11 research outputs found
Applying biomechanics in orthopedics
Biological response of tissues constituting the skeletal system against load and trauma will be discussed in this chapter. Real-life situations due to individual differences such as genetics, age, gender and anatomy are sometimes difficult to simulate. Mathematical formulation of the relationship between joints and movement can be theorized easily with some assumptions. Basic methodology of orthopedic diseases treatment, however, is closely associated with this biological response. © Springer International Publishing Switzerland 2016
Tibia stress fracture secondary to obsessive compulsive disorder
PubMedID: 27284118Obsessive compulsive disorder (OCD) is a chronic psychiatric disorder characterized by obsessions and compulsions. Early-onset OCD is one of the most common mental illnesses of children and adolescents, with a prevalence of 1% to 3%. It is related to worse lifespan symptoms and prognosis. Therefore, the treatment of OCD in children and adolescent has gained importance. If it is not treated successfully, the compulsive behaviors may cause extreme stress for children and their parents. Although minor complications of OCD are commonly observed, major complications are considerably rare due to the nature of compulsive behaviors. Apparently, loss of vision, autocastration, rectal prolapse are examples of major complications secondary to OCD. As far as we know, it is the first case of tibia stress fracture secondary to OCD. In the present case report, we will discuss tibia stress fracture developing secondary to compulsive behavior due to OCD. © SAGE Publications
THE FOLDED DOUBLE PADDLED FREE FLAP FOR ORAL CAVITY RECONSTRUCTION
Six radial forearm flaps, two transverse rectus abdominis flaps and one latissimus dorsi myocutaneous flap were used in a bipaddled fashion for full thickness defects of the cheek and the floor of the mouth resulting from cancer resection. The flaps provided both intraoral lining and skin cover in all cases. Immediate reconstruction was carried out following tumor resection in six cases. In three patients who presented with large full thickness defects due to failure of primary reconstruction, late reconstruction with double paddled free flaps was performed. All transfers were successful, in the latissimus dorsi transfer a minimal area of necrosis occurred at the tip of the flap. A salivary fistula developed in two cases, both healed spontaneously up to three weeks postoperatively. The average operating time was 5.5 h; the average hospital stay was 13.4 days
Long-term effectiveness of steroid injections and splinting in mild and moderate carpal tunnel syndrome
Adduction contracture of the shoulder due to fibrous long head of the triceps in children
Investigation of toggling effect on pullout performance of pedicle screws
Objective of this study is to assess the pullout performance of various pedicle screws in different test materials after toggling tests comparatively. Solid core, cannulated (cemented), novel expandable and solid-core (cemented) pedicle screws were instrumented to the polyurethane foams (Grade 10 and Grade 40) produced in laboratory and bovine vertebra. ASTM F543 standard was used for preparation process of samples. Toggling tests were carried out. After toggling test procedures, pullout tests were performed. Load versus displacement graph was recorded, and the ultimate pullout force was defined as the maximum load (pullout strength) sustained before failure of screw. Anteriosuperior and oblique radiographs were taken from each sample after instrumentation in order to examine screw placement and cement distribution. The pullout strength of pedicle screws decreased after toggling tests with respect to the initial condition. While the cemented solid-core pedicle screws had the highest pullout strength in all test materials, they had the highest strength differences. The cemented solid-core pedicle screws had decrement rates of 27% and 16% in Grade 10 and Grade 40, respectively. There are almost same decrement rate (between 5.5% and 6.5%) for all types of pedicle screws instrumented to the samples of bovine vertebra. The pullout strengths of novel expandable pedicle screws in both of early period and after toggling conditions were almost similar, in other words, the decrement rates of it were lower than other types. According to the data collected from this study, polymethylmethacrylate augmentation significantly decreases pullout strength following the toggling loads. Higher brittleness of cured polymethylmethacrylate has adverse effect on the pullout strength. Although augmentation is an important process for enhancing pullout strength in early period, it has some disadvantages for preserving stabilization in a long time. Expandable pedicle screw with polyetheretherketone shell may be good alternative to polymethylmethacrylate augmentation on both primer stabilization and long-term loading application with toggling
Oral toxicity of isotretinoin, misoprostol, methotrexate, mifepristone and levonorgestrel as pregnancy category X medications in female mice
How to improve the safety of bicortical pedicle screw insertion in the thoracolumbar vertebrae: analysis base on three-dimensional CT reconstruction of patients in the prone position
Pullout performance comparison of novel expandable pedicle screw with expandable poly-ether-ether-ketone shells and cement-augmented pedicle screws
Aim of this study is to assess the pullout performance of various pedicle screws in different test materials. Polyurethane foams (Grade 10 and Grade 40) produced in laboratory and bovine vertebrae were instrumented with normal, cannulated (cemented), novel expandable and normal (cemented) pedicle screws. Test samples were prepared according to the ASTM F543 standard testing protocols and surgical guidelines. To examine the screw placement and cement distribution, anteriosuperior and oblique radiographs were taken from each sample after insertion process was completed. Pullout tests were performed in an Instron 3369 testing device. Load versus displacement graphs were recorded and the ultimate pullout force was defined as the maximum load (pullout strength) sustained before failure of screw. Student's t-test was performed on each group whether the differences between pullout strength of pedicle screws were significant or not. While normal pedicle screws have the lowest pullout strength in all test materials, normal pedicle screws cemented with polymethylmethacrylate exhibit significantly higher pullout performance than others. For all test materials, there is a significant improvement in pullout strength of normal screws by augmentation. While novel expandable pedicle screws with expandable poly-ether-ether-ketone shells exhibited lower pullout performance than normal screws cemented with polymethylmethacrylate, their pullout performances in all groups were higher than the ones of normal and cannulated pedicle screws. For all test materials, although cannulated pedicle screws exhibit higher pullout strength than normal pedicle screws, there are no significant differences between the two groups. The novel expandable pedicle screws with expandable poly-ether-ether-ketone shells may be used instead of normal and cannulated pedicle screws cemented with polymethylmethacrylate due to their good performances
Biomechanical and histological evaluation of an expandable pedicle screw in osteoporotic spine in sheep
Transpedicular fixation can be challenging in the osteoporotic spine as reduced bone mineral density compromises the mechanical stability of the pedicle screw. Here, we sought to investigate the biomechanical and histological properties of stabilization of expandable pedicle screw (EPS) in the osteoporotic spine in sheep. EPSs and standard pedicle screws, SINO screws, were inserted on the vertebral bodies in four female ovariectomized sheep. Pull-out and cyclic bending resistance test were performed to compare the holding strength of these pedicle screws. High-resolution micro-computed tomography (CT) was performed for three-dimensional image reconstruction. We found that the EPSs provided a 59.6% increase in the pull-out strength over the SINO screws. Moreover, the EPSs withstood a greater number of cycles or load with less displacement before loosening. Micro-CT image reconstruction showed that the tissue mineral density, bone volume fraction, bone surface/bone volume ratio, trabecular thickness, and trabecular separation were significantly better in the expandable portion of the EPSs than those in the anterior portion of the SINO screws (P < 0.05). Furthermore, the trabecular architecture in the screw–bone interface was denser in the expandable portion of the EPS than that in the anterior portion of the SINO screw. Histologically, newly formed bone tissues grew into the center of EPS and were in close contact with the EPS. Our results show that the EPS demonstrates improved biomechanical and histological properties over the standard screw in the osteoporotic spine. The EPS may be of value in treating patients with osteoporosis and warrants further clinical studies