Hardware accelerated volume texturing.

The emergence of volume graphics, a sub field in computer graphics, has been evident for the last 15 years. Growing from scientific visualization problems, volume graphics has established itself as an important field in general computer graphics. However, the general graphics fraternity still favour the established surface graphics techniques. This is due to well founded and established techniques and a complete pipeline through software onto display hardware. This enables real-time applications to be constructed with ease and used by a wide range of end users due to the readily available graphics hardware adopted by many computer manufacturers. Volume graphics has traditionally been restricted to high-end systems due to the complexity involved with rendering volume datasets. Either specialised graphics hardware or powerful computers were required to generate images, many of these not in real-time. Although there have been specialised hardware solutions to the volume rendering problem, the adoption of the volume dataset as a primitive relies on end-users with commodity hardware being able to display images at interactive rates. The recent emergence of programmable consumer level graphics hardware is now allowing these platforms to compute volume rendering at interactive rates. Most of the work in this field is directed towards scientific visualisation. The work in this thesis addresses the issues in providing real-time volume graphics techniques to the general graphics community using commodity graphics hardware. Real-time texturing of volumetric data is explored as an important set of techniques in delivering volume datasets as a general graphics primitive. The main contributions of this work are; The introduction of efficient acceleration techniques; Interactive display of amorphous phenomena modelled outside an object defined in a volume dataset; Interactive procedural texture synthesis for volume data; 2D texturing techniques and extensions for volume data in real-time; A flexible surface detail mapping algorithm that removes many previous restrictions Parts of this work have been presented at the 4th International Workshop on Volume Graphics and also published in Volume Graphics 2005

Volume Modeling for Rapid Prototyping

The expanding workspace of Rapid Prototyping will draw on the new developments in geometric modeling. Volume modeling has substantial advantages over other modeling schemes to meet the emerging requirements of Rapid Prototyping technology. It provides us with a new approach to design complex geometry and topology. The integration of the volume modeling and Rapid Prototyping technology will help us to fully exploit RP's ability to fabricate objects with complex structures. This paper addresses our research and practice in a volume modeling system toward Rapid Prototyping. Novel techniques in volumetric data manipulation, NURBS volume models and triangular facet generation over solid models are presented. Computer models designed by this system and their corresponding DTM products are also shown atthe end of this paper.Mechanical Engineerin

Review of Non-destructive Testing (NDT) Techniques and their applicability to thick walled composites

A tier 1 automotive supplier has developed a novel and unique kinetic energy recovery storage system for both retro-fitting and OEM application for public transport systems where periodic stop start behaviour is paramount. A major component of the system is a composite flywheel spinning at up to 36,000 rpm (600 Hz). Material soundness is an essential requirement of the flywheel to ensure failure does not occur. The component is particularly thick for a composite being up to 30 mm cross section in some places. The geometry, scale and material make-up pose some challenges for conventional NDT systems. Damage can arise in composite materials during material processing, fabrication of the component or in-service activities among which delamination, cracks and porosity are the most common defects. A number of non-destructive testing (NDT) techniques are effective in testing components for defects without damaging the component. NDT techniques like Ultrasonic Testing, X-Ray, Radiography, Thermography, Eddy current and Acoustic Emission are current techniques for various testing applications. Each of these techniques uses different principles to look into the material for defects. However, the geometry, physical and material properties of the component being tested are important factors in the applicability of a technique. This paper reviews these NDT techniques and compares them in terms of characteristics and applicability to composite parts

Adaptive transfer functions: improved multiresolution visualization of medical models

