1,233 research outputs found
Carbonyl compounds in boreal coniferous forest air in Hyytiälä, Southern Finland
International audienceA variety of C1-C12 carbonyl compounds were measured in the air of a boreal coniferous forest located in Hyytiälä, Southern Finland. 24-h samples were collected during March and April in 2003 using DNPH (2,4-dinitrophenyl hydrazine) coated C18-cartridges and analyzed by liquid chromatography-mass spectrometry (LC-MS). Altogether 22 carbonyl compounds were quantified. The most abundant carbonyls were acetone (24-h average 1340 ng/m3), formaldehyde (480 ng/m3) and acetaldehyde (360 ng/m3). In contrast, scaling of concentrations against reactivity with the hydroxyl (OH) radical significantly increased the contribution of larger aldehydes and ketones (e.g. decanal, octanal and 6-methyl-5-hepten-2-one). Concentrations of monoterpene reaction products nopinone (9 ng/m3) and limona ketone (5 ng/m3) were low compared to the most abundant low molecular weight carbonyls. The total concentration of carbonyl compounds in Hyytiälä in April/March 2003 was much higher than the concentration of aromatic hydrocarbons and monoterpenes in April 2002. Lifetimes of the measured carbonyls with respect to reactions with OH radicals, ozone (O3), and nitrate (NO3) radicals as well as photolysis were estimated. The main sinks for most of the carbonyl compounds in Hyytiälä in springtime are expected to be reactions with the OH radical and photolysis. For 6-methyl-5-hepten-2-one and limona ketone also reactions with ozone are important. The sources of carbonyl compounds are presently highly uncertain. Due to the relatively short lifetimes of aldehydes and ketones, secondary biogenic and anthropogenic sources, that is oxidation of volatile organic compounds, and primary biogenic sources are expected to dominate in Hyytiälä
Overview of progress in European medium sized tokamaks towards an integrated plasma-edge/wall solution
Integrating the plasma core performance with an edge and scrape-off layer (SOL) that leads
to tolerable heat and particle loads on the wall is a major challenge. The new European
medium size tokamak task force (EU-MST) coordinates research on ASDEX Upgrade
(AUG), MAST and TCV. This multi-machine approach within EU-MST, covering a wide
parameter range, is instrumental to progress in the field, as ITER and DEMO core/pedestal
and SOL parameters are not achievable simultaneously in present day devices. A two prong
approach is adopted. On the one hand, scenarios with tolerable transient heat and particle
loads, including active edge localised mode (ELM) control are developed. On the other hand,
divertor solutions including advanced magnetic configurations are studied. Considerable
progress has been made on both approaches, in particular in the fields of: ELM control with
resonant magnetic perturbations (RMP), small ELM regimes, detachment onset and control,
as well as filamentary scrape-off-layer transport. For example full ELM suppression has now
been achieved on AUG at low collisionality with n = 2 RMP maintaining good confinement
HH(98,y2) 0.95. Advances have been made with respect to detachment onset and control.
Studies in advanced divertor configurations (Snowflake, Super-X and X-point target divertor)
shed new light on SOL physics. Cross field filamentary transport has been characterised in a
wide parameter regime on AUG, MAST and TCV progressing the theoretical and experimental
understanding crucial for predicting first wall loads in ITER and DEMO. Conditions in the
SOL also play a crucial role for ELM stability and access to small ELM regimes.European Commission (EUROfusion 633053
ELM-induced cold pulse propagation in ASDEX Upgrade
In ASDEX Upgrade, the propagation of cold pulses induced by type-I edge localized modes (ELMs) is studied using electron cyclotron emission measurements, in a dataset of plasmas with moderate triangularity. It is found that the edge safety factor or the plasma current are the main determining parameters for the inward penetration of the T-e perturbations. With increasing plasma current the ELM penetration is more shallow in spite of the stronger ELMs. Estimates of the heat pulse diffusivity show that the corresponding transport is too large to be representative of the inter-ELM phase. Ergodization of the plasma edge during ELMs is a possible explanation for the observed properties of the cold pulse propagation, which is qualitatively consistent with non-linear magneto-hydro-dynamic simulations.Peer reviewe
Diffractive shaping of excimer-laser beams for pulsed laser deposition
We present a beam-shaping system for a pulsed laser deposition setup. This system is based on two diffractive beam-splitter gratings and is able to produce 2*2-mm2 flat-top distributions of UV light with a fluence of 3 J/cm2 on the target some 30 cm behind the system. We have applied the setup to deposit ferromagnetic Ni-Mn-Ga films
Self-erasing and rewritable wettability patterns on ZnO thin films
Self-erasing patterns allow a substrate to be patterned multiple times or could store temporary information for secret communications, and are mostly based on photochromic molecules to change the color of the pattern. Herein we demonstrate self-erasing patterns of wettability on thin ZnO films made by atomic layer deposition. Hydrophilic patterns are written using UV light and decay spontaneously, i.e. become hydrophobic, or are erased aided by vacuum conditions or heat. We demonstrate that these patterns can be applied for channels to confine flow of water without physical walls.Peer reviewe
