Range Extension of Passive Wake-up Radio Systems through Energy Harvesting

Abstract—Use of a passive wake-up radio can drastically increase the network lifetime in a sensor network by reducing or even completely eliminating unnecessary idle listening. A sensor node with a wake-up radio receiver (WuRx) can operate in an extremely low power sleep mode until it receives a trigger signal sent by a wake-up radio transmitter (WuTx). After receiving the trigger signal, the attached WuRx wakes up the sensor node to start the data communication. In this paper, we implement and compare the performance of three passive wake-up radio-based sensor nodes: 1) WISP-Mote, which is a sensor mote that employs an Intel WISP passive RFID tag as the WuRx; 2) EH-WISP-Mote, which combines a novel energy harvester with the WISP-Mote; and 3) REACH-Mote, which uses the energy harvester circuit combined with an ultra-low-power pulse generator to trigger the wake-up of the mote. Experimental results show that the wake-up range and wake-up delay for the EH-WISP-Mote are improved compared with the WISP-Mote, while providing the ability to perform both broadcast-based and ID-based wake-ups. On the other hand, the REACH-Mote, which can only provide broadcast-based wake-up, can achieve a much longer wake-up range than any known passive wake-up radio to date, achieving feasible wake-up at a range of up to 37ft. I

MH-REACH-Mote: supporting multi-hop passive radio wake-up for wireless sensor network

A passive wake-up radio in a wireless sensor network (WSN) has the advantage of increasing network lifetime by using a wake-up radio receiver (WuRx) to eliminate unnecessary idle listening. A sensor node equipped with a WuRx can operate in an ultra-low-power sleep mode, waiting for a trigger signal sent by the wake-up radio transmitter (WuTx). The passive WuRx is entirely powered by the energy harvested from radio transmissions sent by the WuTx. Therefore, it has the advantage of not consuming any energy locally, which would drain the sensor node's battery. Even so, the high amount of energy required to wake up a passive WuRx by a WuTx makes it difficult to build a multi-hop passive wake-up sensor network. In this paper, we describe and discuss our implementation of a battery-powered sensor node with multi-hop wake-up capability using passive WuRxs, called MH-REACH-Mote (Multi-hop-Range EnhAnCing energy Harvester-Mote). The MH-REACH-Mote is kept in an ultra-low-power sleep mode until it receives a wake-up trigger signal. Upon receipt, it wakes up and transmits a new trigger signal to power other passive WuRxs. We evaluate the wake-up range and power consumption of an MH-REACH-Mote through a series of field tests. Results show that the MH-REACH-Mote enables multi-hop wake-up capabilities for passive WuRxs with a wake-up range of 9.4m while requiring a reasonable power consumption for WuTx functionality. We also simulate WSN data collection scenarios with MH-REACH-Motes and compare the results with those of active wake-up sensor nodes as well as a low power listening approach. The results show that the MH-REACH-Mote enables a longer overall lifetime than the other two approaches when data is collected infrequently.Peer ReviewedPostprint (author's final draft

Implementation of a Wake-up Radio Cross-Layer Protocol in OMNeT++ / MiXiM

This paper presents the DoRa protocol, which is a new cross-layer protocol for handling the double radio of nodes in wake-up radio scenario. The implementation details in OMNET++/MiXiM are also given, with a focus on the implemented MAC layers. The main goal of the DoRa protocol is to reduce energy consumption in wireless sensor network, by taking full advantage of the passive wake-up scheme. The performance of the DoRa protocol is then evaluated and results are compared with B-MAC and IEEE 802.15.4 protocols.Comment: Published in: A. F\"orster, C. Minkenberg, G. R. Herrera, M. Kirsche (Eds.), Proc. of the 2nd OMNeT++ Community Summit, IBM Research - Zurich, Switzerland, September 3-4, 2015, arXiv:1509.03284, 201

MAC protocols with wake-up radio for wireless sensor networks: A review

The use of a low-power wake-up radio in wireless sensor networks is considered in this paper, where relevant medium access control solutions are studied. A variety of asynchronous wake-up MAC protocols have been proposed in the literature, which take advantage of integrating a second radio to the main one for waking it up. However, a complete and a comprehensive survey particularly on these protocols is missing in the literature. This paper aims at filling this gap, proposing a relevant taxonomy, and providing deep analysis and discussions. From both perspectives of energy efficiency and latency reduction, as well as their operation principles, state-of-the-art wake-up MAC protocols are grouped into three main categories: (1) duty cycled wake-up MAC protocols; (2) non-cycled wake-up protocols; and (3) path reservation wake-up protocols. The first category includes two subcategories: (1) static wake-up protocols versus (2) traffic adaptive wake-up protocols. Non-cycled wake-up MAC protocols are again divided into two classes: (1) always-on wake-up protocol and (2) radio-triggered wake-up protocols. The latter is in turn split into two subclasses: (1) passive wake-up MAC protocols versus (2) ultra low power active wake-up MAC protocols. Two schemes could be identified for the last category, (1) broadcast based wake-up versus (2) addressing based wake-up. All these classes are discussed and analyzed in this paper, and canonical protocols are investigated following the proposed taxonomy

