A layered fuzzy logic controller for nonholonomic car-like robot

A system for real time navigation of a nonholonomic car-like robot in a dynamic environment consists of two layers is described: a Sugeno-type fuzzy motion planner; and a modified proportional navigation based fuzzy controller. The system philosophy is inspired by human routing when moving between obstacles based on visual information including right and left views to identify the next step to the goal. A Sugeno-type fuzzy motion planner of four inputs one output is introduced to give a clear direction to the robot controller. The second stage is a modified proportional navigation based fuzzy controller based on the proportional navigation guidance law and able to optimize the robot's behavior in real time, i.e. to avoid stationary and moving obstacles in its local environment obeying kinematics constraints. The system has an intelligent combination of two behaviors to cope with obstacle avoidance as well as approaching a target using a proportional navigation path. The system was simulated and tested on different environments with various obstacle distributions. The simulation reveals that the system gives good results for various simple environments

Stabilization Control of the Differential Mobile Robot Using Lyapunov Function and Extended Kalman Filter

This paper presents the design of a control model to navigate the differential mobile robot to reach the desired destination from an arbitrary initial pose. The designed model is divided into two stages: the state estimation and the stabilization control. In the state estimation, an extended Kalman filter is employed to optimally combine the information from the system dynamics and measurements. Two Lyapunov functions are constructed that allow a hybrid feedback control law to execute the robot movements. The asymptotical stability and robustness of the closed loop system are assured. Simulations and experiments are carried out to validate the effectiveness and applicability of the proposed approach.Comment: arXiv admin note: text overlap with arXiv:1611.07112, arXiv:1611.0711

Design and implementation of a real-time autonomous navigation system applied to lego robots

Teaching theoretical concepts of a real-time autonomous robot system may be a challenging task without real hardware support. The paper discusses the application of the Lego Robot for teaching multi interdisciplinary subjects to Mechatronics students. A real-time mobile robot system with perception using sensors, path planning algorithm, PID controller is used as the case to demonstrate the teaching methodology. The novelties are introduced compared to classical robotic classes: (i) the adoption of a project-based learning approach as teaching methodology; (ii) an effective real-time autonomous navigation approach for the mobile robot. However, the extendibility and applicability of the presented approach are not limited to only the educational purpose

Design, Construction, Energy Modeling, and Navigation of a Six-Wheeled Differential Drive Robot to Deliver Medical Supplies inside Hospitals

Differential drive mobile robots have been the most ubiquitous kind of robots for the last few decades. As each of the wheels of a differential drive mobile robot can be controlled, it provides additional flexibility to the end-users in creating new applications. These applications include personal assistance, security, warehouse and distribution applications, ocean and space exploration, etc. In a clinic or hospital, the delivery of medicines and patients’ records are frequently needed activities. Medical personnel often find these activities repetitive and time-consuming. Our research was to design, construct, produce an energy model, and develop a navigation control method for a six-wheeled differential drive robot designed to deliver medical supplies inside the hospital. Such a robot is expected to lessen the workload of medical staff. Therefore, the design and implementation of a six-wheeled differential drive robot with a password-protected medicine carrier were presented. This password-protected medicine carrier ensures that only the authorized medical personnel can receive medical supplies. The low-cost robot base and the medicine carrier were built in real life. Besides the actual robot design and fabrication, a kinematic model for the robot was developed, and a navigation control algorithm to avoid obstacles was implemented using MATLAB/Simulink. The kinematic modeling is helpful for the robot to achieve better energy optimization. To develop the object avoidance algorithm, we investigated the use of the Robot Operating System (ROS) and the Simultaneous Localization and Mapping (SLAM) algorithm for the implementation of the mapping and navigation of a robotic platform named TurtleBot 2. Finally, using the Webot robot simulator, the navigation of the six-wheeled mobile robot was demonstrated in a hospital-like simulation environment

Autonomous Mobile Robot based on BehaviourBased Robotic using V-REP Simulator–Pioneer P3-DX Robot

This article describes the design and implementation of behavior-based robotic (BBR) algorithm on a wheeled mobile robot (WMR) Pioneer P3-DX in a maze exploration mission using V-REP simulator. This robot must trace and search for targets placed randomly on a labyrinth. After successfully meeting the objective, robot runs back to home position using the nearest path. Robot navigation system applies BBR algorithm to reach the target using behavior modules which work simultaneously to obtain the desired robot’s trajectory. The most fundamental behavior which is highly affordable to build on the robot system is a wall-following behavior. To make the robot could follow the wall in a safe, smooth and responsive condition, proportional-integral-derivative (PID) controller is applied. PID controller runs by utilizing the reading of sixteen proximity sensors carried on Pioneer P3-DX robot toward the expected wall distance while the robot is exploring the labyrinth. To ensure the designed system works properly, several tests were conducted, including BBR test and PID controller test. BBR test shows that the system can choose the shortest track when returning to home position. The PID controller test produces robot movement with maximum deviation and settling time for about 0.013 m and 30 seconds, respectively