Two load sharing plates fixation in mandibular condylar fractures: Biomechanical basis

Mandibular condylar fractures have a high incidence but there is no consensus regarding the best choice of osteosynthesis. From a review of the literature, it is evident that the technique used most frequently for fixation is the positioning of a single plate despite complications concerning plate fracture or screw loosening have been reported by various authors. Different studies have highlighted that the stability of osteosynthesis is correlated with the mechanical strains occurring in the condylar region, generated by the muscles of mastication. The aim of our study was, through a mandibular finite element model (FEM), to confirm this correlation and to analyse the behaviour of single and double elements of union in the fixation of mandibular subcondylar fractures. We concluded that the use of two plates provides greater stability compared with the single plate, reducing the possibility of displacement of the condylar fragment. Therefore we recommend that this technique should be adopted whenever possible

Reaction Dynamics for the Systems 7Be,8B + 208Pb at Coulomb Barrier Energies

In this contribution we describe the first results obtained for the investigation of the elastic scattering process in the reactions induced by the Radioactive Ion Beams 7Be and 8B on a 208Pb target at Coulomb barrier energies. The experimental data were analyzed within the framework of the optical model in order to extract the total reaction cross section. The comparison with data available in literature for reactions induced on 208Pb by light ions in the mass range A = 6-8 shows that the loosely-bound 8B has the largest reactivity

Long term effectiveness of electrochemotherapy for the treatment of lower lip squamous cell carcinoma

Purpose: Electrochemotherapy (ECT) is a therapeutic approach based on the local application of electrical pulses that permeabilize cell membranes to enhance the uptake of low-permeant chemotherapeutic agents, thus increasing their cytotoxic effects. Materials and Methods: Twenty-one patients with SCC of the lower lip were treated according to the European Standard Operating Procedures of Electrochemotherapy. Bleomycin (15,000 IU/m2 body surface area) was administered intravenously over a 1-minute period. Eight electrical pulses (amplitude, 1000 V/cm; duration, 100 μs) were generated and delivered at a repetition frequency of 5 kHz. Changes in tumor volume were used to assess treatment response. Results: Objective response (OR), complete response (CR), and partial response (PR) rates of 100%, 71.4%, and 28.6% respectively were demonstrated following a single session of ECT. ECT was well tolerated, and no adverse events occurred. Conclusions: Intravenous bleomycin-based ECT is a safe and effective therapy for SCC of the lower lip. ECT improves the quality-of-life of patients by preserving the function and the aesthetic appearance of the affected area. ECT provides a therapeutic option for elderly and frail patients who, due to their state of health, are not suitable for, or refuse surgical interventions

High-rate deposition of microcrystalline silicon in a large-area PECVD reactor and integration in tandem solar cells

We study the high-rate deposition of microcrystalline silicon in a large-area plasma-enhanced chemical-vapor-deposition (PECVD) reactor operated at 40.68 MHz, in the little-explored process conditions of high-pressure and high-silane concentration and depletion. Due to the long gas residence time in this process, the silane gas is efficiently depleted using moderate feed-in power density, thus facilitating up-scaling of the process to large surfaces. As observed in more traditional deposition processes, the deposition rate and performance of device-quality material are limited by the inter-electrode gap of the reactor. We significantly increase the cell performances by reducing this gap. X-ray diffractometry (XRD) and secondary ion mass spectroscopy (SIMS) are used to characterize the microcrystalline material deposited in the modified reactor at a rate of 1 nm/s. Comparison with a microcrystalline process at a low deposition rate demonstrates that the crystallographic orientation of the absorbing layer of the cell and the concentrations of contaminants are strongly correlated and dependent on the process. We use microcrystalline cells with absorber layer grown at a rate of 1 nm/s integrated as bottom cells in amorphous-microcrystalline (micromorph) tandem solar cells using the superstrate configuration. We report an initial efficiency of 10.8% (9.6% stabilized) for a tandem cell with 1.2 cm2 surface. Copyright # 2010 John Wiley & Sons, Ltd

Extracellular Superoxide Dismutase Expression in Papillary Thyroid Cancer Mesenchymal Stem/Stromal Cells Modulates Cancer Cell Growth and Migration

