55 research outputs found
A decorated raven bone from the Zaskalnaya VI (Kolosovskaya) Neanderthal site, Crimea
We analyze a radius bone fragment of a raven (Corvus corax) from Zaskalnaya VI rock shelter, Crimea. The object bears seven notches and comes from an archaeological level attributed to a Micoquian industry dated to between 38 and 43 cal kyr BP. Our study aims to examine the degree of regularity and intentionality of this set of notches through their technological and morphometric analysis, complemented by comparative experimental work. Microscopic analysis of the notches indicate that they were produced by the to-and-fro movement of a lithic cutting edge and that two notches were added to fill in the gap left between previously cut notches, probably to increase the visual consistency of the pattern. Multivariate analysis of morphometric data recorded on the archaeological notches and sets of notches cut by nine modern experimenters on radii of domestic turkeys shows that the variations recorded on the Zaskalnaya set are comparable to experimental sets made with the aim of producing similar, parallel, equidistant notches. Identification of the Weber Fraction, the constant that accounts for error in human perception, for equidistant notches cut on bone rods and its application to the Zaskalnaya set of notches and thirty-six sets of notches incised on seventeen Upper Palaeolithic bone objects from seven sites indicate that the Zaskalnaya set falls within the range of variation of regularly spaced experimental and Upper Palaeolithic sets of notches. This suggests that even if the production of the notches may have had a utilitarian reason the notches were made with the goal of producing a visually consistent pattern. This object represents the first instance of a bird bone from a Neanderthal site bearing modifications that cannot be explained as the result of butchery activities and for which a symbolic argument can be built on direct rather than circumstantial evidence.EM201
Recommended from our members
Engineering current density over 5 kA mm-2 at 4.2 K, 14 T in thick film REBCO tapes
We report on remarkably high in-field performance at 4.2 K achieved in >4 μm thick rare earth barium copper oxide (REBCO) samples with Zr addition. Two different samples have been measured independently at Lawrence Berkeley National Laboratory and the National High Magnetic Field Laboratory, achieving critical current densities (J ) of 12.21 MA cm and 12.32 MA cm at 4.2 K, 14 T (), respectively, which corresponds to equivalent critical current (I ) values of 2247 and 2119 A/4 mm. These I values are about two times higher than the best reported performance of REBCO tapes to date and more than five times higher than the commercial HTS tapes reported in a recent study. The measured J values, with a pinning force of ∼1.7 T N m are almost identical to the highest value reported for thin (∼1 μm thick) REBCO at the field and temperature, but extended to very thick (>4 μm) films. This results in an engineering current density (J ) above 5 kA mm at 4.2 K, 14 T, which is more than five times higher than Nb Sn and nearly four times higher than the highest reported value of all superconductors other than REBCO at this field and temperature. The reported results have been achieved by utilizing an advanced metal organic chemical vapor deposition system. This study demonstrates the remarkable level of in-field performance achievable with REBCO conductors at 4.2 K and strong potential for high-field magnet applications. c c c c e 3 -2 -2 -3 -
Search for Decay in LSND
We observe a net beam-excess of (stat) (syst) events,
above 160 MeV, resulting from the charged-current reaction of
and/or on C and H in the LSND detector. No beam related muon
background is expected in this energy regime. Within an analysis framework of
, we set a direct upper limit for this
branching ratio of at 90% confidence level.Comment: 4 pages, 4 figure
Accelerator Magnet Development Based on COMB Technology with STAR Wires
This paper reports progress in the development of COMB magnet technology with
STAR wires. A two-layer dipole magnet with 60 mm clear bore has been recently
fabricated and tested in liquid nitrogen. The purpose of the test was to
determine what kind of critical current degradation occurs in the process of
winding the STAR wire into the COMB structure.Comment: CEC/ICMC2
Measurements of Charged Current Reactions of on
Charged Current reactions of on have been studied using a
decay-at-rest beam at the Los Alamos Neutron Science Center.
The cross section for the exclusive reaction
was measured to be cm. The observed
energy dependence of the cross section and angular distribution of the outgoing
electron agree well with theoretical expectations. Measurements are also
presented for inclusive transitions to excited states,
and compared with theoretical expectations. The
measured cross section, cm, is somewhat
lower than previous measurements and than a continuum random phase
approximation calculation. It is in better agreement with a recent shell model
calculation.Comment: 34 pages, 18 figures, accepted to PRC, replaced with the accepted on
Measurement of electron-neutrino electron elastic scattering
The cross section for the elastic scattering reaction nu_e+e- -> nu_e+e- was
measured by the Liquid Scintillator Neutrino Detector using a mu+ decay-at-rest
nu_e beam at the Los Alamos Neutron Science Center. The standard model of
electroweak physics predicts a large destructive interference between the
charge current and neutral current channels for this reaction. The measured
cross section, sigma_{nu_e e-}=[10.1 +- 1.1(stat.) +- 1.0(syst.)]x E_{nu_e}
(MeV) x 10^{-45} cm^2, agrees well with standard model expectations. The
measured value of the interference parameter, I=-1.01 +- 0.13(stat.) +-
0.12(syst.), is in good agreement with the standard model expectation of
I^{SM}=-1.09. Limits are placed on neutrino flavor-changing neutral currents.
An upper limit on the muon-neutrino magnetic moment of 6.8 x 10^{-10} mu_{Bohr}
is obtained using the nu_mu and \bar{nu}_mu fluxes from pi+ and mu+ decay.Comment: 22 pages, 11 figure
Analysis and optimization of propagation losses in LiNbO3 optical waveguides produced by swift heavy-ion irradiation
The propagation losses (PL) of lithium niobate optical planar waveguides fabricated by swift heavy-ion irradiation (SHI), an alternative to conventional ion implantation, have been investigated and optimized. For waveguide fabrication, congruently melting LiNbO3 substrates were irradiated with F ions at 20 MeV or 30 MeV and fluences in the range 1013–1014 cm−2. The influence of the temperature and time of post-irradiation annealing treatments has been systematically studied. Optimum propagation losses lower than 0.5 dB/cm have been obtained for both TE and TM modes, after a two-stage annealing treatment at 350 and 375∘C. Possible loss mechanisms are discussed
Evidence for Neutrino Oscillations from Muon Decay at Rest
A search for nu_bar_mu to nu_bar_e oscillations has been conducted at the Los
Alamos Meson Physics Facility using nu_bar_mu from mu+ decay at rest. The
nu_bar_e are detected via the reaction (nu_bar_e,p) -> (e+,n), correlated with
the 2.2 MeV gamma from (n,p) -> (d,gamma). The use of tight cuts to identify e+
events with correlated gamma rays yields 22 events with e+ energy between 36
and 60 MeV and only 4.6 (+/- 0.6) background events. The probability that this
excess is due entirely to a statistical fluctuation is 4.1E-08. A chi^2 fit to
the entire e+ sample results in a total excess of 51.8 (+18.7) (-16.9) (+/-
8.0) events with e+ energy between 20 and 60 MeV. If attributed to nu_bar_mu ->
nu_bar_e oscillations, this corresponds to an oscillation probability (averaged
over the experimental energy and spatial acceptance) of 0.0031 (+0.0011)
(-0.0010) (+/- 0.0005).Comment: 57 pages, 34 figures, revtex, additional information available at
http://nu1.lampf.lanl.gov/~lsnd
- …