Quasi-digital low-dropout voltage regulators uses controlled pass transistors

This article presents a low quiescent current output capacitorless quasi-digital CMOS LDO regulator with controlled pass transistors according to load demands. The pass transistor of the LDO is broken up to two smaller sizes based on a breakup criterion defined here, which considers the maximum output voltage variations to different load current steps to find the suitable current boundary for breaking up. This criterion shows that low load conditions will cause more output variations and settling time if the pass transistor is used in its maximum size. Therefore, using one smaller transistor for low load currents, and another one larger for higher currents, is the best trade-off between output variations, complexity, and power dissipation. The proposed LDO regulator has been designed and post-simulated in HSPICE in a 0.35 µm CMOS process to supply a load current between 0-100 mA while consumes 7.6 µA quiescent current. The results reveal 46% and 69% improvement on the output voltage variations and settling time, respectively.Postprint (published version

Multilevel multistate hybrid voltage regulator

In this work, a new set of voltage regulators as well as some controlling methods and schemes are proposed. While normal switched capacitor voltage regulators are easy integrable, they are suffering from charge sharing losses as well as fast degradation of efficiency when deviating from target operation point. On the other hand, conventional buck converters use bulky magnetic components that introduce challenges to integrate them on chip. The new set of voltage regulators covers the gap between inductor-based and capacitor-based voltage regulators by taking the advantages of both of them while avoiding or minimizing their disadvantages. The voltage regulator device consists of a switched capacitor circuit that is periodically switching its output between different voltage levels followed by a low pass filter to give a regulated output voltage. The voltage regulator is capable of converting an input voltage to a wide range of output voltage with a high efficiency that is roughly constant over the whole operation range. By switching between adjacent voltage levels, the voltage drop on the inductor is limited allowing for the use of smaller inductor sizes while maintaining the same performance. The general concept of the proposed voltage regulator as well as some operating conditions and techniques are explained. A phase interleaving technique to operate the multilevel multistate voltage regulator has been proposed. In this technique, the phases of two or more voltage levels are interleaved which enhances the effective switching frequency of the charge transferring components. This results in a further boost in the proposed regulator\u27s performance. A 4-level 4-state hybrid voltage regulator has been introduced as an application on the proposed concepts and techniques. It shows better performance compared to both integrated inductor-based and capacitor-based voltage regulators. The results prove that the proposed set of voltage regulators offers a potential move towards easing the integration of voltage regulators on chip with a performance that approaches that of off-chip voltage regulators

Optimal Power Flow with Step-Voltage Regulators in Multi-Phase Distribution Networks

This paper develops a branch-flow based optimal power flow (OPF) problem for multi-phase distribution networks that allows for tap selection of wye, closed-delta, and open-delta step-voltage regulators (SVRs). SVRs are assumed ideal and their taps are represented by continuous decision variables. To tackle the non-linearity, the branch-flow semidefinite programming framework of traditional OPF is expanded to accommodate SVR edges. Three types of non-convexity are addressed: (a) rank-1 constraints on non-SVR edges, (b) nonlinear equality constraints on SVR power flows and taps, and (c) trilinear equalities on SVR voltages and taps. Leveraging a practical phase-separation assumption on the SVR secondary voltage, novel McCormick relaxations are provided for (c) and certain rank-1 constraints of (a), while dropping the rest. A linear relaxation based on conservation of power is used in place of (b). Numerical simulations on standard distribution test feeders corroborate the merits of the proposed convex formulation.Comment: This manuscript has been submitted to IEEE Transactions on Power System

VOLTAGE REGULATORS FOR LOCAL HEATING OF PIGLETS

The optimum air temperature in a pigsty for sows is 16-18 °C, but during the first days o f new born piglets life the temperature in their lairs ought to be 32...34 °C. Therefore the local warming for piglets is installed. The goal of the investigation was to measure the intensity o f heat irradiation under different kinds o f infra-red heaters, more often used on Latvia farms. An autonomous infra-red piglet warming systems have been developed. The experiment has showed, that during the first days o f piglets life the heater should be kept at the high, so that the irradiated area 0.3- 0.4 m2 has been. Gradually heaters have to be lifted up 3-4 times while.the warming area is 0.6-0.7 m2 in 40-45 days, when piglets are weaned. The temperature in a lair has to be regulated by change o f electric power of the heater. Several constructions of voltage regulators are worked out, which are able to ensure the temperature on the warmed surface automatically or manually, depending on the temperature in a pigsty and live mass of piglets. The automatic power regulation of the heaters decreases the consumption of electric energy more than 2 times

Clustering methods for the efficient voltage regulation in smart grids

In this paper, clustering methods are presented to enhance the stability of automatic voltage regulators using the efficient adjustment of their respective gains. The results show that implementations of some of the clustering algorithms provide better reliability and stability for the feedback-based voltage regulators as compared to the other methods, namely, a model predictive controller (MPC), a gaussian mixture model (GMM), a self-organizing mapping (SOM) and hierarchical clustering (HC) methods. Specifically, the K-Means clustering approach (KM) provided superior stability but a slower rise time of the output voltage of the voltage regulators as compared to the other methods. Furthermore, coordination of the clustering methods is tested for a 10 machine, 39 bus power grid system. The results show that the clustering approach could be applied to improve the efficiency of voltage regulation methods in smart grids and related cyber-physical systems

FPGA Design Techniques for Stable Cryogenic Operation

In this paper we show how a deep-submicron FPGA can be modified to operate at extremely low temperatures through modifications in the supporting hardware and in the firmware programming it. Though FPGAs are not designed to operate at a few Kelvin, it is possible to do so on virtue of the extremely high doping levels found in deep-submicron CMOS technology nodes. First, any PCB component, that does not conform with this requirement, is removed. Both the majority of decoupling capacitor types and voltage regulators are not well behaved at cryogenic temperatures, asking for an ad-hoc solution to stabilize the FPGA supply voltage, especially for sensitive applications. Therefore, we have designed a firmware that enforces a constant power consumption, so as to stabilize the supply voltage in the interior of the FPGA chip. The FPGA is powered with a supply at several meters distance, causing significant IR drop and thus fluctuations on the local supply voltage. To achieve the stabilization, the variation in digital logic speed, which directly corresponds to changes in supply voltage, is constantly measured and corrected for through a tunable oscillator farm, implemented on the FPGA. The method is versatile and robust, enabling seamless porting to other FPGA families and configurations.Comment: The following article has been submitted to Review of Scientific Instruments. If it is published, it will be available on http://rsi.aip.or

Reducing Voltage Volatility with Step Voltage Regulators: A Life-Cycle Cost Analysis of Korean Solar Photovoltaic Distributed Generation

To meet the United Nation’s sustainable development energy goal, the Korean Ministry of Commerce announced they would increase renewable energy generation to 5.3% by 2029. These energy sources are often produced in small-scale power plants located close to the end users, known as distributed generation (DG). The use of DG is an excellent way to reduce greenhouse gases but has also been found to reduce power quality and safety reliability through an increase in voltage volatility. This paper performs a life-cycle cost analysis on the use of step voltage regulators (SVR) to reduce said volatility, simulating the impact they have on existing Korean solar photovoltaic (PV) DG. From the data collected on a Korean Electrical Power Corporation 30 km/8.2 megawatts (MW) feeder system, SVRs were found to increase earnings by one million USD. SVR volatile voltage mitigation increased expected earnings by increasing the estimated allowable PV power generation by 2.7 MW. While this study is based on Korean PV power generation, its findings are applicable to any DG sources worldwide.11Nsciescopu