1,467 research outputs found
Epoxy composites with covalently anchored amino-functionalized SWNTs: Towards the tailoring of physical properties through targeted functionalization
First published on the web August 24th, 2011Functionalization of single-walled carbon nanotubes (SWNTs) with covalently grafted amine moieties provides reactive fillers with potential for covalent anchoring to an epoxy matrix. Manufacturing and characterization of a high performance epoxy system reinforced with as-grown and aminated SWNTs are presented through four different approaches. Epoxy composite materials incorporating SWNTs aminated through sidewall addition reactions present enhanced mechanical, thermal and electrical properties, beyond the effect of unfunctionalized SWNTs. The functionalization pathways studied here lead to a composite with specific improvements in some of the physical properties of the epoxy matrix, which enables the tailored design of the composite's properties through functionalization. The amination via diazonium reaction with 4-aminobenzylamine is especially effective in enhancing the tensile and impact properties of the epoxy composites (44% improvement in impact strength at 0.1 wt% loading) and leads to the highest increase in elastic modulus reported so far for the integration of aminated nanotubes into epoxy resin. Composites incorporating aminated SWNTs throughout the 1,3-dipolar cycloaddition reaction stand out for their thermo-oxidative stability and thermomechanical properties. The incorporation of as-produced arc-discharge SWNTs into the TGAP/DDS epoxy matrix leads to composite materials with the highest electrical conductivity among all the studied samples. This journal is © The Royal Society of Chemistry.The present work was carried out with financial support from the NRC-CSIC collaboration project and fellowships from MICINN Spanish Ministry (FPU grant) and CAI-DGA and Europa XXI programmes. J.M.G.D. would like to thank Dr Benoit Simard and Dr Yadienka Martinez of SIMS-NRC for their close collaboration. Special thanks go to Prof. Maurizio Prato for kindly allowing a short research stay in his group, and his entire team. Epoxy reagents were received as a gift from Huntsman, which is gratefully acknowledged.Peer Reviewe
Epoxy composites with covalently anchored amino-functionalized SWNTs: Towards the tailoring of physical properties through targeted functionalization
Functionalization of single-walled carbon nanotubes (SWNTs) with covalently grafted amine moieties provides reactive fillers with potential for covalent anchoring to an epoxy matrix. Manufacturing and characterization of a high performance epoxy system reinforced with as-grown and aminated SWNTs are presented through four different approaches. Epoxy composite materials incorporating SWNTs aminated through sidewall addition reactions present enhanced mechanical, thermal and electrical properties, beyond the effect of unfunctionalized SWNTs. The functionalization pathways studied here lead to a composite with specific improvements in some of the physical properties of the epoxy matrix, which enables the tailored design of the composite's properties through functionalization. The amination via diazonium reaction with 4-aminobenzylamine is especially effective in enhancing the tensile and impact properties of the epoxy composites (44% improvement in impact strength at 0.1 wt% loading) and leads to the highest increase in elastic modulus reported so far for the integration of aminated nanotubes into epoxy resin. Composites incorporating aminated SWNTs throughout the 1,3-dipolar cycloaddition reaction stand out for their thermo-oxidative stability and thermomechanical properties. The incorporation of as-produced arc-discharge SWNTs into the TGAP/DDS epoxy matrix leads to composite materials with the highest electrical conductivity among all the studied samples. This journal is © The Royal Society of Chemistry.The present work was carried out with financial support from the NRC-CSIC collaboration project and fellowships from MICINN Spanish Ministry (FPU grant) and CAI-DGA and Europa XXI programmes. J.M.G.D. would like to thank Dr Benoit Simard and Dr Yadienka Martinez of SIMS-NRC for their close collaboration. Special thanks go to Prof. Maurizio Prato for kindly allowing a short research stay in his group, and his entire team. Epoxy reagents were received as a gift from Huntsman, which is gratefully acknowledged.Peer Reviewe
Clonal hematopoiesis is not prevalent in Hutchinson-Gilford progeria syndrome.
