Comunicações avançadas com fibra óptica plástica

Nowadays, fiber to the Home/Curb/Building/Cabinet (FTTx) services that interconnect homes with a standard glass optical fiber cables to the core/access optical networks have brought the optical fiber at the doorsteps of our homes. However, the last few miles in home access network is still based on the limited bandwidth electronic component which supports by the cooper wires e.g. Cat-5, 6. The rapid growth of personal smart/mobile electronic devices with new developments such as video on demand, High Definition (HD) and three-Dimension (3D) television (TV), cloud computing, video conferences, etc. has been proposed new challenges for the next generation high bandwidth demand required for subscribers in home access network. In order to meet the more demanding expectations of the end user with new developments, it is necessary to improve the physical infrastructure of the existing in home networks in order to obtain the best ratio between quality of service and price of implementation. Plastic optical fibers (POFs) are point out as a promising transmission medium for short-range communication in compare to the “classic” single/multimode glass optical fibers and current cooper wire technology developments. The main advantages of POF are its easy to install, easy splicing and the possibility of using low cost optical transceivers, capability of being robust, and immunity to electromagnetic noise interference. However, the benefits of large-core POFs come at the expense of a less bandwidth and a higher attenuation than silica-based solution. The main objective of this doctoral dissertation is to explore the possibilities and develop low cost, short reach, high data rate POF-links for in home networks applications. This thesis investigates the use of multilevel modulation in particular, pulse amplitude modulation (PAM in combination of the receiver equalizer in order to overcome the bandwidth limitations of the graded index POFs. The possibility of the using multiple channels over a single fiber to increase the capacity of POF systems using commercially available multimode components is also analyzed in this dissertation. Moreover, a low cost Digitised radio signal over plastic fiber system is proposed and evaluated to deliver digital baseband data for wireline and wireless users in home access network. The deployment will be specified in terms of performance, maximum rates and any degradation that might appear in the network. Furthermore, the possibilities of the microstructured fibers in telecommunication application will be studied with main emphasis on their structural design. The photonic crystal fibers made of different highly nonlinear materials with different structures are optimized to achieve ultra-flat dispersion, high nonlinearity and low confinement loss over a broad range of wavelengths in the perspective of their usage in telecommunication applications.Hoje em dia, a possibilidade de a fibra óptica até casa (FTTH) para a transmissão simultânea de diferentes serviços como internet, telefone, televisão digital é uma realidade. No entanto, para satisfazer as expectativas mais exigentes do usuário final com novos desenvolvimentos, tais como vídeo sob demanda, de alta definição (HD) e tridimensional (3D) de televisão (TV), computação em nuvem, vídeo conferências, etc., é necessário melhorar a infra-estrutura física da existente em redes domésticas, a fim de obter a melhor relação entre a qualidade do serviço e preço de implementação. Fibra óptica de plástico (POF) é considerada um meio de transmissão promissor para comunicações de curto alcance, queando comparadas com a clássica fibra óptica de silica (tanto monomodo como multimodo) e com as tecnologias atuais baseadas em fio de cobre. As principais vantagens da POF encontramse na sua facilidade de instalação e conecção, possibilidade de uso de fontes e detectores de baixo custo, robustez e imunidade electromagnética. No entanto, o uso da POF de elevado diâmetro têm também desvantagens uma vez que esta oferece uma menor largura de banda e uma atenuação superior à fibra de sílica convêncional. Esta dissertação de doutoramento tem como principal objetivo explorar as possibilidades de desemvolvimento de componentes de baixo custo baseados em POF para redes de curto alcance, com alta taxa de transmisssão de dados. Esta tese investiga a utilização de vários formatos de modulação combinados com equalizador e receptor, de maneira a superar as limitações de largura de banda em sistemas de comunicação óptica de curto alcance. Em particular, a modulação em amplitude de impulso (PAM) é proposta e investigada a fim de aumentar a capacidade de tais sistemas. Além disso, a possibilidade de usar múltiplos canais, utilizando uma única fibra óptica, também conhecido por multiplexagem por divisão de comprimento de onda (WDM), será analisada neste trabalho. A viabilidade das tecnologias de redes de acesso tanto a nível individual como em sistemas WDM serão analisadas usando componentes multimodo disponíveis comercialmente. A implementação será especificada em termos de desempenho tanto a nível da taxas máximas de transmissão, bem como na degradação do sinal que possa ocorrer na rede. No capitulo 5 desta dissertação é apresentado sistema de radio através de fibra. Este tipo de sistemas permite a simplificação das estações base providenciando também uma elevada manutenção de custos. O principal objectivo deste estudo prende-se com a investigação do impacto da amostragem na preformance de digitalização de rádio através de fibra e também como a introdução de fibra óptica de plástico pode afetar o sistema. Além disso, a possibilidade da aplicação de fibras óticas microestruturadas em redes de telecomunicações serão estudadas com ênfase principal na sua concepção estrutural. As fibras de cristal fotônico feitas de diferentes materiais altamente não-lineares com diferentes estruturas serão otimizadas a fim de alcançar uma dispersão ultra-plana, elevada não linearidade e baixa perda de confinamento em uma vasta gama espectral, na perspectiva de seu uso em aplicações de telecomunicações.Programa Doutoral em Engenharia Eletrotécnic

