Micro-motion estimation of maritime targets using pixel tracking in cosmo-skymed synthetic aperture radar data : an operative assessment

In this paper, we propose a novel strategy to estimate the micro-motion (m-m) of ships from synthetic aperture radar (SAR) images. To this end, observe that the problem of motion and m-m detection of targets is usually solved using synthetic aperture radar (SAR) along-track interferometry through two radars spatially separated by a baseline along the azimuth direction. The approach proposed in this paper for m-m estimation of ships, occupying thousands of pixels, processes the information generated during the coregistration of several re-synthesized time-domain and not overlapped Doppler sub-apertures. Specifically, the SAR products are generated by splitting the raw data according to a temporally small baseline using one single wide-band staring spotlight (ST) SAR image. The predominant vibrational modes of different ships are then estimated. The performance analysis is conducted on one ST SAR image recorded by COSMO-SkyMed satellite system. Finally, the newly proposed approach paves the way for application to the surveillance of land-based industry activities

Motion Compensation for Near-Range Synthetic Aperture Radar Applications

The work focuses on the analysis of influences of motion errors on near-range SAR applications and design of specific motion measuring and compensation algorithms. First, a novel metric to determine the optimum antenna beamwidth is proposed. Then, a comprehensive investigation of influences of motion errors on the SAR image is provided. On this ground, new algorithms for motion measuring and compensation using low cost inertial measurement units (IMU) are developed and successfully demonstrated

Radar Technology

In this book “Radar Technology”, the chapters are divided into four main topic areas: Topic area 1: “Radar Systems” consists of chapters which treat whole radar systems, environment and target functional chain. Topic area 2: “Radar Applications” shows various applications of radar systems, including meteorological radars, ground penetrating radars and glaciology. Topic area 3: “Radar Functional Chain and Signal Processing” describes several aspects of the radar signal processing. From parameter extraction, target detection over tracking and classification technologies. Topic area 4: “Radar Subsystems and Components” consists of design technology of radar subsystem components like antenna design or waveform design

Scanning Volcanoes by Synthetic Aperture Radar

A problem with synthetic aperture radar (SAR) is that due to the poor penetrating action of electromagnetic waves within solid bodies, the ability to observe through distributed targets is precluded. In this context, indeed, imaging is only possible on targets distribute on the scene surface. This work describes an imaging method based on the analysis of micro-motions present on volcanoes and generated by the underground Earth's heat. Processing the coherent vibrational information embedded on the single SAR image, in the single-look-complex configuration, the sound information is exploited, penetrating tomographic imaging over a depth of about 3 km from the Earth's surface. Measurement results are calculated by processing a SLC image from the COSMO-SkyMed Second Generation satellite constellation of the Vesuvius. Tomographic maps reveal the presence of the magma chamber, together with the main and the secondary volcanic conduits. This technique certainly paves the way for completely new exploitation of SAR images to scan inside the Earth's surface

Analyse temps-frequence et traitement des signaux RSO à haute résolution spatiale pour la surveillance des grands ouvrages d'art

