Development of Economic Water Usage Sensor and Cyber-Physical Systems Co-Simulation Platform for Home Energy Saving

In this thesis, two Cyber-Physical Systems (CPS) approaches were considered to reduce residential building energy consumption. First, a flow sensor was developed for residential gas and electric storage water heaters. The sensor utilizes unique temperature changes of tank inlet and outlet pipes upon water draw to provide occupant hot water usage. Post processing of measured pipe temperature data was able to detect water draw events. Conservation of energy was applied to heater pipes to determine relative internal water flow rate based on transient temperature measurements. Correlations between calculated flow and actual flow were significant at a 95% confidence level. Using this methodology, a CPS water heater controller can activate existing residential storage water heaters according to occupant hot water demand. The second CPS approach integrated an open-source building simulation tool, EnergyPlus, into a CPS simulation platform developed by the National Institute of Standards and Technology (NIST). The NIST platform utilizes the High Level Architecture (HLA) co-simulation protocol for logical timing control and data communication. By modifying existing EnergyPlus co-simulation capabilities, NIST’s open-source platform was able to execute an uninterrupted simulation between a residential house in EnergyPlus and an externally connected thermostat controller. The developed EnergyPlus wrapper for HLA co-simulation can allow active replacement of traditional real-time data collection for building CPS development. As such, occupant sensors and simple home CPS product can allow greater residential participation in energy saving practices, saving up to 33% on home energy consumption nationally

An Open Source Cyberinfrastructure for Collecting, Processing, Storing and Accessing High Temporal Resolution Residential Water Use Data

Collecting and managing high temporal resolution residential water use data is challenging due to cost and technical requirements associated with the volume and velocity of data collected. We developed an open-source, modular, generalized architecture called Cyberinfrastructure for Intelligent Water Supply (CIWS) to automate the process from data collection to analysis and presentation of high temporal residential water use data. A prototype implementation was built using existing open-source technologies, including smart meters, databases, and services. Two case studies were selected to test functionalities of CIWS, including push and pull data models within single family and multi-unit residential contexts, respectively. CIWS was tested for scalability and performance within our design constraints and proved to be effective within both case studies. All CIWS elements and the case study data described are freely available for re-use

Advancing Data Collection, Management, and Analysis for Quantifying Residential Water Use via Low Cost, Open Source, Smart Metering Infrastructure

Urbanization, climate change, aging infrastructure, and the cost of delivering water to residential customers make it vital that we achieve a higher efficiency in the management of urban water resources. Understanding how water is used at the household level is vital for this objective.Water meters measure water use for billing purposes, commonly at a monthly, or coarser temporal resolutions. This is insufficient to understand where water is used (i.e., the distribution of water use across different fixtures like toilets, showers, outdoor irrigation), when water is used (i.e., identifying peaks of consumption, instantaneous or at hourly, daily, weekly intervals), the efficiency of water using fixtures, or water use behaviors across different households. Most smart meters available today are not capable of collecting data at the temporal resolutions needed to fully characterize residential water use, and managing this data represents a challenge given the rapidly increasing volume of data generated. The research in this dissertation presents low cost, open source cyberinfrastructure (datalogging and data management systems) to collect and manage high temporal resolution, residential water use data. Performance testing of the cyberinfrastructure demonstrated the scalability of the system to multiple hundreds of simultaneous data collection devices. Using this cyberinfrastructure, we conducted a case study application in the cities of Logan and Providence, Utah where we found significant variability in the temporal distribution, timing, and volumes of indoor water use. This variability can impact the design of water conservation programs, estimations and forecast of water demand, and sizing of future water infrastructure. Outdoor water use was the largest component of residential water use, yet homeowners were not significantly overwatering their landscapes. Opportunities to improve the efficiency of water using fixtures and to conserve water by promoting behavior changes exist among participants

ARCHITECTURE FOR A CBM+ AND PHM CENTRIC DIGITAL TWIN FOR WARFARE SYSTEMS

The Department of the Navy’s continued progression from time-based maintenance into condition-based maintenance plus (CBM+) shows the importance of increasing operational availability (Ao) across fleet weapon systems. This capstone uses the concept of digital efficiency from a digital twin (DT) combined with a three-dimensional (3D) direct metal laser melting printer as the physical host on board a surface vessel. The DT provides an agnostic conduit for combining model-based systems engineering with a digital analysis for real-time prognostic health monitoring while improving predictive maintenance. With the DT at the forefront of prioritized research and development, the 3D printer combines the value of additive manufacturing with complex systems in dynamic shipboard environments. To demonstrate that the DT possesses parallel abilities for improving both the physical host’s Ao and end-goal mission, this capstone develops a DT architecture and a high-level model. The model focuses on specific printer components (deionized [DI] water level, DI water conductivity, air filters, and laser motor drive system) to demonstrate the DT’s inherent effectiveness towards CBM+. To embody the system of systems analysis for printer suitability and performance, more components should be evaluated and combined with the ship’s environment data. Additionally, this capstone recommends the use of DTs as a nexus into more complex weapon systems while using a deeper level of design of experiment.Outstanding ThesisCivilian, Department of the NavyCommander, United States NavyCivilian, Department of the NavyCivilian, Department of the NavyCivilian, Department of the NavyCivilian, Department of the NavyCivilian, Department of the NavyCivilian, Department of the NavyApproved for public release. Distribution is unlimited

