5 research outputs found
Surface morphology of titanium nitride thin films synthesized by DC reactive magnetron sputtering
In this paper the influence of temperature on the 3-D surface morphology of titanium nitride (TiN) thin films synthesized by DC reactive magnetron sputtering has been analyzed. The 3-D morphology variation of TiN thin films grown on p-type Si (100) wafers was investigated at four different deposition temperatures (473 K, 573 K, 673 K, 773 K) in order to evaluate the relation among the 3-D micro-textured surfaces. The 3-D surface morphology of TiN thin films was characterized by means of atomic force microscopy (AFM) and fractal analysis applied to the AFM data. The 3-D surface morphology revealed the fractal geometry of TiN thin films at nanometer scale. The global scale properties of 3-D surface geometry were quantitatively estimated using the fractal dimensions D, determined by the morphological envelopes method. The fractal dimension D increased with the substrate temperature variation from 2.36 (at 473 K) to 2.66 (at 673 K) and then decreased to 2.33 (at 773 K). The fractal analysis in correlation with the averaged power spectral density (surface) yielded better quantitative results of morphological changes in the TiN thin films caused by substrate temperature variations, which were more precise, detailed, coherent and reproducible. It can be inferred that fractal analysis can be easily applied for the investigation of morphology evolution of different film/substrate interface phases obtained using different thin-film technologies
Analysis of normal human retinal vascular network architecture using multifractal geometry
AIM: To apply the multifractal analysis method as a quantitative approach to a comprehensive description of the microvascular network architecture of the normal human retina. METHODS: Fifty volunteers were enrolled in this study in the Ophthalmological Clinic of Cluj-Napoca, Romania, between January 2012 and January 2014. A set of 100 segmented and skeletonised human retinal images, corresponding to normal states of the retina were studied. An automatic unsupervised method for retinal vessel segmentation was applied before multifractal analysis. The multifractal analysis of digital retinal images was made with computer algorithms, applying the standard box-counting method. Statistical analyses were performed using the GraphPad InStat software. RESULTS: The architecture of normal human retinal microvascular network was able to be described using the multifractal geometry. The average of generalized dimensions (Dq) for q=0, 1, 2, the width of the multifractal spectrum (Δα=αmax - αmin) and the spectrum arms’ heights difference (│Δf│) of the normal images were expressed as mean±standard deviation (SD): for segmented versions, D0=1.7014±0.0057; D1=1.6507±0.0058; D2=1.5772±0.0059; Δα=0.92441±0.0085; │Δf│= 0.1453±0.0051; for skeletonised versions, D0=1.6303±0.0051; D1=1.6012±0.0059; D2=1.5531± 0.0058; Δα=0.65032±0.0162; │Δf│= 0.0238±0.0161. The average of generalized dimensions (Dq) for q=0, 1, 2, the width of the multifractal spectrum (Δα) and the spectrum arms’ heights difference (│Δf│) of the segmented versions was slightly greater than the skeletonised versions. CONCLUSION: The multifractal analysis of fundus photographs may be used as a quantitative parameter for the evaluation of the complex three-dimensional structure of the retinal microvasculature as a potential marker for early detection of topological changes associated with retinal diseases
Diamond nanocrystal thin films : case study on surface texture and power spectral density properties
Analyzing diamond nanocrystal (DNC) thin film morphology produced by the HFCVD technique is the main objective of the present work. Stereometric analysis of three-dimensional surface microtextures was carried out based on data obtained through atomic force microscopy (AFM), while the ISO 25178-2:2012 standard was applied to characterize surface topography. The Abbott–Firestone curve, peak count histograms, and Cartesian graphs, which were extracted through AFM images, gave valuable statistical information. As can be seen, the most isotropic sample was the Au catalyst (etched) deposited by the hot filament chemical vapor deposition method. Moreover, by increasing the time of DNC growth from 15 min to 60 min, the surface roughness was increased. In addition, the average power spectral density was calculated and furrows were determined for all samples.https://aip.scitation.org/journal/advhj2020Physic