cytometric cell sorting techniques whether amino acid uptake by Prochlorococcus is subject to a diel rhythmicity, and if so, whether this was linked to a specific cell cycle stage. We observed, in contrast to diurnally similar methionine uptake rates by Synechococcus cells, obvious diurnal rhythms in methionine uptake by Prochlorococcus cells in the tropical Atlantic. These rhythms were confirmed using reproducible cyclostat experiments with a light synchronised axenic Prochlorococcus (PCC9511 strain) culture and 35S-methionine and 3H-leucine tracers. Cells acquired the tracers at lower rates around dawn and higher rates around dusk despite >104 times higher concentration of ammonium in the medium, presumably because amino acids can be directly incorporated into protein. Leucine uptake rates by cells in the S+G2 cell cycle stage were consistently 2.2 times higher than those of cells at the G1 stage. Furthermore, S+G2 cells up-regulated amino acid uptake 3.5 times from dawn to dusk to boost protein synthesis prior to cell division. Because Prochlorococcus populations can account from 13% at midday, and up to 42% at dusk, of total microbial uptake of methionine and probably of other amino acids in N-depleted oceanic waters, this genus exerts diurnally variable, strong competitive pressure on other bacterioplankton populations

Energy harvesting from transverse galloping

Some elastic bluff bodies under the action of a fluid flow can experience transverse galloping and lose stability if the flow velocity exceeds a critical value. For flow velocities higher than this critical value, there is an energy transfer from the flow to the body and the body develops an oscillatory motion. Usually, it is considered as an undesirable effect for civil or marine structures but here we will show that if the vibration is substantial, it can be used to extract useful energy from the surrounding flow. This paper explores analytically the potential use of transverse galloping in order to obtain energy. To this end, transverse galloping is described by a one-degree-of-freedom model where fluid forces obey the quasi-steady hypothesis. The influence of cross-section geometry and mechanical properties in the energy conversion factor is investigated

A prescriptive approach to qualify and quantify customer value for value-based requirements engineering

Recently, customer-based product development is becoming a popular paradigm. Customer expectations and needs can be identified and transformed into requirements for product design with the help of various methods and tools. However, in many cases, these models fail to focus on the perceived value that is crucial when customers make the decision of purchasing a product. In this paper, a prescriptive approach to support value-based requirements engineering (RE) is proposed, describing the foundations, procedures and initial applications in the context of RE for commercial aircraft. An integrated set of techniques, such as means-ends analysis, part-whole analysis and multi-attribute utility theory is introduced in order to understand customer values in depth and width. Technically, this enables identifying the implicit value, structuring logically collected statements of customer expectations and performing value modelling and simulation. Additionally, it helps to put in place a system to measure customer satisfaction that is derived from the proposed approach. The approach offers significant potential to develop effective value creation strategies for the development of new product

Vitamin C Intravenous Treatment In the Setting of Atrial Fibrillation Ablation: Results From the Randomized, Double-Blinded, Placebo-Controlled CITRIS-AF Pilot Study

BackgroundCatheter ablation is an effective treatment for atrial fibrillation (AF), but high levels of post-procedure inflammation predict adverse clinical events. Ascorbic acid (AA) has shown promise in reducing inflammation but is untested in this population. We sought to test the feasibility, safety, and preliminary effects on inflammatory biomarkers in the CITRIS-AF (Vitamin C Intravenous Treatment In the Setting of Atrial Fibrillation Ablation) pilot study. Methods and ResultsPatients scheduled to undergo AF ablation (N=20) were randomized 1:1 to double-blinded treatment with AA (200 mg/kg divided over 24 hours) or placebo. C-reactive protein and interleukin-6 levels were obtained before the first infusion and repeated at 24 hours and 30 days. Pain levels within 24 hours and early recurrence of AF within 90 days were recorded. Median and interquartile range were aged 63 (56–70) years, 13 (65%) men, and 18 (90%) white. Baseline data were similar between the 2 groups except ejection fraction. Baseline C-reactive protein levels were 2.56 (1.47–5.87) mg/L and similar between groups (P=0.48). Change in C-reactive protein from baseline to 24 hours was +10.79 (+6.56–23.19) mg/L in the placebo group and +3.01 (+0.40–5.43) mg/L in the AA group (P=0.02). Conversely, change in interleukin-6 was numerically higher in the AA group, though not statistically significant (P=0.32). One patient in each arm developed pericarditis; no adverse events related to the infusions were seen. There were no significant differences between aggregated post-procedure pain levels within 24 hours or early recurrence of AF (both P\u3e0.05). ConclusionsHigh-dose AA is safe and well tolerated at the time of AF ablation and may be associated with a blunted rise in C-reactive protein, although consistent findings were not seen in interleukin-6 levels. Further studies are needed to validate these findings and explore the potential benefit in improving clinically relevant outcomes

Mechanical design of a high field common coil magnet

A common coil design for high field 2-in-1 accelerator magnets has been previously presented as a "conductor-friendly" option for high field magnets applicable for a Very Large Hadron Collider. This paper presents the mechanical design for a 14 tesla 2-in-1 dipole based on the common coil design approach. The magnet will use a high current density Nb/sub 3/Sn conductor. The design addresses mechanical issues particular to the common coil geometry: horizontal support against coil edges, vertical preload on coil faces, end loading and support, and coil stresses and strains. The magnet is the second in a series of racetrack coil magnets that will provide experimental verification of the common coil design approach. (9 refs)

Coevolution with bacteriophages drives genome-wide host evolution and constrains the acquisition of abiotic-beneficial mutations

This is the author accepted manuscript. The final version is available from OUP via the DOI in this record.Studies of antagonistic coevolution between hosts and parasites typically focus on resistance and infectivity traits. However, coevolution could also have genome-wide effects on the hosts due to pleiotropy, epistasis, or selection for evolvability. Here, we investigate these effects in the bacterium Pseudomonas fluorescens SBW25 during approximately 400 generations of evolution in the presence or absence of bacteriophage (coevolution or evolution treatments, respectively). Coevolution resulted in variable phage resistance, lower competitive fitness in the absence of phages, and greater genome-wide divergence both from the ancestor and between replicates, in part due to the evolution of increased mutation rates. Hosts from coevolution and evolution treatments had different suites of mutations. A high proportion of mutations observed in coevolved hosts were associated with a known phage target binding site, the lipopolysaccharide (LPS), and correlated with altered LPS length and phage resistance. Mutations in evolved bacteria were correlated with higher fitness in the absence of phages. However, the benefits of these growth-promoting mutations were completely lost when these bacteria were subsequently coevolved with phages, indicating that they were not beneficial in the presence of resistance mutations (consistent with negative epistasis). Our results show that in addition to affecting genome-wide evolution in loci not obviously linked to parasite resistance, coevolution can also constrain the acquisition of mutations beneficial for growth in the abiotic environment.This work was funded by European Research Council and NERC (UK)

The role of aerodynamic forces in a mathematical model for suspension bridges

In a fish-bone model for suspension bridges studied by us in a previous paper we introduce linear aerodynamic forces. We numerically analyze the role of these forces and we theoretically show that they do not influence the onset of torsional oscillations. This suggests a new explanation for the origin of instability in suspension bridges: it is a combined interaction between structural nonlinearity and aerodynamics and it follows a precise pattern. This gives an answer to a long-standing question about the origin of torsional instability in suspension bridges