Wavelength extension in speciality fibres

Since the invention of the laser and its first application, there has been an almost continuous stream of new applications - many of which require specific laser sources. These applications often require a laser source with a specific power, pulse duration, energy and wavelength. In some cases these demands are easily met, whilst in others they have proven rather more difficult to achieve. Traditionally, wavelength versatility has been limited to the regions for which rare earth or gas gain media are available. These lasers themselves can be used to generate other wavelengths through the nonlinear processes of second and third harmonic generation, as well as sum frequency generation. Despite all of this, there still exists a significant section of the visible and infrared spectrum for which no convenient sources exist. This thesis is concerned with the development of sources in these regions along with broadband sources covering significant portions of the spectrum by themselves. These new wavelengths are generated in a variety of speciality fibres using either nonlinear processes or new gain media doped into standard silica fibres. Three types of speciality fibre are used: low concentration bismuth doped fibre which provides gain in the 1.0-1.4 μm region; photonic crystal fibres; and very high (75%) concentration germanium fibres to generate a laser source at 2.1 μm based upon stimulated Raman scattering. Photonic crystal fibres provide high nonlinearities and controllable dispersion which enables the generation of broadband supercontinuum sources based upon the interaction of many nonlinear effects. Each source will be described in depth, with particular attention given to the underlying physics that gives rise to the source. Previous and current limitations will be examined and an outlook of the future development of such sources will be discussed

Fiber laser system for the detection of trace gas

The research presented in this thesis is on the development of a trace gas detection system based on intracavity absorption spectroscopy (ICAS). The developed system was capable of detecting nitrous oxide (N2O) and acetylene (C2H2) gas at sub-ppmv levels. The P (12) rotational line of N2O at ~1522.20 nm, and the R (5) and R (4) rotational lines of C2H2 at ~1522.22 nm were used for detection. A fiber Bragg grating was incorporated into the ICAS cavity to enhance the system sensitivity by allowing the selection of strong absorption lines for detection. By operating the fiber laser based ICAS system at threshold, multiple circulations of the amplified spontaneous emission inside the cavity enhanced the system detection sensitivity. Further, the laser wavelength contained multi-longitudinal modes, which improved the system sensitivity. The system sensitivity was explored for two intra-cavity gas cells: a multi-pass Herriott cell and a gas cell based on a hollow-core photonic crystal fiber (HC-PCF). The system operated at room temperature and a polarization-maintaining erbium-doped fiber was used as a saturable absorber to help eliminate mode hopping in the laser cavity

Advanced Wireless LAN

The past two decades have witnessed starling advances in wireless LAN technologies that were stimulated by its increasing popularity in the home due to ease of installation, and in commercial complexes offering wireless access to their customers. This book presents some of the latest development status of wireless LAN, covering the topics on physical layer, MAC layer, QoS and systems. It provides an opportunity for both practitioners and researchers to explore the problems that arise in the rapidly developed technologies in wireless LAN

III-V-on-silicon photonic devices for optical communication and sensing

In the paper, we review our work on heterogeneous III-V-on-silicon photonic components and circuits for applications in optical communication and sensing. We elaborate on the integration strategy and describe a broad range of devices realized on this platform covering a wavelength range from 850 nm to 3.85 μm

Nonlinearity in photonic crystal fibres

This thesis introduces the linear and nonlinear properties of photonic crystal fibre (PCF), describes the fabrication and characterisation of different PCFs, and demonstrates their applications to supercontinuum (SC) generation and single-photon sources. The linear properties of PCF include endlessly single-mode transmission, highly controllable dispersion and birefringence. These unique properties have made PCFs the best media to demonstrate all kinds of nonlinear effects such as self-phase modulation (SPM), cross-phase modulation (XPM), Raman effects, four-wave mixing and modulation instability (FWM and MI), and soliton effects. The combination of these nonlinear effects has led to impressive spectral broadening known as SC generation in PCFs. The intrinsic correlation of signal and idler photons from FWM has brought PCF to the application of single-photon generation. Four projects about SC generation were demonstrated. The first was visible continuum generation in a monolithic PCF device, which gave a compact, bright (-20 dBm/nm), flat and single-mode visible continuum source extending to short wavelength at 400 nm. The second was polarised SC generation in a highly bire-fringent PCF. A well linearly polarised continuum source spanning 450-1750 nm was achieved with >99% power kept in a single linear polarisation. This polarised continuum source was then applied to tuneable visible/UV generation in a BIBO crystal. The third was residual pump peak removal for SC generation in PCFs. The fourth was to design an all-fibre dual-wavelength pumping for spectrally localised continuum generation. Two projects about photon pair generation using FWM were then demonstrated. One was an all-fibre photon pair source designed in the telecom band for quantum communication. This source achieved >50% heralding efficiency which is the highest in fibre photon pair sources reported so far. Another one was to design birefringent PCFs for naturally narrow band photon pair generation in the Si SPAD high detection efficiency range. 0.122 nm bandwidth signal photons at 596.8 nm were generated through cross polarisation phase matched FWM in a weakly birefringent PCF pumped by a picosecond Ti:Sapphire laser at 705 nm in the normal dispersion regime.EThOS - Electronic Theses Online ServiceGBUnited Kingdo