Ambient sesquiterpene concentration and its link to air ion measurements
International audienceAmbient air ion size distributions have been measured continuously at the Finnish boreal forest site in Hyytiälä since spring 2003. In general, these measurements show a maximum of air ions below 1.0 nm in diameter. But this physical characterization does not provide any information about the ion's chemical composition, which is one key question regarding the explanation of nucleation events observed. In this study we propose a link of the observed maximum of negative air ions between 0.56 and 0.75 nm to the so-called stabilised Criegee biradical, formed in the reaction of biogenic sesquiterpenes with ozone and predominantly destroyed by its reaction with ambient water vapour. Calculations of the electron and proton affinities of 120 kJ mol?1 (1.24 eV) and of 960 kJ mol?1 support this link. Other possible candidates such as sulphuric acid derived clusters are unable to explain the observations made. By using this approach, we are able to calculate the ambient concentration of sesquiterpenes at the air ion instrument inlet with a high time resolution on the daily and seasonal scale. The estimated concentration is found to reveal the same seasonal pattern as emission measurements conducted at shoot level. As expected for biogenic VOCs, the concentration is obtained highest during summer (maximum values of about 100 pptv) and smallest during winter (minimum less than 1 pptv). Because of the sesquiterpenes high reactivity and its low ambient concentrations, this approach can be a first step in understanding their emission and their impact on atmospheric chemistry in more detail. The findings presented are highly relevant for emission budgets too, since boreal forests are extended over large areas of the globe
ERO modelling of net and gross erosion of marker samples exposed to L-mode plasmas on ASDEX Upgrade
In this paper, we report experimental and numerical investigations of gross and net erosion of gold (Au) and molybdenum (Mo), proxies for the common plasma-facing material tungsten (W), during L-mode plasma discharges in deuterium (D) in the outer strike-point region of the ASDEX Upgrade tokamak. To this end, erosion profiles of different marker spots (for Au, dimensions 1 x 1 and 5 x 5 mm(2)) and marker coatings (for Mo) have been determined and modelled using the ERO code. The smaller marker spots were designed to quantify the gross-erosion rate while on the bigger markers local prompt re-deposition of Au allowed obtaining data on net erosion. The experimental results indicate relatively uniform erosion profiles across the marker spots or coatings, very little re-deposition elsewhere, and the largest erosion taking place close to the strike point. Compared to W, the markers show up to 15 times higher net erosion but no major differences in the poloidal migration lengths of Au and W can be seen. Gold thus appears to be a proper choice for studying migration of W in the divertor region. The ERO simulations with different background plasmas are able to reproduce the main features of the experimental net erosion profile of Au. Of the studied parameters, electron temperature has the strongest impact on erosion: doubling the temperature enhances erosion by a factor of 2.5-3. In contrast, for Mo, the simulated net erosion is similar to 3 times smaller than what experimental data indicate. The discrepancies can be attributed to the deviations of the background plasma profiles from the measured ones as well as to the applied models or approximations for the ion temperature, plasma potential, and sheath characteristics in ERO. In addition, the surrounding areas of the marker samples being covered with impurities and W from previous experiments may have considerably reduced the actual re-deposition of Mo. All the simulations predict a toroidal tail of re-deposited particles, downstream of the markers, but the particle density seems to be below the experimental detection threshold. The comparison between the 1 x 1 mm(2) and 5 x 5 mm(2) marker spots further reveal that re-deposition drops from >50% toPeer reviewe
LIBS applicability for investigation of re-deposition and fuel retention in tungsten coatings exposed to pure and nitrogen-mixed deuterium plasmas of Magnum-PSI
We have investigated the applicability of Laser Induced Breakdown Spectroscopy (LIBS) for analyzing the changes in the composition and fuel retention of W and W-Ta coatings following exposure to D2 or mixed D2-N2 plasma beams in the linear plasma device Magnum PSI. The exposed samples were characterized by in situ ns-LIBS and complementary analysis methods Secondary Ion Mass Spectroscopy, Energy Dispersive x-ray spectroscopy and Nuclear Reaction Analysis. In agreement with the used complementary analysis methods, LIBS revealed the formation of up to 400 nm thick co-deposited surface layer in the central region of the coatings which contained a higher concentration of the main plasma impurities, such as N, and metals, such as Ta and Mo, the latter originating mainly from the substrate and from the plasma source. The deuterium retention on the other hand was highest outside from the central region of the coatings.</p
Follow-up study of the effect of a three-month course of ciprofloxacin on the late prognosis of reactive arthritis
- …