Clonal hematopoiesis of indeterminate potential (CHIP), defined as the presence of somatic mutations in cancer-related genes in blood cells in the absence of hematological cancer, has recently emerged as an important risk factor for several age-related conditions, especially cardiovascular disease. CHIP is strongly associated with normal aging, but its role in premature aging syndromes is unknown. Hutchinson-Gilford progeria syndrome (HGPS) is an ultra-rare genetic condition driven by the accumulation of a truncated form of the lamin A protein called progerin. HGPS patients exhibit several features of accelerated aging and typically die from cardiovascular complications in their early teens. Previous studies have shown normal hematological parameters in HGPS patients, except for elevated platelets, and low levels of lamin A expression in hematopoietic cells relative to other cell types in solid tissues, but the prevalence of CHIP in HGPS remains unexplored. To investigate the potential role of CHIP in HGPS, we performed high-sensitivity targeted sequencing of CHIP-related genes in blood DNA samples from a cohort of 47 HGPS patients. As a control, the same sequencing strategy was applied to blood DNA samples from middle-aged and elderly individuals, expected to exhibit a biological age and cardiovascular risk profile similar to HGPS patients. We found that CHIP is not prevalent in HGPS patients, in marked contrast to our observations in individuals who age normally. Thus, our study unveils a major difference between HGPS and normal aging and provides conclusive evidence that CHIP is not frequent in HGPS and, therefore, is unlikely to contribute to the pathophysiology of this accelerated aging syndrome.This work was supported by Fundación “la
Caixa” (grant number LCF/PR/HR17/52150007 to VF,
and JJF). JJF is supported by a Ramón y Cajal award (RYC2016–20026) from the Spanish Ministerio de Ciencia e
Innovación (MICIN)/Agencia Estatal de Investigación
(AEI)/10.13039/501100011033 and Fondo Social Europeo “El
FSE invierte en tu futuro”. VA’s lab is supported by MICIN/
AEI/10.13039/501100011033 and Fondo Social Europeo “El
FSE invierte en tu futuro” (grant number PID2019-108489RBI00), the Progeria Research Foundation (Award PRF 2019–77),
and a donation from Asociación Progeria Alexandra Peraut.
LBG is supported by The Progeria Research Foundation. MDD
is supported by a predoctoral FPI fellowship from the Spanish MICIN/AEI/10.13039/501100011033 and Fondo Social
Europeo “El FSE invierte en tu futuro” (PRE2019-087463),
and MA-P is supported by a predoctoral FPU contract from the
Ministerio de Educación, Cultura y Deporte (FPU18/02913).
The CNIC is supported by the MICIN, the Instituto de Salud
Carlos III, the Pro-CNIC Foundation, and is a Severo Ochoa
Center of Excellence (grant number CEX2020-001041-S
funded by MICIN/AEI/10.13039/501100011033).S
Hierarchical and hybrid polymer nanocomposites based on carbon nanotubes and inorganic fullerene type nanoparticles
The influence of singlewalled carbon nanotubes (SWCNT) and inorganic fullerenelike tungsten disulfide nanoparticles (IFWS2) on the morphology and thermal, mechanical and electrical performance of multifunctional fibrereinforced polymer composites has been investigated. Significant improvements were observed in stiffness, strength and toughness in poly (ether ether ketone) (PEEK) / (SWCNT) / glass fibre (GF) laminates when a compatibilizer was used for wrapping the CNTs. Hybrid poly(phenylene sulphide) (PPS)/IFWS2/ carbon fibre (CF) reinforced polymer composites showed improved mechanical and tribological properties attributed to a synergetic effect between the IF nanoparticles and CF
Sensory polymeric foams as a tool for improving sensing performance of sensory polymers
Microcellular sensory polymers prepared from solid sensory polymeric films were tested in an aqueous Hg(II) detection process to analyze their sensory behavior. First, solid acrylic-based polymeric films of 100 µm thickness were obtained via radical copolymerization process. Secondly, dithizone sensoring motifs were anchored in a simple five-step route, obtaining handleable colorimetric sensory films. To create the microporous structure, films were foamed in a ScCO2 batch process, carried out at 350 bar and 60 °C, resulting in homogeneous morphologies with cell sizes around 5 µm. The comparative behavior of the solid and foamed sensory films was tested in the detection of mercury in pure water media at 2.2 pH, resulting in a reduction of the response time (RT) around 25% and limits of detection and quantification (LOD and LOQ) four times lower when using foamed films, due to the increase of the specific surface associated to the microcellular structure.Fondo Europeo de Desarrollo Regional) and both the
