Energy and economic analysis of a residential Solar Organic Rankine plant

To answer the actual energy, water, economic, social and environmental challenges, renewable, distributed power plants need to be developed. Among renewables, solar tri-generative power plants can be a solution where there is big low temperature heating/cooling demand and small electricity demand, like many residential and industrial utilities. In this case, solar thermal plants can produce thermal energy with low cost and high efficiency. The higher temperature heat not needed by the user can be exploited via Organic Rankine Cycle to produce electrical energy and desalinized water via reverse osmosis. The present paper analyses, via TRNSYS simulation, a system composed of 50 m2 of CPC solar thermal collectors, 3 m3 of thermal storage, a synthetic heat transfer fluid, 3 kWe ORC, 8 kWth absorber, 200 l/h direct reverse osmosis desalination device. The system is able to produce power, heating/cooling and fresh water needs for a residential house. Although system’s components are well known technologies, the integration to a efficient and economic working system is still a challenge. Global energy and economic analyses have been performed. Low temperature heating/cooling terminals allow to increase not only the use of thermal energy but also the ORCand absorber efficiency. ORC-Absorber configuration and relative fluids and temperatures are central. Government support and/or cost reduction of 30% are necessary to have positive NPV and acceptable PBT and IR

Experimental tests to recover the photovoltaic power by battery system

The uncertainty and variability of the Renewable Energy Sources (RES) power plants within the power grid is an open issue. The present study focuses on the use of batteries to overcome the limitations associated with the photovoltaic inverter operation, trying to maximize the global energy produced. A set of switches, was placed between a few photovoltaic modules and a commercial inverter, capable to change configuration of the plant dynamically. Such system stores the power that the inverter is not able to let into the grid inside batteries. At the base of this optimization, there is the achievement of two main configurations in which the batteries and the photovoltaic modules are electrically connected in an appropriate manner as a function of inverter efficiency and thus solar radiation. A control board and the relative program, to change the configuration, was designed and implemented, based on the value of the measured radiation, current, batteries voltage, and calculated inverter efficiency. Finally from the cost and impact analysis we can say that, today the technology of lithium batteries, for this application, is still too expensive in comparison with lead-acid batteries

Chemical composition of a sample of bright solar-metallicity stars

We present a detailed analysis of seven young stars observed with the spectrograph SOPHIE at the Observatoire de Haute-Provence for which the chemical composition was incomplete or absent in the literature. For five stars, we derived the stellar parameters and chemical compositions using our automatic pipeline optimized for F, G, and K stars, while for the other two stars with high rotational velocity, we derived the stellar parameters by using other information (parallax), and performed a line-by-line analysis. Chromospheric emission-line fluxes from CaII are obtained for all targets. The stellar parameters we derive are generally in good agreement with what is available in the literature. We provide a chemical analysis of two of the stars for the first time. The star HIP 80124 shows a strong Li feature at 670.8 nm implying a high lithium abundance. Its chemical pattern is not consistent with it being a solar sibling, as has been suggested.Comment: To be published on A

Abundances of lithium, oxygen, and sodium in the turn-off stars of Galactic globular cluster 47 Tuc

We aim to determine abundances of Li, O and Na in a sample of of 110 turn-off (TO) stars, in order to study the evolution of light elements in this cluster and to put our results in perspective with observations of other globular and open clusters, as well as with field stars. We use medium resolution spectra obtained with the GIRAFFE spectrograph at the ESO 8.2m Kueyen VLT telescope and use state of the art 1D model atmospheres and NLTE line transfer to determine the abundances. We also employ CO5BOLD hydrodynamical simulations to assess the impact of stellar granulation on the line formation and inferred abundances. Our results confirm the existence of Na-O abundance anti-correlation and hint towards a possible Li-O anti-correlation in the TO stars of 47 Tuc. We find no convincing evidence supporting the existence of Li-Na correlation. The obtained 3D NLTE mean lithium abundance in a sample of 94 TO stars where Li lines were detected reliably, $\langle A({\rm Li})_{\rm 3D~NLTE}\rangle = 1.78 \pm 0.18$ dex, appears to be significantly lower than what is observed in other globular clusters. At the same time, star-to-star spread in Li abundance is also larger than seen in other clusters. The highest Li abundance observed in 47 Tuc is about 0.1 dex lower than the lowest Li abundance observed among the un-depleted stars of the metal-poor open cluster NGC 2243. The lithium abundances in 47 Tuc, when put into context with observations in other clusters and field stars, suggest that stars that are more metal-rich than [FeH] \sim -1.0 experience significant lithium depletion during their lifetime on the main sequence, while the more metal-poor stars do not. Rather strikingly, our results suggest that initial lithium abundance with which the star was created may only depend on its age (the younger the star, the higher its Li content) and not on its metallicity.Comment: 24 pages, 13 figures; discussion and conclusions expanded. Accepted for publication in A&

