61 research outputs found

    医院门诊药房全自动整盒发药设备使用优劣势分析

    Get PDF
    目的提高全自动整盒发药设备在门诊药房的使用效果,为国内其他医院引进该设备提供参考。方法结合智能化门诊药房的实际工作和全自动整盒发药设备的运行情况,评价该设备使用的优劣势。结果与结论全自动整盒发药设备的引进,改变了药师的工作环境,规范了药品的使用管理,但仍需要通过规范操作来减少某些弊端,同时加强管理,促进设备的高效运作,使其发挥最大优势

    New method of variable excitation MFL testing under the condition of small magnetizing apparatus

    Get PDF
    为解决常规储罐和管道的漏磁检测(Mfl)方法中磁化器体积大、耗能多的缺点,提出了一种小型磁化器条件下的变励磁Mfl检测新方法。首先,分析了小磁化器条件下被测钢板磁化状态随外部励磁强度的变化特性,推导了偏置磁化条件下励磁通变化量与漏磁场变化率的关系模型;其次,根据所建立的关系模型,设计了一种新型变励磁Mfl检测探头,并给出变励磁Mfl法的系统实现方案;再次,结合实现方案,搭建了变励磁Mfl相应的实验平台;最后,在该平台上,开展了一系列的物理实验并对实验结果进行了深入讨论。实验结果表明,所提变励磁Mfl法无需对被测钢板进行局部饱和磁化,适合小型磁化器条件并具有较高的灵敏度。变励磁Mfl法为漏磁检测领域提供了一种新的检测思路。In the conventional method of magnetic flux leakage( MFL) testing,the magnetizer is in big volume and with more energy consumption.To solve the problem,a new method of variable excitation MFL testing under the condition of small magnetizer is proposed.First of all,the state of magnetized steel along with the change of the external excitation's intensity under the condition of small magnetizer is analyzed.Secondly,according to the established model,a new type of testing probe for the variable excitation of MFL is designed and a new implementation scheme is proposed.Furthermore,combining with the implementation scheme,an appropriate testing platform of the variable excitation MFL is set.Finally,a series of physical experiments on the platform are carried out and the results of the experiment were discussed.The experimental results show that the proposed method don't need to make local saturation magnetization of tested steel plate,which is suitable for the condition of small magnetizer with higher sensitivity.The new method provides a new testing idea for MFL testing field.国家自然科学基金(51177141); 中央高校基本科研业务项目(2010121041); 航空基金(2012ZD68003)资助项

    The Photoluminescence Properties of Self assembled and Nano sized Silicon Quantum Dots

    Get PDF
    【中文摘要】 用 Si H4 气体的减压 CVD法 ,在氧化硅以及石英基板上自然形成了高密度的 (~ 10 11cm-2 )纳米尺寸的半球状硅晶粒 (硅量子点 ) ,并且对其光学吸收和发光 (Photo- luminescence,PL)特性进行了评价。用表面热氧化了的硅量子点样品 ,在室温条件且在高于 1.2 e V以上的能量范围内观察到了 PL谱。随着量子点尺寸的减少 ,PL谱的光学吸收限移向高能方向。 PL谱的峰值能呈现大幅度的 (约 0 .9e V)斯塔克移动 ,并且 PL谱的强度几乎与温度无关 ,说明发光来自与局域能级相关联的发光和复合过程。 【英文摘要】 Using the low pressure CVD method with SiH 4 gas, we have accumulated the silicon quantum dots in self assembled and nano sized on a silica glass substrate. The optical absorption and photoluminescene spectra have been observed. With decreasing the size of silicon quantum dot, the limit of optical absorption shifts to higher energy. The intensity of photoluminescence spectrum is independent of temperature, which means that the photoluminesce...福建省自然基金资助项