Spanish Agencia Estatal de Investigación (MAT2017-84501-R) and the Consejeria de Educación-Junta de Castilla y
León (BU306P18
Opportunities and challenges in the use of inorganic fullerene-like nanoparticles to produce advanced polymer nanocomposites
Polymer/inorganic nanoparticle nanocomposites have garnered considerable academic and industrial interest over recent decades in the development of advanced materials for a wide range of applications. In this respect, the dispersion of so-called inorganic fullerene-like (IF) nanoparticles, e.g., tungsten disulfide (IF-WS2) or molybdenum disulfide (IF-MoS2), into polymeric matrices is emerging as a new strategy. The surprising properties of these layered metal dichalcogenides such as high impact resistance and superior tribological behavior, attributed to their nanoscale size and hollow quasi-spherical shape, open up a wide variety of opportunities for applications of these inorganic compounds. The present work presents a detailed overview on research in the area of IF-based polymer nanocomposites, with special emphasis on the use of IF-WS2 nanoparticles as environmentally friendly reinforcing fillers. The incorporation of IF particles has been shown to be efficient for improving thermal, mechanical and tribological properties of various thermoplastic polymers, such as polypropylene, nylon-6, poly(phenylene sulfide), poly(ether ether ketone), where nanocomposites were fabricated by simple melt-processing routes without the need for modifiers or surfactants. This new family of nanocomposites exhibits similar or enhanced performance when compared with nanocomposites that incorporate carbon nanotubes, carbon nanofibers or nanoclays, but are substantially more cost-effective, efficient and environmentally satisfactory. Most recently, innovative approaches have been described that exploit synergistic effects to produce new materials with enhanced properties, including the combined use of micro- and nanoparticles such as IF-WS2/nucleating agent or IF-WS2/carbon fiber, as well as dual nanoparticle systems such as SWCNT/IF-WS2 where each nanoparticle has different characteristics. The structure–property relationships of these nanocomposites are discussed and potential applications proposed ranging from medicine to the aerospace, automotive and electronics industries
Multiscale-fiber-reinforced thermoplastic composites incorporating carbon nanotubes: A review
This article reviews recent literature on hierarchical thermoplastic-based composites that simultaneously incorporate carbon nanotubes (CNTs) and conventional microscale fibers, and discusses the structure?property relationships of the resulting hybrids. The mixing of multiple and multiscale constituents enables the preparation of materials with new or improved properties due to synergistic effects. By exploiting the outstanding mechanical, thermal and electrical properties of CNTs, a new generation of multifunctional high-performance composites suitable for a wide variety of applications can be developed
Estudo da cinética de decomposição de compósitos nanoestruturados de poli (sulfeto de fenileno) reforçados com nanotubos de carbono
Cohort Profile: The epidemiology of chronic diseases and multimorbidity. The EpiChron cohort study
Why was the cohort set up?
Greater life expectancy in Europe over the past few decades has been translated into an increasing burden of chronic diseases that accumulate as the population ages, whereas acute infectious diseases have been progressively pushed into the background. The incidence of conditions such as hypertension, obesity and asthma has increased dramatically worldwide, and cancer, diabetes and respiratory and cardiovascular diseases are responsible for almost 70% of global deaths.
Concurrently, the prevalence of multimorbidity (as of people affected by more than one chronic disorder) is also increasing and appears as the most common chronic condition at present.
Multimorbidity affects almost 3 in 4 individuals aged 65 years and older, although it represents a problem not only for the elderly but also for adult and even young populations, at whom prevention strategies should aim. People affected by multimorbidity often experience fragmentation of care, greater and inadequate use of health services and polypharmacy, which in turn may increase the risk of low adherence and adverse drug reactions.
All of this leads to individuals’ quality of life deterioration and higher risk of mortality. Besides, handling patients with multimorbidity represents a daily challenge for physicians and health systems..
- …