27,674 research outputs found
Dynamic response and stability of a composite prop-fan model
Results are presented for blade response and stability during wind tunnel tests of a 62.2 cm diameter model of a prop-fan, advanced turboprop, with swept graphite/epoxy composite blades. Measurements of dynamic response were made with the rotor mounted on an isolated nacelle, with varying tilt for nonuniform inflow, at flow speeds from 0.36 to 0.9 Mach number. The blade displayed no instabilities over the operating range tested, up to 0.9 Mach number and 10,000 RPM. Measurements are compared with those for other prop-fan models of both solid metal and graphite composite construction. The swept composite blade had less response than an unswept composite blade. Composite blades had more response than metal blades. Measurements are compared with theoretically based predictions. The 1-P blade response was significantly overpredicted using unimproved methods and somewhat overpredicted using improved methods. Unexpectedly high 2-P strain levels were measured and suggest the presence of nonlinear effects on blade response
Applying inspection to object-oriented software
The benefits of the object-oriented paradigmare widely cited. At the same time, inspection is deemed to be the most cost-effective means of detecting defects in software products. Why then, is there no published experience, let alone quantitative data, on the application of inspection to object-oriented systems? We describe the facilities of the object-oriented paradigm and the issues that these raise when inspecting object-oriented code. Several problems are caused by the disparity between the static code structure and its dynamic runtime behaviour. The large number of small methods in object-oriented systems can also cause problems. We then go on to describe three areas which may help mitigate problems found. Firstly, the use of various programming methods may assist in making object-oriented code easier to inspect. Secondly, improved program documentation can help the inspector understand the code which is under inspection. Finally, tool support can help the inspector to analyse the dynamic behaviour of the code. We conclude that while both the object-oriented paradigm and inspection provide excellent benefits on their own, combining the two may be a difficult exercise, requiring extensive support if it is to be successful
Airfoil self-noise and prediction
A prediction method is developed for the self-generated noise of an airfoil blade encountering smooth flow. The prediction methods for the individual self-noise mechanisms are semiempirical and are based on previous theoretical studies and data obtained from tests of two- and three-dimensional airfoil blade sections. The self-noise mechanisms are due to specific boundary-layer phenomena, that is, the boundary-layer turbulence passing the trailing edge, separated-boundary-layer and stalled flow over an airfoil, vortex shedding due to laminar boundary layer instabilities, vortex shedding from blunt trailing edges, and the turbulent vortex flow existing near the tip of lifting blades. The predictions are compared successfully with published data from three self-noise studies of different airfoil shapes. An application of the prediction method is reported for a large scale-model helicopter rotor, and the predictions compared well with experimental broadband noise measurements. A computer code of the method is given
Lecture notes on sediment transportation and channel stability
These notes have been prepared for a series of lectures on
sediment transportation and channel stability given by the authors to a group of engineers and geologists of the U. S. Department of Agriculture assembled at Caltech on September 12-16,1960. The material herein is not intended to serve as a complete textbook, because it covers only subjects of the one-week sequence of lectures Due to limitation of space and time, coverage of many subjects is brief and others are omitted altogether. At the end of each chapter the reader will find a selected list of references for more detailed study
The Role of Cold Flows in the Assembly of Galaxy Disks
We use high resolution cosmological hydrodynamical simulations to demonstrate
that cold flow gas accretion, particularly along filaments, modifies the
standard picture of gas accretion and cooling onto galaxy disks. In the
standard picture, all gas is initially heated to the virial temperature of the
galaxy as it enters the virial radius. Low mass galaxies are instead dominated
by accretion of gas that stays well below the virial temperature, and even when
a hot halo is able to develop in more massive galaxies there exist dense
filaments that penetrate inside of the virial radius and deliver cold gas to
the central galaxy. For galaxies up to ~L*, this cold accretion gas is
responsible for the star formation in the disk at all times to the present.
