Carbon monoxide oxidation rates computed for automobile thermal reactor conditions

Carbon monoxide oxidation rates in thermal reactors for exhaust manifolds are computed by integrating differential equations for system of twenty-nine reversible chemical reactions. Reactors are noncatalytic replacements for conventional exhaust manifolds and are a system for reducing carbon monoxide and hydrocarbons in automobile exhausts

Human sperm accumulation near surfaces: a simulation study

A hybrid boundary integral/slender body algorithm for modelling flagellar cell motility is presented. The algorithm uses the boundary element method to represent the ‘wedge-shaped’ head of the human sperm cell and a slender body theory representation of the flagellum. The head morphology is specified carefully due to its significant effect on the force and torque balance and hence movement of the free-swimming cell. The technique is used to investigate the mechanisms for the accumulation of human spermatozoa near surfaces. Sperm swimming in an infinite fluid, and near a plane boundary, with prescribed planar and three-dimensional flagellar waveforms are simulated. Both planar and ‘elliptical helicoid’ beating cells are predicted to accumulate at distances of approximately 8.5–22 μm from surfaces, for flagellar beating with angular wavenumber of 3π to 4π. Planar beating cells with wavenumber of approximately 2.4π or greater are predicted to accumulate at a finite distance, while cells with wavenumber of approximately 2π or less are predicted to escape from the surface, likely due to the breakdown of the stable swimming configuration. In the stable swimming trajectory the cell has a small angle of inclination away from the surface, no greater than approximately 0.5°. The trapping effect need not depend on specialized non-planar components of the flagellar beat but rather is a consequence of force and torque balance and the physical effect of the image systems in a no-slip plane boundary. The effect is relatively weak, so that a cell initially one body length from the surface and inclined at an angle of 4°–6° towards the surface will not be trapped but will rather be deflected from the surface. Cells performing rolling motility, where the flagellum sweeps out a ‘conical envelope’, are predicted to align with the surface provided that they approach with sufficiently steep angle. However simulation of cells swimming against a surface in such a configuration is not possible in the present framework. Simulated human sperm cells performing a planar beat with inclination between the beat plane and the plane-of-flattening of the head were not predicted to glide along surfaces, as has been observed in mouse sperm. Instead, cells initially with the head approximately 1.5–3 μm from the surface were predicted to turn away and escape. The simulation model was also used to examine rolling motility due to elliptical helicoid flagellar beating. The head was found to rotate by approximately 240° over one beat cycle and due to the time-varying torques associated with the flagellar beat was found to exhibit ‘looping’ as has been observed in cells swimming against coverslips

Shock tube measurements of growth constants in the branched chain formaldehyde-carbon monoxide-oxygen system

Exponential free radical growth constants were measured for formaldehyde carbon monoxide-oxygen systems by monitoring the growth of oxygen atom concentration as manifested by CO flame band emission. Data were obtained over the temperature range of 1200 to 2000 K. The data were analyzed using a formaldehyde oxidation mechanism involving 12 elementary reaction steps. The computed growth constants are roughly in accord with experimental values, but are much more temperature dependent. The data was also analyzed assuming formaldehyde is rapidly decomposed to carbon monoxide and hydrogen. Growth constants computed for the resulting carbon monoxide hydrogen oxygen mixtures have a temperature dependence similar to experiments; however, for most mixtures, the computed growth constants were larger than experimental values

Carbon monoxide oxidation rates computed for automobile exhaust manifold reactor conditions

Carbon monoxide oxidation rates for automobile exhaust manifold reactor condition

Observations on the nesting of the mallard (Anas platyrhynchos platyrhynchos).

http://deepblue.lib.umich.edu/bitstream/2027.42/51713/1/139.pd

Shock tube measurements of growth constants in the branched-chain ethane-carbon monoxide-oxygen system

Exponential free radical growth constants have been measured for ethane carbon monoxide oxygen mixtures by monitoring the growth of oxygen atom concentration as manifested by CO flame band emission. Data were obtained over the temperature range of 1200 to 1700 K. The data were analyzed using an ethane oxidation mechanism involving seven elementary reaction steps. Calculated growth constants were close to experimental values at lower temperatures, up to about 1400 K, but at higher temperatures computed growth constants were considerably smaller than experiment. In attempts to explain these results additional branching reactions were added to the mechanism. However, these additional reactions did not appreciably change calculated growth constants

Observations on one nest of the Red-eyed Vireo, (Vireo olivaceus).

http://deepblue.lib.umich.edu/bitstream/2027.42/51714/1/140.pd

Plant Microfossils of an Iowa Coal Deposit

Much work has been done with the microfossils of Quaternary peat and silt deposits in Europe and North America, but comparatively little has been done with plant microfossils in older carbonaceous deposits, and, as far as the authors are aware, no statistical study has been made of these in coal deposits. The present study was undertaken in an effort to test in the Iowa coal the statistical methods used by paleoecologists upon Quaternary peat deposits

Hydrodynamic propulsion of human sperm

The detailed fluid mechanics of sperm propulsion are fundamental to our understanding of reproduction. In this paper, we aim to model a human sperm swimming in a microscope slide chamber. We model the sperm itself by a distribution of regularized stokeslets over an ellipsoidal sperm head and along an infinitesimally thin flagellum. The slide chamber walls are modelled as parallel plates, also discretized by a distribution of regularized stokeslets. The sperm flagellar motion, used in our model, is obtained by digital microscopy of human sperm swimming in slide chambers. We compare the results of our simulation with previous numerical studies of flagellar propulsion, and compare our computations of sperm kinematics with those of the actual sperm measured by digital microscopy. We find that there is an excellent quantitative match of transverse and angular velocities between our simulations and experimental measurements of sperm. We also find a good qualitative match of longitudinal velocities and computed tracks with those measured in our experiment. Our computations of average sperm power consumption fall within the range obtained by other authors. We use the hydrodynamic model, and a prototype flagellar motion derived from experiment, as a predictive tool, and investigate how sperm kinematics are affected by changes to head morphology, as human sperm have large variability in head size and shape. Results are shown which indicate the increase in predicted straight-line velocity of the sperm as the head width is reduced and the increase in lateral movement as the head length is reduced. Predicted power consumption, however, shows a minimum close to the normal head aspect ratio

Using a Data-Driven Method of Accident Analysis: A Case Study of the Human Performance Reliability (HPR) Process

PresentationHuman error and its contribution to occupational accidents and incidents has received considerable research attention in recent years. However, more research is needed into the validity, practicality, and functionality of using data-driven accident/incident analysis methods to identify factors that contribute to incidents with the greatest frequency. This paper presents a case-study of one such method: Human Performance Reliability (HPR). Methods: The authors conducted approximately 30 HPR reviews to analyze incidents that occurred at a large refining company over a three year period. Through the HPR process, the authors identified the most common human errors, other contributing factors, and the controls (SOPs, processes, programs) that failed to prevent the accidents/incidents. Results: A Chi-Square Goodness-of-Fit test and post-hoc analysis of Standard Residuals on the human error frequencies revealed the most common human errors and contributing factors, while raw frequency counts showed the most commonly associated controls (see Tables 3-6). The Chi-Square statistic was X2 = 528.58, indicating that certain errors were contributing to incidents significantly more often than others. Discussion: Early evidence supports the notion that the HPR process is an effective tool for incident analysis and subsequent continuous improvement efforts in process safety