Insights into the Design of Congestion Control Protocols for Multi-Hop Wireless Mesh Networks

The widespread deployment of multi-hop wireless mesh networks will depend on the performance seen by the user. Unfortunately, the most predominant transport protocol, TCP, performs poorly over such networks, even leading to starvation in some topologies. In this work, we characterize the root causes of starvation in 802.11 scheduled multi-hop wireless networks via simulations. We analyze the performance of three categories of transport protocols. (1) end-to-end protocols that require implicit feedback (TCP SACK), (2) Explicit feedback based protocols (XCP and VCP) and (3) Open-loop protocol (UDP). We ask and answer the following questions in relation to these protocols: (a) Why does starvation occur in different topologies? Is it intrinsic to TCP or, in general, to feedback-based protocols? or does it also occur in the case of open-loop transfers such as CBR over UDP? (a) What is the role of application behavior on transport layer performance in multi-hop wireless mesh networks? (b) Is sharing congestion in the wireless neighborhood essential for avoiding starvation? (c) For explicit feedback based transport protocols, such as XCP and VCP, what performance can be expected when their capacity estimate is inaccurate? Based on the insights derived from the above analysis, we design a rate-based protocol called VRate that uses the two ECN bits for conveying load feedback information. VRate achieves near optimal rates when configured with the correct capacity estimate

PACE: Simple Multi-hop Scheduling for Single-radio 802.11-based Stub Wireless Mesh Networks

IEEE 802.11-based Stub Wireless Mesh Networks (WMNs) are a cost-effective and flexible solution to extend wired network infrastructures. Yet, they suffer from two major problems: inefficiency and unfairness. A number of approaches have been proposed to tackle these problems, but they are too restrictive, highly complex, or require time synchronization and modifications to the IEEE 802.11 MAC. PACE is a simple multi-hop scheduling mechanism for Stub WMNs overlaid on the IEEE 802.11 MAC that jointly addresses the inefficiency and unfairness problems. It limits transmissions to a single mesh node at each time and ensures that each node has the opportunity to transmit a packet in each network-wide transmission round. Simulation results demonstrate that PACE can achieve optimal network capacity utilization and greatly outperforms state of the art CSMA/CA-based solutions as far as goodput, delay, and fairness are concerned

Towards a System Theoretic Approach to Wireless Network Capacity in Finite Time and Space

In asymptotic regimes, both in time and space (network size), the derivation of network capacity results is grossly simplified by brushing aside queueing behavior in non-Jackson networks. This simplifying double-limit model, however, lends itself to conservative numerical results in finite regimes. To properly account for queueing behavior beyond a simple calculus based on average rates, we advocate a system theoretic methodology for the capacity problem in finite time and space regimes. This methodology also accounts for spatial correlations arising in networks with CSMA/CA scheduling and it delivers rigorous closed-form capacity results in terms of probability distributions. Unlike numerous existing asymptotic results, subject to anecdotal practical concerns, our transient one can be used in practical settings: for example, to compute the time scales at which multi-hop routing is more advantageous than single-hop routing

On the Catalyzing Effect of Randomness on the Per-Flow Throughput in Wireless Networks

This paper investigates the throughput capacity of a flow crossing a multi-hop wireless network, whose geometry is characterized by general randomness laws including Uniform, Poisson, Heavy-Tailed distributions for both the nodes' densities and the number of hops. The key contribution is to demonstrate \textit{how} the \textit{per-flow throughput} depends on the distribution of 1) the number of nodes $N_j$ inside hops' interference sets, 2) the number of hops $K$, and 3) the degree of spatial correlations. The randomness in both $N_j$'s and $K$ is advantageous, i.e., it can yield larger scalings (as large as $\Theta(n)$) than in non-random settings. An interesting consequence is that the per-flow capacity can exhibit the opposite behavior to the network capacity, which was shown to suffer from a logarithmic decrease in the presence of randomness. In turn, spatial correlations along the end-to-end path are detrimental by a logarithmic term

Statistical Delay Bound for WirelessHART Networks

In this paper we provide a performance analysis framework for wireless industrial networks by deriving a service curve and a bound on the delay violation probability. For this purpose we use the (min,x) stochastic network calculus as well as a recently presented recursive formula for an end-to-end delay bound of wireless heterogeneous networks. The derived results are mapped to WirelessHART networks used in process automation and were validated via simulations. In addition to WirelessHART, our results can be applied to any wireless network whose physical layer conforms the IEEE 802.15.4 standard, while its MAC protocol incorporates TDMA and channel hopping, like e.g. ISA100.11a or TSCH-based networks. The provided delay analysis is especially useful during the network design phase, offering further research potential towards optimal routing and power management in QoS-constrained wireless industrial networks.Comment: Accepted at PE-WASUN 201

Dynamic Queue Utilization Based MAC for multi-hop Ad Hoc networks

The end-to-end throughput in single flow multi-hop Ad Hoc networks decays rapidly with path length. Along the path, the success rate of delivering packets towards the destination decreases due to higher contention, interference, limited buffer size and limited shared bandwidth constraints. In such environments the queues fill up faster in nodes closer to the source than in the nodes nearer the destination. In order to reduce buffer overflow and improve throughput for a saturated network, this paper introduces a new MAC protocol named Dynamic Queue Utilization Based Medium Access Control (DQUB-MAC). The protocol aims to prioritise access to the channel for queues with higher utilization and helps in achieving higher throughput by rapidly draining packets towards the destination. The proposed MAC enhances the performance of an end-to-end data flow by up to 30% for a six hop transmission in a chain topology and is demonstrated to remain competitive for other network topologies and for a variety of packet sizes