Additional evidence for the migration of clay upon heating of clay–polypropylene nanocomposites from X-ray photoelectron spectroscopy (XPS)

The explanation for reduction in the peak heat release rate of polymer–clay nanocomposites which is normally accepted is that clay accumulates at the surface, forming a thermal shield which is also a barrier to mass transport. The process by which this clay arrives at the surface has never been described in print but the common assumption is that pyrolysis is required for clay accumulation to occur. In this work, X-ray photoelectron spectroscopy, a tool much more sensitive in surface analysis than conventional techniques, is used to probe the surface of polypropylene–clay nanocomposites that have been annealed at relatively low temperatures, well below that required for pyrolysis. The composition of the surface changes with time and temperature of annealing, which provide a strong indication that the clay at the surface undergoes chemical change at fairly low temperatures

A Laboratory Method for Assessing Audibility and Localization of Rotorcraft Fly-In Noise

The low frequency content of rotorcraft noise allows it to be heard over great distances. This factor contributes to the disruption of natural quiet in national parks and wilderness areas, and can lead to annoyance in populated areas. Further, it can result in the sound being heard at greater distances compared to higher altitude fixed wing aircraft operations. Human response studies conducted in the field are challenging since test conditions are difficult to control. This paper presents a means of quantitatively determining the audibility and localization of rotorcraft fly-in noise, under a specified ambient noise condition, within a controlled laboratory environment. It is demonstrated using synthetic fly-in noise of a light utility helicopter. The method is shown to resolve differences in audibility distances due to different ground impedances, propagation modeling methods, and directivity angles. Further, it demonstrates the efficacy of an accelerated test method

On the strength of König's duality theorem for infinite bipartite graphs

AbstractWe prove that König's duality theorem for infinite graphs (every graph G has a matching F such that there is a selection of one vertex from each edge in F which forms a cover of G) is inherently of very high complexity in terms of both the methods of proof it requires and the computational complexity of the covers it produces. In particular, we show that there is a recursive bipartite graph such that any cover as required by the theorem is highly non-computable; indeed it must be above (in Turing degree) all the recursive iterations of the Turing jump. This implies that the theorem is proof theoretically at least as strong as the system ATR0 which is known to be strictly stronger than compactness or König's lemma. Thus the theorem cannot be proven by elementary means plus compactness. Transfinite methods are actually necessary. The actual cover given by the proof considered is seen to have an additional maximality property which makes the assertion of its existence imply a stronger system, Π11-CA0. We refine this known proof of König's theorem to show that in fact its consequences are equivalent to Π11-CA0

Surface superconducting states in a polycrystalline MgB2_{2} sample

We report results of dc magnetic and ac linear low-frequency study of a polycrystalline MgB$_2$ sample. AC susceptibility measurements at low frequencies, performed under dc fields parallel to the sample surface, provide a clear evidence for surface superconducting states in MgB$_2$.Comment: 4 pages and 5 figure

Standardized Bronchoscopy Testing for Immunocompromised Patients

Aims for Improvement Determine the consistency in which the order set was followed Determine the length of time from finding pulmonary infiltrate to consultation Determine the length of time from consultation to bronchoscopy Determine whether a follow up note was written by pulmonary Determine whether management is affected based on obtained result

Thermodynamic, Energy Efficiency, and Power Density Analysis of Reverse Electrodialysis Power Generation with Natural Salinity Gradients

Reverse electrodialysis (RED) can harness the Gibbs free energy of mixing when fresh river water flows into the sea for sustainable power generation. In this study, we carry out a thermodynamic and energy efficiency analysis of RED power generation, and assess the membrane power density. First, we present a reversible thermodynamic model for RED and verify that the theoretical maximum extractable work in a reversible RED process is identical to the Gibbs free energy of mixing. Work extraction in an irreversible process with maximized power density using a constant-resistance load is then examined to assess the energy conversion efficiency and power density. With equal volumes of seawater and river water, energy conversion efficiency of ∼33–44% can be obtained in RED, while the rest is lost through dissipation in the internal resistance of the ion-exchange membrane stack. We show that imperfections in the selectivity of typical ion exchange membranes (namely, co-ion transport, osmosis, and electro-osmosis) can detrimentally lower efficiency by up to 26%, with co-ion leakage being the dominant effect. Further inspection of the power density profile during RED revealed inherent ineffectiveness toward the end of the process. By judicious early discontinuation of the controlled mixing process, the overall power density performance can be considerably enhanced by up to 7-fold, without significant compromise to the energy efficiency. Additionally, membrane resistance was found to be an important factor in determining the power densities attainable. Lastly, the performance of an RED stack was examined for different membrane conductivities and intermembrane distances simulating high performance membranes and stack design. By thoughtful selection of the operating parameters, an efficiency of ∼37% and an overall gross power density of 3.5 W/m2 represent the maximum performance that can potentially be achieved in a seawater-river water RED system with low-resistance ion exchange membranes (0.5 Ω cm2) at very small spacing intervals (50 μm)

Etiology and Risk Factors for Infectious Keratitis in South Texas

Purpose: To determine the causative organisms and associated risk factors for infectious keratitis in South Texas. Methods: This retrospective study was performed at a tertiary teaching hospital system in South Texas. Medical records of all patients who presented with infectious keratitis from 2012 to 2018 were reviewed. Only patients with culture-proven bacterial, fungal, and Acanthamoeba keratitis were included. Results: In total, 182 eyes of 181 patients had culture-proven bacterial, fungal, or Acanthamoeba keratitis. The age of patients ranged from 3 to 93 years, with a mean of 48.3 ± 20.8 years. The most common etiologic agent was bacteria, with 173 bacterial cultures (95.1%) recovered, followed by 13 fungal cultures (7.1%), and 3 Acanthamoeba cultures (1.6%). Of the 218 bacterial isolates, coagulase-negative Staphylococcus was the most common (25.7%), followed by Pseudomonas aeruginosa (23.4%), Staphylococcus aureus (11.0%), and Moraxella (7.8%). Fusarium was the most common fungal isolate (46.2%). The most common risk factors for infectious keratitis included contact lens wear (32.4%), underlying corneal disease (17.6%), trauma (14.3%), and ocular surface disease (13.7%). Conclusions: Bacteria are the most common cause of infectious keratitis in this patient population, with coagulase-negative Staphylococcus and Pseudomonas as the most common isolates. The prevalence of culture-positive fungal keratitis is significantly lower than that of bacterial keratitis. Contact lens wear is the most common risk factor associated with infectious keratitis in South Texas

Forward with Osmosis: Emerging Applications for Greater Sustainability

Many conventional practices in the production and use of water, energy, and food are unsustainable. Existing technologies and concepts can be improved with the integration of forward osmosis, a membrane-based technology that uses osmosis as its driving force. This Feature highlights five emerging applications of forward osmosis that elegantly bypass the difficult step of draw solution regeneration and make common processes more sustainable. These applications enhance the efficiency of the production and use of water, energy, and food; utilize wastes and abundant, low value resources; and better protect the environment