A Rough and Ready Galvanic Battery

n/

Missouri restricted use list

"This list is to be used for informational purposes only. These restricted use pesticides have been registered with the Missouri Department of Agriculture as of spring 1989. Pesticides frequently are added or removed from the list. There are other "restricted use" pesticides not listed here because the products containing those pesticides were not registered inf Missouri as of spring 1989. Our latest restricted use information is available electronically (updated periodically) over the Agricultural Electronic Bulletin Board, (314) 882-8289, Pest Management File Transfer List or Bulletins List. For further information contact your local University Extension office or Pesticide Coordinator, 45 Agriculture Building, University of Missouri-Columbia, 65211, 314/882-7871. The label on a pesticide is the last word on use and its classification as a "General'' or a "Restricted" use pesticide."--First page.James H. Jannan (Integrated Pest Management Fall, 1989)Revised 10/89/8

Testing and Maintenance in the Video Game Industry Today

Testing and maintenance are important when designing any type of software, especially video games. Since the gaming industry began, testing and maintenance techniques have evolved and changed. In order to understand how testing and maintenance techniques are practiced in the gaming industry, several key elements must be examined. First, specific testing and maintenance techniques that are most useful for video games must be analyzed to understand their effectiveness. Second, the processes used for testing and maintaining video games at the beginning of the industry must be reviewed in order to see how far testing and maintenance techniques have progressed. Third, the potential negative side effects of new testing and maintenance techniques need to be evaluated to serve as both a warning for future game developers and a way of improving the overall quality of current video games

Problems of perceptibility affecting formal design in Nontonal music

The thesis argues that the absence of traditional referential elements,-such as tonality and metre, affects the exactitude with which the listener perceives certain aspects of nontonal music. It claims that the listener might impose his own interpretation on a work in which the musical patterns are too complex to be perceived exactly and that, in extreme cases, the patterns which the listener reads into the music may be completely subjective. The thesis examines the extent to which Webern and some post-Webernian composers determine the listener's response to their music and shows that certain aspects of Webern's music are simple enough to be easily grasped and to be perceived exactly and that these aspects control the way in which the listener understands Webern's music. It suggests that the nature of the musical material and the procedures employed in much post-Webernian music precludes the use of many of the controls found in Webern, but that other methods of determining the listener's response to the music can be found in some of the works of the post-Webernian composers. It argues, however, that in some post-Webernian music, and particularly in that composed using chance or serial methods, the listener's response to the music may not be determined by the composer. The thesis claims' that many of the important formal problems facing post-Webernian music must be considered in relation to the problems of auditory perception

Charge-transfer heptamethine dyes for NIR singlet oxygen generation

A heptamethine-based charge-transfer dye was designed based on previous evidence of triplet state formation in orthogonal charge-transfer partners and calculations suggesting the formation of a charge-transfer state in heptamethine dye derivatives. An acridinium derivative of IR-1061 was subsequently synthesized and characterized, demonstrating photochemical reactivity at wavelengths over 1000 nm

Transformer Oil Passivation and Impact of Corrosive Sulphur

In recent years a significant volume of research has been undertaken in order to understand the recent failures in oil insulated power apparatus due to deposition of copper sulphide on the conductors and in the insulation paper. Dibenzyl Disulfide (DBDS) has been found to be the leading corrosive sulphur compound in the insulation oil [1]. The process of copper sulphide formation and the deposition in the paper is still being investigated, but a recently proposed method seems to be gaining some confidence [1]. This method suggests a two-step process; initially the DBDS and some oil soluble copper complexes are formed. Secondly the copper complexes are absorbed in the paper insulation, where they then decompose into copper sulphide [2]. The most commonly used mitigating technique for corrosive sulphur contaminated oil is passivation, normally using Irgamet 39 or 1, 2, 3-benzotriazole (BTA). The passivator is diluted into the oil to a concentration of around 100ppm, where it then reacts with the copper conductors to form a complex layer around the copper, preventing it from interacting with DBDS compounds and forming copper sulphide. This research project will investigate the electrical properties of HV transformers which have tested positive for corrosive sulphur, and the evolution of those properties as the asset degrades due to sulphur corrosion. Parallel to this the long term properties of transformers with passivated insulation oil will be analysed in order to understand the passivator stability and whether it is necessary to keep adding the passivator to sustain its performance. Condition monitoring techniques under investigation will include dielectric spectroscopy, frequency response analysis, recovery voltage method (aka interfacial polarisation) amongst others. Partial discharge techniques will not be investigated, as the voltage between the coil plates is low and therefore it will not contribute significantly to the overall insulation breakdown, in corrosive oil related faults [3]. The goal of this research is to establish key electrical properties in both passivated and non-passivated power transformers that demonstrate detectable changes as the equipment degrades due to the insulation oil being corrosive