The final publication is available at Springer via http://dx.doi.org/10.1007/s00371-016-1253-9Medical datasets are continuously increasing in size. Although larger models may be available for certain research purposes, in the common clinical practice the models are usually of up to 512x512x2000 voxels. These resolutions exceed the capabilities of conventional GPUs, the ones usually found in the medical doctors’ desktop PCs. Commercial solutions typically reduce the data by downsampling the dataset iteratively until it fits the available target specifications. The data loss reduces the visualization quality and this is not commonly compensated with other actions that might alleviate its effects. In this paper, we propose adaptive transfer functions, an algorithm that improves the transfer function in downsampled multiresolution models so that the quality of renderings is highly improved. The technique is simple and lightweight, and it is suitable, not only to visualize huge models that would not fit in a GPU, but also to render not-so-large models in mobile GPUs, which are less capable than their desktop counterparts. Moreover, it can also be used to accelerate rendering frame rates using lower levels of the multiresolution hierarchy while still maintaining high-quality results in a focus and context approach. We also show an evaluation of these results based on perceptual metrics.Peer ReviewedPostprint (author's final draft

Stereoscopic Sketchpad: 3D Digital Ink

--Context-- This project looked at the development of a stereoscopic 3D environment in which a user is able to draw freely in all three dimensions. The main focus was on the storage and manipulation of the ‘digital ink’ with which the user draws. For a drawing and sketching package to be effective it must not only have an easy to use user interface, it must be able to handle all input data quickly and efficiently so that the user is able to focus fully on their drawing. --Background-- When it comes to sketching in three dimensions the majority of applications currently available rely on vector based drawing methods. This is primarily because the applications are designed to take a users two dimensional input and transform this into a three dimensional model. Having the sketch represented as vectors makes it simpler for the program to act upon its geometry and thus convert it to a model. There are a number of methods to achieve this aim including Gesture Based Modelling, Reconstruction and Blobby Inflation. Other vector based applications focus on the creation of curves allowing the user to draw within or on existing 3D models. They also allow the user to create wire frame type models. These stroke based applications bring the user closer to traditional sketching rather than the more structured modelling methods detailed. While at present the field is inundated with vector based applications mainly focused upon sketch-based modelling there are significantly less voxel based applications. The majority of these applications focus on the deformation and sculpting of voxmaps, almost the opposite of drawing and sketching, and the creation of three dimensional voxmaps from standard two dimensional pixmaps. How to actually sketch freely within a scene represented by a voxmap has rarely been explored. This comes as a surprise when so many of the standard 2D drawing programs in use today are pixel based. --Method-- As part of this project a simple three dimensional drawing program was designed and implemented using C and C++. This tool is known as Sketch3D and was created using a Model View Controller (MVC) architecture. Due to the modular nature of Sketch3Ds system architecture it is possible to plug a range of different data structures into the program to represent the ink in a variety of ways. A series of data structures have been implemented and were tested for efficiency. These structures were a simple list, a 3D array, and an octree. They have been tested for: the time it takes to insert or remove points from the structure; how easy it is to manipulate points once they are stored; and also how the number of points stored effects the draw and rendering times. One of the key issues brought up by this project was devising a means by which a user is able to draw in three dimensions while using only two dimensional input devices. The method settled upon and implemented involves using the mouse or a digital pen to sketch as one would in a standard 2D drawing package but also linking the up and down keyboard keys to the current depth. This allows the user to move in and out of the scene as they draw. A couple of user interface tools were also developed to assist the user. A 3D cursor was implemented and also a toggle, which when on, highlights all of the points intersecting the depth plane on which the cursor currently resides. These tools allow the user to see exactly where they are drawing in relation to previously drawn lines. --Results-- The tests conducted on the data structures clearly revealed that the octree was the most effective data structure. While not the most efficient in every area, it manages to avoid the major pitfalls of the other structures. The list was extremely quick to render and draw to the screen but suffered severely when it comes to finding and manipulating points already stored. In contrast the three dimensional array was able to erase or manipulate points effectively while the draw time rendered the structure effectively useless, taking huge amounts of time to draw each frame. The focus of this research was on how a 3D sketching package would go about storing and accessing the digital ink. This is just a basis for further research in this area and many issues touched upon in this paper will require a more in depth analysis. The primary area of this future research would be the creation of an effective user interface and the introduction of regular sketching package features such as the saving and loading of images