A Double Main Sequence in the Globular Cluster NGC 6397

High-precision multi-band HST photometry reveals that the main sequence (MS) of the globular cluster NGC 6397 splits into two components, containing ~30% and ~70% of the stars. This double sequence is consistent with the idea that the cluster hosts two stellar populations: (i) a primordial population that has a composition similar to field stars, and containing ~30% of the stars, and (ii) a second generation with enhanced sodium and nitrogen, depleted carbon and oxygen, and a slightly enhanced helium abundance (Delta Y~0.01). We examine the color difference between the two sequences across a variety of color baselines and find that the second sequence is anomalously faint in m_F336W. Theoretical isochrones indicate that this could be due to NH depletion.Comment: 19 pages, 11 figures, accepted for pubblication in Ap

New ATLAS9 And MARCS Model Atmosphere Grids for the Apache Point Observatory Galactic Evolution Experiment (APOGEE)

We present a new grid of model photospheres for the SDSS-III/APOGEE survey of stellar populations of the Galaxy, calculated using the ATLAS9 and MARCS codes. New opacity distribution functions were generated to calculate ATLAS9 model photospheres. MARCS models were calculated based on opacity sampling techniques. The metallicity ([M/H]) spans from -5 to 1.5 for ATLAS and -2.5 to 0.5 for MARCS models. There are three main differences with respect to previous ATLAS9 model grids: a new corrected H2O linelist, a wide range of carbon ([C/M]) and alpha element [alpha/M] variations, and solar reference abundances from Asplund et al. 2005. The added range of varying carbon and alpha element abundances also extends the previously calculated MARCS model grids. Altogether 1980 chemical compositions were used for the ATLAS9 grid, and 175 for the MARCS grid. Over 808 thousand ATLAS9 models were computed spanning temperatures from 3500K to 30000K and log g from 0 to 5, where larger temperatures only have high gravities. The MARCS models span from 3500K to 5500K, and log g from 0 to 5. All model atmospheres are publically available online.Comment: 8 pages, 6 figures, 5 tables, accepted for publication in The Astronomical Journa

The SUMO project I. A survey of multiple populations in globular clusters

We present a general overview and the first results of the SUMO project (a SUrvey of Multiple pOpulations in Globular Clusters). The objective of this survey is the study of multiple stellar populations in the largest sample of globular clusters homogeneously analysed to date. To this aim we obtained high signal-to-noise (S/N>50) photometry for main sequence stars with mass down to ~0.5 M_SUN in a large sample of clusters using both archival and proprietary U, B, V, and I data from ground-based telescopes. In this paper, we focus on the occurrence of multiple stellar populations in twenty three clusters. We have defined a new photometric index cubi= (U-B)-(B-I), that turns out to be very effective for identifying multiple sequences along the red giant branch (RGB). We found that in the V-cubi diagram all clusters presented in this paper show broadened or multimodal RGBs, with the presence of two or more components. We found a direct connection with the chemical properties of different sequences, that display different abundances of light elements (O, Na, C, N, and Al). The cubi index is also a powerful tool to identify distinct sequences of stars along the horizontal branch and, for the first time in the case of NGC104 (47 Tuc), along the asymptotic giant branch. Our results demonstrate that i) the presence of more than two stellar populations is a common feature among globular clusters, as already highlighted in previous work; ii) multiple sequences with different chemical contents can be easily identified by using standard Johnson photometry obtained with ground-based facilities; iii) in the study of GC multiple stellar populations the cubi index is alternative to spectroscopy, and has the advantage of larger statistics.Comment: 23 pages, 20 figures, accepted for publication in MNRA