    Experimental study on reperfusion of intraocular lens

    Get PDF
    作者简介: 祁明信, 男, 1945 年7 月 出生, 教授、主任医师、博士研究生 导师, 主要从事白内障的基础与临 床研究。联系电话: 0591-83570887; E-mail:qihuang@netease. com 通讯作者: 黄秀榕,E-mail:[email protected][中文文摘]目的开展晶状体再灌注的离体和动物实验研究,并对再灌注人工晶状体技术进行评价。方法采用新鲜离体幼兔眼、离体猪眼、新西兰白兔眼,应用自行研制的人工晶状体材料,进行以下实验:(1)体外固化实验;(2)晶状体前囊膜微型撕囊及其稳固性实验;(3)经微型前囊膜开口超声乳化吸出晶状体内容物实验;(4)活的新西兰白兔眼内人工晶状体再灌注实验。结果(1)按硅酮聚合物与固化剂50:1的比例可获得柔软、弹性好、固化时间短(完全固化时间为60min)的注入材料;(2)晶状体前囊膜1.8~2.0mm的连续环形撕囊口具有较好的稳定性,可经该微型开口吸出晶状体内容物并灌注材料;(3)超声能量18%、流量25mL·min-1、负压120mmHg(1kPa=7.5mmHg)为晶状体内容物经微型前囊膜开口吸出的最佳条件;(4)注入灌注材料后可形成由晶状体囊膜包裹的、置换原晶状体皮质和核的、新的再灌注人工晶状体。结论采用再灌注人工晶状体的方法可进行新型人工晶状体再灌注,可为治疗白内障和老视提供参考。[英文文摘]Objective To carry out the experimental study on reperfusion of intraocular lens(IOLs) in vitro or in animal,and to assess the technique of IOLs reperfusion.Methods The following experiments were performed by using self-developed materials in fresh rabbit eyes and pig eyes in vitro,as well as in eyes of alive New-Zea-land rabbits:(1)Solidification study of self-developed material in vitro;(2)Continuous circular capsulorhexis(CCC) in anterior capsule of lens and its stability;(3)Draw of lens contents via phaco through mini-CCC;(4)IOLs ref illing in the eyes of alive New-Zea land rabbits. Results(1) Thematerialwhich was soft, springy and short-term solidification(full solidification time was 60 minutes) were obtained in certain proportion of geland solidified agent(50:1) in vitro; ( 2)The CCC in anterior capsule of lens with 1.8-2.0 mm diameter had very good stability. The lens contents were drawn and the materialwere refilled through themini-CCC; (3) The best conditions of drawing out lens contents through m ini-CCC were phaco energy 18% , flow 25 mL·min- 1, and negative pressure 120 mmH g (1kPa=7.5 mmHg);(4) The new refilled IOLs, which were wrapped by capsule of lens and were replaced original cortex and nucleus of lens, were obtained after thematerial refillied. Conc lusion. New IOLs are refilled through this method, which can prov ide reference for the treatment of cataract and presbyopia.福建省科技三项费用;教育厅重点资助项目基金资助(编号:K98041

    科学基金助推中国科学院过程工程研究所跨越发展

    No full text
    中国科学院过程工程研究所(以下简称"过程所")前身是1958年成立的中国科学院化工冶金研究所。建国初期,研究所为我国的化工冶金事业发展做出了突出贡献。50多年来,研究范围逐步扩展到能源化工、生化工程、材料化工、资源/环境工程等领域,学科方向由"化工冶金"发展为"过程工程"。国家自然科学基金(以下简称"科学基金")是资助我国基础研究的重要渠道之一,它支持和吸引了广大科研工作者和海外学者对自然科学基础研究

    科学基金助推中国科学院过程工程研究所跨越发展

    No full text
    中国科学院过程工程研究所(以下简称&quot;过程所&quot;)前身是1958年成立的中国科学院化工冶金研究所。建国初期,研究所为我国的化工冶金事业发展做出了突出贡献。50多年来,研究范围逐步扩展到能源化工、生化工程、材料化工、资源/环境工程等领域,学科方向由&quot;化工冶金&quot;发展为&quot;过程工程&quot;。国家自然科学基金(以下简称&quot;科学基金&quot;)是资助我国基础研究的重要渠道之一,它支持和吸引了广大科研工作者和海外学者对自然科学基础研究的</p

    “十三五”期间科研院所科学基金管理工作探索

    No full text
    2016年6月14日,国家自然科学基金委员会正式发布《国家自然科学基金&quot;十三五&quot;发展规划》,明确了科学基金承担支持基础研究和前沿探索、培养人才和团队、推动学科交叉等重要职责。当前形势下如何更好地发挥科学基金的作用是科研管理人员面临的新挑战。本文通过分析自然科学基金&quot;十三五&quot;发展规划文件精神,探索&quot;十三五&quot;期间科研院所科学基金管理创新工作,以期准确把握未来发展方向,充分发挥科学基金对科研院所跨越发展的推动作用。</p

    一种可传输42个OAM模的光子晶体光纤

    No full text
    文章提出一种可以传输42个轨道角动量(OAM)模式的环形光子晶体光纤,该光纤由中心空气孔、环形高折射率层以及包层构成,其中包层是由方形空气孔与圆形空气孔共同组成。利用有限元法对其进行仿真分析,仿真结果表明,这种结构在1.55μm处可以将简并模间的有效折射率差提高到3.45×10-3,从而大大减小模式间的耦合,所有模式的色散值均较小,例如HE2,1模式的色散只有53.29ps/(nm·km)。此外,光能量主要集中在环形高折射率区域内,且环形区域大小可灵活设计

    改性膨润土研究进展

    No full text
    概述了天然膨润土的结构和性质,介绍了膨润土在煅烧改性、钠化改性、酸改性、插层改性、有机改性等方面的研究进展,提出了改性膨润土今后的研究方向

    用于电子束光刻胶PMMA的显影液及其配制方法

    No full text
    本发明公开了一种用于电子束光刻胶PMMA的显影液,该显影液是异丙醇、甲醇和去离子水的混合液,其中异丙醇、甲醇和去离子水的体积比为7∶2∶1。本发明同时公开了一种用于电子束光刻胶PMMA的显影液的配置方法,该方法包括:将异丙醇、甲醇和去离子水以一定的体积比混合;将异丙醇、甲醇和去离子水的混合液在常温下静置一段时间,使得溶液混合均匀。利用本发明,相比目前通用的定影液IPA,不需要IPA或者其他定影液定影就能很好的控制线条宽度以及粗糙度,能够显著降低成本
    corecore