Black dyes for coir fibre: 3 practical considerations

Earlier trials on Synacril Black A, Benzamin Black DS 167% and Suprexcel Black VY- three possible substitute dyes for Chlorazol Black E -showed the effect of variations in dyebath conditions on the amount of dye deposited on coir (Canning, A. J., Jarman, C. G. and Mykoluk, S. M. (1979) Black dyes for coir fibre. Part 2. Evaluation of selected dyes. Report of the Tropical Products Institute, L52). Further trials, in which both different concentrations of dye in the bath, and a standing bath were used, have now been carried out to obtain additional data on the exhaustion characteristics of the three dyes. Additionally, the effect of variations in dyebath conditions on the quality of colour, and the amount of each of the three dyes that needs to be deposited on to the fibre to produce an acceptable black, have been assessed. With all three dyes, dyebath exhaustion was approached more slowly with increased dyebath concentration. As a consequence, when additional dye is used, dyeing time must be increased to obtain the most efficient use of dye. Since the proportion of dye that exhausts from the bath is also reduced, particularly with the higher dyebath concentrations or the shorter dyeing times, increasingly large additions of dye are required in order to intensify the visual depth of shade. With low dyebath concentrations of the two direct dyes (Benzamin Black and Suprexcel Black), allowing the liquor to cool during dyeing could reduce heating costs since the exhaustion obtained after 1.5 hours at 95°C followed by cooling was similar to that obtained after 6 hours at 95°C. However, with deeper shades the opportunity for reducing heating costs by reducing dyeing time at 95°C and then cooling is less. The inclusion of sodium carbonate in the dyebath could also result in savings on dyestuff. When using a standing bath technique with Benzamin Black, significantly different exhaustion/time relationships were obtained with each batch of fibre. As a consequence there would be considerable practical difficulties in using this dye with this technique. On the other hand, the exhaustion of Suprexcel Black was only slightly affected by the use of replenished liquors and a standing bath technique could reduce costs. Because of its almost complete exhaustion, there would be no advantage in using a standing bath with the basic dye Synacril Black. All the dyes gave better light-fastness properties when they were concentrated at the periphery of the fibre rather than when they penetrated more deeply: however, staining of adjacent fabrics was greater. The distribution of the dye within the fibre did not affect the visual colour. All three dyes should produce black colours which are technically similar to those of commercial samples of black coir. The amounts which need to be deposited on the fibre to produce an acceptable black are estimated as approximately: Benzamin Black DS 167% - 19g per kilogram of fibre; Suprexcel Black VY - 22g per kilogram of fibre; Synacril Black A - 10g per kilogram of fibre. Fastness properties of the blacks vary with the dye and the technique used to apply it. Information on the development of optimum dyeing conditions is appended

A Dynamic Query-Rewriting Mechanism for Role-Based Access Control in Databases

Although Role-Based Access Control (RBAC) is a common security model currently, it has not been systematically applied in databases. In this paper, we propose a framework that enforces RBAC based on dynamic query rewriting. This framework grants privileges to data based on an intersection of roles, database structures, content, and privileges. All of this is implemented at the database level, which also offers a centralized location for administering security policies. We have implemented the framework within a healthcare setting