Even for galaxies at higher masses, cold flows dominate the growth of the disk
at early times. Within this modified picture, galaxies are able to accrete a
large mass of cold gas, with lower initial gas temperatures leading to shorter
cooling times to reach the disk. Although star formation in the disk is
mitigated by supernovae feedback, the short cooling times allow for the growth
of stellar disks at higher redshifts than predicted by the standard model.Comment: accepted to Ap
Helicopter main-rotor noise: Determination of source contributions using scaled model data
Acoustic data from a test of a 40 percent model MBB BO-105 helicopter main rotor are scaled to equivalent full-scale flyover cases. The test was conducted in the anechoic open test section of the German-Dutch Windtunnel (DNW). The measured data are in the form of acoustic pressure time histories and spectra from two out-of-flow microphones underneath and foward of the model. These are scaled to correspond to measurements made at locations 150 m below the flight path of a full-scale rotor. For the scaled data, a detailed analysis is given for the identification in the data of the noise contributions from different rotor noise sources. Key results include a component breakdown of the noise contributions, in terms of noise criteria calculations of a weighted sound pressure level (dBA) and perceived noise level (PNL), as functions of rotor advance ratio and descent angle. It is shown for the scaled rotor that, during descent, impulsive blade-vortex interaction (BVI) noise is the dominant contributor to the noise. In level flight and mild climb, broadband blade-turbulent wake interaction (BWI) noise is dominant due to the absence of BVI activity. At high climb angles, BWI is reduced and self-noise from blade boundary-layer turbulence becomes the most prominent
Entanglement versus Quantum Discord in Two Coupled Double Quantum Dots
We study the dynamics of quantum correlations of two coupled double quantum
dots containing two excess electrons. The dissipation is included through the
contact with an oscillator bath. We solve the Redfield master equation in order
to determine the dynamics of the quantum discord and the entanglement of
formation. Based on our results, we find that the quantum discord is more
resistant to dissipation than the entanglement of formation for such a system.
We observe that this characteristic is related to whether the oscillator bath
is common to both qubits or not and to the form of the interaction Hamiltonian.
Moreover, our results show that the quantum discord might be finite even for
higher temperatures in the asymptotic limit.Comment: 14 pages, 8 figures (new version is the final version to appear in
NJP
Phenomenology of Dirac Neutrinogenesis in Split Supersymmetry
In Split Supersymmetry scenarios the possibility of having a very heavy
gravitino opens the door to alleviate or completely solve the worrisome
"gravitino problem'' in the context of supersymmetric baryogenesis models. Here
we assume that the gravitino may indeed be heavy and that Majorana masses for
neutrinos are forbidden as well as direct Higgs Yukawa couplings between left
and right handed neutrinos. We investigate the viability of the mechansim known
as Dirac leptogenesis (or neutrinogenesis), both in solving the baryogenesis
puzzle and explaining the observed neutrino sector phenomenology. To
successfully address these issues, the scenario requires the introduction of at
least two new heavy fields. If a hierarchy among these new fields is
introduced, and some reasonable stipulations are made on the couplings that
appear in the superpotential, it becomes a generic feature to obtain the
observed large lepton mixing angles. We show that in this case, it is possible
simultaneously to obtain both the correct neutrino phenomenology and enough
baryon number, making thermal Dirac neutrinogenesis viable. However, due to
cosmological constraints, its ability to satisfy these constraints depends
nontrivially on model parameters of the overall theory, particularly the
gravitino mass. Split supersymmetry with m_{3/2} between 10^{5} and 10^{10} GeV
emerges as a "natural habitat" for thermal Dirac neutrinogenesis.Comment: 37 pages, 8 figure
Medium Modifications of Hadron Properties and Partonic Processes
Chiral symmetry is one of the most fundamental symmetries in QCD. It is
closely connected to hadron properties in the nuclear medium via the reduction
of the quark condensate , manifesting the partial restoration of
chiral symmetry. To better understand this important issue, a number of
Jefferson Lab experiments over the past decade have focused on understanding
properties of mesons and nucleons in the nuclear medium, often benefiting from
the high polarization and luminosity of the CEBAF accelerator. In particular, a
novel, accurate, polarization transfer measurement technique revealed for the
first time a strong indication that the bound proton electromagnetic form
factors in 4He may be modified compared to those in the vacuum. Second, the
photoproduction of vector mesons on various nuclei has been measured via their
decay to e+e- to study possible in-medium effects on the properties of the rho
meson. In this experiment, no significant mass shift and some broadening
consistent with expected collisional broadening for the rho meson has been
observed, providing tight constraints on model calculations. Finally, processes
involving in-medium parton propagation have been studied. The medium
modifications of the quark fragmentation functions have been extracted with
much higher statistical accuracy than previously possible.Comment: to appear in J. Phys.: Conf. Proc. "New Insights into the Structure
of Matter: The First Decade of Science at Jefferson Lab", eds. D.
Higinbotham, W. Melnitchouk, A. Thomas; added reference
- …