Tumor stroma-secreted growth factors, cytokines, and reactive oxygen species (ROS) influence tumor development from early stages to the metastasis phase. Previous studies have demonstrated downregulation of ROS-producing extracellular superoxide dismutase (SOD3) in thyroid cancer cell lines although according to recent data, the expression of SOD3 at physiological levels stimulates normal and cancer cell proliferation. Therefore, to analyze the expression of SOD3 in tumor stroma, we characterized stromal cells from the thyroid. We report mutually exclusive desmoplasia and inflammation in papillary and follicular thyroid cancers and the presence of multipotent mesenchymal stem/stromal cells (MSCs) in non-carcinogenic thyroids and papillary thyroid cancer (PTC). The phenotypic and differentiation characteristics of Thyroid MSCs and PTC MSCs were comparable with bone marrow MSCs. A molecular level analysis showed increased FIBROBLAST ACTIVATING PROTEIN, COLLAGEN 1 TYPE A1, TENASCIN, and SOD3 expression in PTC MSCs compared to Thyroid MSCs, suggesting the presence of MSCs with a fibrotic fingerprint in papillary thyroid cancer tumors and the autocrine-paracrine conversion of SOD3 expression, which was enhanced by cancer cells. Stromal SOD3 had a stimulatory effect on cancer cell growth and an inhibitory effect on cancer cell migration, thus indicating that SOD3 might be a novel player in thyroid tumor stroma

Reaction dynamics studies for the system 7Be + 208Pb at Coulomb barrier energies

The scattering process of the Radioactive Ion Beam 7Be from a 208Pb target was measured at three near-barrier energies. The quasi-elastic angular distributions were analyzed within the framework of the optical model to extract the reaction cross sections. The results are compared with those obtained for the reactions induced by the mirror projectile 7Li and by the lightest particle-stable lithium isotope 6Li on the same target. The angular distributions for the production of the two 7Be constituent clusters, namely 3He and 4He, were also measured. In agreement with what observed for the interaction of 7Be with lighter targets, the production of the heavier helium isotope resulted to be much more abundant than that of its lighter counterpart

Reaction dynamics induced by the radioactive ion beam 7Be on medium-mass and heavy targets

We studied the reaction dynamics induced at Coulomb barrier energies by the weakly-bound Radioactive Ion Beam 7Be (Sα = 1.586 MeV) on medium-mass (58Ni) and heavy (208Pb) targets. The experiments were performed at INFN-LNL (Italy), where a 2-3×105 pps 7Be secondary beam was produced with the RIB in-flight facility EXOTIC. Charged reaction products were detected by means of high-granularity silicon detectors in rather wide angular ranges. The contribution presents an up-to-date status of the data analysis and theoretical interpretation for both systems.European Commission, Seventh Framework Programme 60037

Impact of secondary gas-phase reactions on microcrystalline silicon solar cells deposited at high rate

The role of secondary gas-phase reactions during plasma-enhanced chemical vapor deposition of microcrystalline silicon is a controversial subject. In this paper, we show that the enhancement of such reactions is associated with the improvement of material properties of absorber layers deposited at high constant rate. We detect powder, a product of secondary gas-phase reactions, via infrared laser absorption spectroscopy, laser light scattering, and optical emission spectroscopy. As the powder formation is increased, we measure a systematic improvement of device performance. This demonstrates that secondary gas-phase reactions are not detrimental to the material quality of microcrystalline silicon deposited at high rate. © 2010 American Institute of Physics

Electronics design of the RPC system for the OPERA muon spectrometer

The present document describes the front-end electronics of the RPC system that instruments the magnet muon spectrometer of the OPERA experiment. The main task of the OPERA spectrometer is to provide particle tracking information for muon identification and simplify the matching between the Precision Trackers. As no trigger has been foreseen for the experiment, the spectrometer electronics must be self-triggered with single-plane readout capability. Moreover, precision time information must be added within each event frame for off-line reconstruction. The read-out electronics is made of three different stages: the Front-End Boards (FEBs) system, the Controller Boards (CBs) system and the Trigger Boards(TBs) system. The FEB system provides discrimination of the strip incoming signals; a FAST-OR output of the input signals is also available for trigger plane signal generation. FEB signals are acquired by the CB system that provides the zero suppression and manages the communication to the DAQ and Slow Control. A Trigger Board allows to operate in both self-trigger mode (the FEB’s FAST-OR signal starts the plane acquisition) or in external-trigger mode (different conditions can be set on the FAST-OR signals generated from different planes)

Development of Micromorph Cells in Large-Area Industrial Reactor

The influences of the deposition pressure and silane depletion on the efficiency of single-junction microcrystalline silicon solar cells has been investigated. The efficiency is found to correlate with the ion energy which affects the density of states in the absorber material. Cell with efficiency of 7.3% at a deposition rate of 1 nm/s, and, respectively, 7.8% at 0.35 nm/s were deposited in R&D KAI M industrial reactor. Silicon oxide based intermediate reflector layers were developed in KAI reactor for incorporation in micromorph devices. Material with an index of refraction of 1.7 at 600 nm and low lateral conductivity were deposited. Micromorph devices incorporating these intermediate reflector layers were fabricated with initial efficiency of 12.3% at a deposition rate of 0.35 nm/s and 10.8% at 1 nm/s