Computational Modeling of Vehicle Radiators Using Porous Medium Approach

A common tool for the determination of thermal characteristics of vehicle radiators is the experimental testing. However, experimental testing may not be feasible considering the cost and labor-time. Basic understanding of the past experimental data and analytical/computational modeling can significantly enhance the effectiveness of the design and development phase. One such computational modeling technique is the utilization of computational fluid dynamics (CFD) analysis to predict the thermal characteristics of a vehicle radiator. However, CFD models are also not suitable to be used as a design tool since considerable amount of computational power and time is required due to the multiple length scales involved in the problem, especially the small-scale geometric details associated with the fins. Although fins introduce a significant complexity for the problem, the repetitive and/or regular structure of the fins enables the porous medium based modeling. By porous modeling, a memory and time efficient computational model can be developed and implemented as an efficient design tool for radiators. In this work, a computational methodology is described to obtain the hydrodynamic and thermal characteristics of a vehicle radiator. Although the proposed methodology is discussed in the context of a vehicle radiator, the proposed methodology can be implemented to any compact heat exchanger with repetitive fin structures which is an important problem for many industrial applications

Measuring the effects of service value on behavioral intentions with a structural equation model

Son günlerde benzer hizmetleri, benzer fiyatlara sunabilen hizmet sektörü firmaları için ayırt edici özellik, sundukları yüksek hizmet değeridir. Hizmet firmalarının rakipleri arasında öne çıkmaları ancak müşterilerine sunacakları yüksek değerde hizmet ile mümkün olabilmektedir. Bu çalışma sağlık sektöründe hizmet veren hastanelerde hizmet değerinin müşterilerin gelecekteki davranışları üzerindeki etkisinin ölçülmesine yönelik Cronin ve diğerleri (2000) tarafından ortaya konan modelin bir parçasını içermektedir. Model, kayıp, hizmet değeri ve davranışsal niyet değişkenlerinden oluşan yapısal eşitlik modelidir. Araştırma modeli sağlık sektörüne uygulanarak, model değişkenleri arasındaki ilişkiler SPSS 13.0 ve LISREL 8.8 paket programları ile çözülmüş, ilgili sonuçlar elde edilmiştir.In last few years, high service value has become a distinguishable characteristic for firms which provide similar services with similar prices. If the firms provide the services with high service value, then they can be the leader among their rivals. In this paper, a part of Cronin et. al’s (2000) model is used and the effects of service value on behavioral intentions have been analyzed. The model is a structural equation model with three variables which are sacrifice, service value, and behavioral intention. For analyses SPSS 13.0 and LISREL 8.8 programs were used

Multipole analysis of spin observables in vector meson photoproduction

A multipole analysis of vector meson photoproduction is formulated as a generalization of the pseudoscalar meson case. Expansion of spin observables in the multipole basis and behavior of these observables near threshold and resonances are examined.Comment: 15 pages, latex, 2 figure

The quest for axions and other new light particles

Standard Model extensions often predict low-mass and very weakly interacting particles, such as the axion. A number of small-scale experiments at the intensity/precision frontier are actively searching for these elusive particles, complementing searches for physics beyond the Standard Model at colliders. Whilst a next generation of experiments will give access to a huge unexplored parameter space, a discovery would have a tremendous impact on our understanding of fundamental physics

Impact of the relatively light fourth family neutrino on the Higgs boson search

The existence of a fourth fermion generation has mostly been considered as a source of enhanced Higgs signals with respect to the 3 family Standard Model predictions. However, a fourth Standard Model family neutrino could cause the opposite situation. It is shown that relatively light fourth family neutrino (2m_(nu_(4))<m_(H)) could drastically change the interpretation of the search results for the Higgs boson, especially if m_(H)<170 GeV.Comment: 5 pages, 9 figure

Detail investigation of thermoelectric performance and magnetic properties of Cs-doped Bi2Sr2Co2Oy ceramic materials

Bi2Sr2-xCsxCo2Oy materials with 0 = x = 0.15, have been fabricated via the classical ceramic technique. XRD results have indicated that undoped and Cs-substituted samples are composed of Bi2Sr2Co2Oy phase as the major one. Microstructural studies have demonstrated the formation of a liquid phase, which allows a drastic grain growth. This factor is responsible for a drastic improvement of relative density, reaching about 95% of the theoretical one for 0.125 Cs content. On the other hand, electrical resistivity has been reduced up to 14 mO cm at 650 °C for 0.125 Cs content, around 40% lower than the obtained in undoped samples. As a consequence, Seebeck coefficient has been decreased due to the raise in charge carrier concentration. The highest power factor at 650 °C (0.21 mW/K2 m) has been found for 0.125 Cs substituted sample, about 40% larger than the obtained in undoped samples, and very similar to the notified in single crystals (0.26 mW/K2 m). Magnetisation with respect to temperature results have demonstrated that measured samples have a paramagnetic property above 50 K, except 0.10 Cs. Magnetic hysteresis curves have shown that the slopes and the magnitudes have increased with decreasing temperature

Drastic microstructural modification of Bi2Ca2Co2Oy ceramics by Na doping and laser texturing

Bi2Ca2-xNaxCo2Oy materials with x = 0 = x = 0.125, have been prepared either by sintering through the classical ceramic method, or textured using the laser floating zone technique. XRD results have shown that Bi2Ca2Co2Oy phase is the major one, independently of the Na content, in both kind of samples. SEM studies have shown a drastic microstructural modification between sintered and laser-textured materials. Na-doping increases density and grain sizes in sintered materials, while it enhances grain alignment in laser-grown materials. Moreover, it decreases secondary phase content in all cases. Electrical resistivity is also drastically reduced through texturing, when compared to the sintered samples, and Na-doping further decreases it. The lowest values determined in the laser-textured samples (26 mO cm at 650 °C) are around 40% lower than the best in sintered materials. On the other hand, S has been only slightly affected for Na-doping or processing method for all samples. Consequently, the highest power factor at 650 °C (0.18 mW/K2 m) has been obtained in laser-grown 0.075Na-doped samples, which is around 20 and 70% higher than the measured in undoped laser-textured samples, and sintered ones, respectively. Se han preparado materiales de composición Bi2Ca2-xNaxCo2Oy, con x = 0 ≤ x ≤ 0,125, por el método de estado sólido, además de texturarlos mediante la técnica de zona flotante inducida por láser. Los resultados de XRD han mostrado que la fase Bi2Ca2Co2Oy aparece como la mayoriraria, independientemente del contenido de Na, en ambos tipos de muestras. Los estudios SEM han encontrado una drástica modificación microestructural entre materiales sinterizados y texturados. El dopado con Na aumenta la densidad y el tamaño de grano en materiales sinterizados, mientras que mejora la orientación de los granos en materiales texturados. Además, disminuye el contenido de fases secundarias en todos los casos. La resistividad eléctrica disminuye drásticamente con el texturado, en comparación con las muestras sinterizadas, mientras que el dopado con Na la disminuye aún más. Los valores más bajos determinados en muestras texturadas (26 mΩ cm a 650 °C) son alrededor del 40% menor que los mejores datos publicados en materiales sinterizados. Por otro lado, S solo se ha visto afectado levemente, tanto por el dopado como por el método de procesado. En consecuencia, el máximo factor de potencia a 650 °C (0,18 mW/K2 m) se ha obtenido en muestras dopadas con 0,075 Na y texturadas, que es alrededor de un 20 a un 70% superior al medido en muestras texturadas sin dopar y sinterizadas, respectivamente