Energy-Detecting Receivers for Wake-Up Radio Applications

In the energy-limited wireless sensor node applications, wake-up radios are required to reduce the average power consumption of the node. Energy-detecting receivers are the best fit for such low power operations. This thesis presents the energy-detecting receiver design; challenges; techniques to enhance sensitivity, selectivity; and multi-access operation. Self-mixers instead of the conventional envelope detectors are proposed and proved to be optimal for signal detection. A fully integrated wake-up receiver uses the self-mixer and time-encoded baseband signal processing to provide a sensitivity of -79.1dBm at 434MHz with 420pW of power, providing an 8dB better sensitivity at 10dB lower power consumption compared to the SoA. A novel approach using narrowband interferers as local oscillators will be presented to further enhance sensitivity and selectivity, effectively operating the energy-detector receiver as a direct down-conversion receiver. Additionally, a clockless continuous-time analog correlator will be introduced to enhance the selectivity to wide-band AM interferers. The architecture uses pulse-position-encoded analog signal processing with VCOs as integrators and pulse-controlled relaxation delays; it operates as a code-domain matched filter to de-spread asynchronous wake-up codes. This code-domain matched filtering also provides code-division multiple access (CDMA) for simultaneous wakeups. Additional enhancement in the link can be achieved using directional antennas, providing spatial gain and selectivity. Certain applications can leverage a nearby reflector similar to a Yagi antenna to enhance the directivity. A low power directional backscatter tag is proposed, it uses multiple antennas acting as a reflectarray by configuring constant phase gradients depending on the direction of arrival (DoA) of the signal. Thus, instead of harvesting energy, the same energy and the surrounding environment can be leveraged to enhance functionality (e.g. interferer as LO, using a backscatter tag on a wall) for low power operation. Innovations spanning both system and circuit architectures that leverage the ambient energy and environment to enable power-efficient solutions for next-generation wake-up radios are presented in this work

Безпроводові технології з низьким енергоспоживанням для систем Інтернету речей

Об'єктом дослідження є технології з низьким енергоспоживанням та технологія, що дозволяє збільшити енергоефективність систем. Метою роботи є аналіз систем Інтернету речей з низьким енергоспоживанням, а саме LoRa, NB-IoT, ZigBee, та аналіз методу зменшення енергоспоживання даних систем, що базується на технології Wake-Up Radio. Методом дослідження є теоретичне дослідження відомих систем Інтернет речей з низьким енергоспоживанням, покращення енергоспоживання завдяки технології Wake-Up Radio. Результатом виконання дипломної роботи проаналізовано особливості низького енергоспоживання декількох відомих технологій Інтернету речей, проаналізовано технологію зменшення енергоспоживання Wake-Up Radio. Галузь застосування: телекомунікації, Інтернет речей.The object of study is low-power technologies and technologies that increase the energy efficiency of the system. The purpose of the work is an analytical system of the Internet with low power consumption, namely LoRa, NB-IoT, ZigBee, and analysis of the method of reducing the data system based on Wake-Up Radio technologies The research method is a theoretical study of known systems of Internet of Things with low energy consumption, improvement of energy consumption using Wake-Up Radio technology. As a result of the thesis work, the features of low power consumption of several well-known Internet technologies are analyzed, the technology of reducing power consumption of Wake-Up Radio is analyzed. Field of application: telecommunications, Internet of Thing

Ultra-Low Power Wake-up Radio for 5G IoT

5G Internet of Things (5G IoT), which is currently under development by 3GPP, paves the way for connecting diverse categories of devices to the IoT via cellular networks. For battery-powered low-cost IoT devices, wake-up radio (WuR) appears as an eminent technique for prolonging the lifetime of such devices, thanks to its outstanding energy consumption performance. However, only some small-size battery-powered IoT devices are able to transmit to a cellular IoT base station (BS) directly. In this article, we present W2B-IoT, a prototype implementation of a WuR-based two-tier system, which bridges cellular IoT BS and WuR via a Bluetooth low energy (BLE)-enabled Android smartphone. Such a WuR-enabled IoT device features a current consumption of merely 390 nA and a response time of 95 ms for decoding a wake-up call.acceptedVersio

Poster Abstract: MagoNode++ - A Wake-Up-Radio-Enabled Wireless Sensor Mote for Energy-Neutral Applications

The combination of low-power design, energy harvesting and ultra-low-power wake-up radios is paving the way for perpetual operation of Wireless Sensor Networks (WSNs). In this work we present the MagoNode++, a novel WSN platform supporting energy harvesting and radio-triggered wake ups for energy- neutral applications. The MagoNode++ features an energy- harvesting subsystem composed by a light or thermoelectric harvester, a battery manager and a power manager module. It further integrates a state-of-the-art RF Wake-Up Receiver (WUR) that enables low-latency asynchronous communication, virtually eliminating idle listening at the main transceiver. Experimental results show that the MagoNode++ consumes only 2.8uA with the WUR in idle listening and the rest of the platform in sleep state, making it suitable for energy-constrained WSN scenarios and for energy-neutral applications

Wake-up radio-based data forwarding for green wireless networks

This paper presents G-WHARP, for Green Wake-up and HARvesting-based energy-Predictive forwarding, a wake-up radio-based forwarding strategy for wireless networks equipped with energy harvesting capabilities (green wireless networks). Following a learning-based approach, G-WHARP blends energy harvesting and wake-up radio technology to maximize energy efficiency and obtain superior network performance. Nodes autonomously decide on their forwarding availability based on a Markov Decision Process (MDP) that takes into account a variety of energy-related aspects, including the currently available energy and that harvestable in the foreseeable future. Solution of the MDP is provided by a computationally light heuristic based on a simple threshold policy, thus obtaining further computational energy savings. The performance of G-WHARP is evaluated via GreenCastalia simulations, where we accurately model wake-up radios, harvestable energy, and the computational power needed to solve the MDP. Key network and system parameters are varied, including the source of harvestable energy, the network density, wake-up radio data rate and data traffic. We also compare the performance of G-WHARP to that of two state-of-the-art data forwarding strategies, namely GreenRoutes and CTP-WUR. Results show that G-WHARP limits energy expenditures while achieving low end-to-end latency and high packet delivery ratio. Particularly, it consumes up to 34% and 59% less energy than CTP-WUR and GreenRoutes, respectively