Distributed Database Management Techniques for Wireless Sensor Networks

Authors and/or their employers shall have the right to post the accepted version of IEEE-copyrighted articles on their own personal servers or the servers of their institutions or employers without permission from IEEE, provided that the posted version includes a prominently displayed IEEE copyright notice and, when published, a full citation to the original IEEE publication, including a link to the article abstract in IEEE Xplore. Authors shall not post the final, published versions of their papers.In sensor networks, the large amount of data generated by sensors greatly influences the lifetime of the network. In order to manage this amount of sensed data in an energy-efficient way, new methods of storage and data query are needed. In this way, the distributed database approach for sensor networks is proved as one of the most energy-efficient data storage and query techniques. This paper surveys the state of the art of the techniques used to manage data and queries in wireless sensor networks based on the distributed paradigm. A classification of these techniques is also proposed. The goal of this work is not only to present how data and query management techniques have advanced nowadays, but also show their benefits and drawbacks, and to identify open issues providing guidelines for further contributions in this type of distributed architectures.This work was partially supported by the Instituto de Telcomunicacoes, Next Generation Networks and Applications Group (NetGNA), Portugal, by the Ministerio de Ciencia e Innovacion, through the Plan Nacional de I+D+i 2008-2011 in the Subprograma de Proyectos de Investigacion Fundamental, project TEC2011-27516, by the Polytechnic University of Valencia, though the PAID-05-12 multidisciplinary projects, by Government of Russian Federation, Grant 074-U01, and by National Funding from the FCT-Fundacao para a Ciencia e a Tecnologia through the Pest-OE/EEI/LA0008/2013 Project.Diallo, O.; Rodrigues, JJPC.; Sene, M.; Lloret, J. (2013). Distributed Database Management Techniques for Wireless Sensor Networks. IEEE Transactions on Parallel and Distributed Systems. PP(99):1-17. https://doi.org/10.1109/TPDS.2013.207S117PP9

Is it just a score? Understanding Training Load Management Practices Beyond Sports Tracking

Training Load Management (TLM) is crucial for achieving optimal athletic performance and preventing chronic sports injuries. Current sports trackers provide runners with data to manage their training load. However, little is known about the extent and the way sports trackers are used for TLM. We conducted a survey (N=249) and interviews (N=24) with runners to understand sports tracker use in TLM practices. We found that runners possess some understanding of training load and generally trust their trackers to provide accurate training load-related data. Still, they hesitate to strictly follow trackers’ suggestions in managing their training load, often relying on their intuitions and body signals to determine and adapt training plans. Our findings contribute to SportsHCI research by shedding light on how sports trackers are incorporated into TLM practices and providing implications for developing trackers that better support runners in managing their training load

A Vision and Framework for the High Altitude Platform Station (HAPS) Networks of the Future

A High Altitude Platform Station (HAPS) is a network node that operates in the stratosphere at an of altitude around 20 km and is instrumental for providing communication services. Precipitated by technological innovations in the areas of autonomous avionics, array antennas, solar panel efficiency levels, and battery energy densities, and fueled by flourishing industry ecosystems, the HAPS has emerged as an indispensable component of next-generations of wireless networks. In this article, we provide a vision and framework for the HAPS networks of the future supported by a comprehensive and state-of-the-art literature review. We highlight the unrealized potential of HAPS systems and elaborate on their unique ability to serve metropolitan areas. The latest advancements and promising technologies in the HAPS energy and payload systems are discussed. The integration of the emerging Reconfigurable Smart Surface (RSS) technology in the communications payload of HAPS systems for providing a cost-effective deployment is proposed. A detailed overview of the radio resource management in HAPS systems is presented along with synergistic physical layer techniques, including Faster-Than-Nyquist (FTN) signaling. Numerous aspects of handoff management in HAPS systems are described. The notable contributions of Artificial Intelligence (AI) in HAPS, including machine learning in the design, topology management, handoff, and resource allocation aspects are emphasized. The extensive overview of the literature we provide is crucial for substantiating our vision that depicts the expected deployment opportunities and challenges in the next 10 years (next-generation networks), as well as in the subsequent 10 years (next-next-generation networks).Comment: To appear in IEEE Communications Surveys & Tutorial