The thesis is composed of two research axis. The first one consists in proposing time-frequency signal processing tools for frequency modulated continuous wave (FMCW) radars used for displacements measurements, while the second one consists in designing a spaceborne synthetic aperture radar (SAR) signal processing methodology for infrastructure monitoring when an external point cloud of the envisaged structure is available. In the first part of the thesis, we propose our solutions to the nonlinearity problem of an X-band FMCW radar designed for millimetric displacement measurements of short-range targets. The nonlinear tuning curve of the voltage controlled oscillator from the transceiver can cause a dramatic resolution degradation for wideband sweeps. To mitigate this shortcoming, we have developed two time warping-based methods adapted to wideband nonlinearities: one estimates the nonlinear terms using the high order ambiguity function, while the other is an autofocus approach which exploits the spectral concentration of the beat signal. Onwards, as the core of the thesis, we propose a novel method for scattering centers detection and tracking in spaceborne SAR images adapted to infrastructure monitoring applications. The method is based on refocusing each SAR image on a provided 3D point cloud of the envisaged infrastructure and identifying the reliable scatterers to be monitored by means of four dimensional (4D) tomography. The refocusing algorithm is compatible with stripmap, spotlight and sliding spotlight SAR images and consists of an azimuth defocusing followed by a modified back-projection algorithm on the given set of points which exploits the time-frequency structure of the defocused azimuth signal. The scattering centers of the refocused image are detected in the 4D tomography framework by testing if the main response is at zero elevation in the local elevation-velocity spectral distribution. The mean displacement velocity is estimated from the peak response on the zero elevation axis, while the displacements time series for detected single scatterers is computed as double phase difference of complex amplitudes.Finally, we present the measurement campaigns carried out on the Puylaurent water-dam and the Chastel landslide using GPS measurements, topographic surveys and laser scans to generate the point clouds of the two structures. The comparison between in-situ data and the results obtained by combining TerraSAR-X data with the generated point clouds validate the developed SAR signal processing chain.Cette thèse s'articule autour de deux axes de recherche. Le premier axe aborde les aspects méthodologiques liés au traitement temps-fréquence des signaux issus d'un radar FMCW (à onde continue modulée en fréquence) dans le contexte de la mesure des déplacements fins. Le second axe est dédié à la conception et à la validation d'une chaîne de traitement des images RSO (radar à synthèse d'ouverture) satellitaire. Lorsqu'un maillage 3D de la structure envisagée est disponible, les traitements proposés sont validés par l'intercomparaison avec les techniques conventionnelles d'auscultation des grands ouvrages d'art.D'une part, nous étudions la correction de la non-linéarité d'un radar FMCW en bande X, à courte portée, conçu pour la mesure des déplacements millimétriques. La caractéristique de commande non linéaire de l'oscillateur à large bande, entraine une perte de résolution à la réception. Afin de pallier cet inconvénient, nous avons développé deux méthodes basées sur le ré-échantillonnage temporel (time warping) dans le cas des signaux à large bande non-stationnaires. La première approche estime la loi de fréquence instantanée non linéaire à l'aide de la fonction d'ambiguïté d'ordre supérieur, tandis que la deuxième approche exploite la mesure de concentration spectrale du signal de battement dans un algorithme d'autofocus radial.D'autre part, nous proposons un cadre méthodologique général pour la détection et le pistage des centres de diffusion dans les images RSO pour la surveillance des grands ouvrages d'art. La méthode est basée sur la ré-focalisation de chaque image radar sur le maillage 3D de l'infrastructure étudiée afin d'identifier les diffuseurs pertinents par tomographie 4D (distance – azimut – élévation – vitesse de déformation). L'algorithme de ré-focalisation est parfaitement compatible avec les images RSO acquises dans les différents modes (« stripmap », « spotlight » et « sliding spotlight ») : dé-focalisation en azimut suivie par rétroprojection modifiée (conditionnée par la structure temps-fréquence du signal) sur l'ensemble donné des points. Dans la pile d'images ré-focalisées, les centres de diffusion sont détectés par tomographie 4D : test de conformité à l'hypothèse d'élévation zéro dans le plan élévation – vitesse de déformation. La vitesse moyenne correspond au maximum à l'élévation zéro, tandis que la série temporelle des déplacements est obtenue par double différence de phase des amplitudes complexes pour chaque diffuseur pertinent.Nous présentons également les campagnes in situ effectuées au barrage de Puylaurent (et glissement de Chastel) : les relevés GPS, topographiques et LIDAR sol employées au calcul des maillages 3D. La comparaison entre les déplacements mesurés in situ et les résultats obtenus par l'exploitation conjointe de la télédétection RSO satellitaires et les maillages 3D valident la chaîne de traitement proposée.Teza cuprinde două axe principale de cercetare. Prima axă abordează aspecte metodologice de prelucraretimp-frecvenţă a semnalelor furnizate de radare cu emisie continuă şi modulaţie de frecvenţă (FMCW)în contextul măsurării deplasărilor milimetrice. În cadrul celei de-a doua axe, este proiectată şi validatăo metodă de prelucrare a imaginilor satelitare SAR (radar cu apertură sintetică) ce este destinatămonitorizării infrastructurii critice şi care se bazează pe existenţa unui model 3D al structurii respective.În prima parte a tezei, sunt investigate soluţii de corecţie a neliniarităţii unui radar FMCW în bandaX destinat măsurării deplasărilor milimetrice. Caracteristica de comandă neliniară a oscilatorului debandă largă determină o degradare a rezoluţiei în distanţă. Pentru a rezolva acest inconvenient, au fostelaborate două metode de corecţie a neliniarităţii, adaptate pentru semnale de bandă largă, ce se bazeazăpe conceptul de reeşantionare neuniformă sau deformare a axei temporare. Prima abordare estimeazăparametrii neliniarităţii utilizând funcţii de ambiguitate de ordin superior, iar cea de-a doua exploateazăo măsură de concentraţie spectrală a semnalului de bătăi într-un algoritm de autofocalizare în distanţă.În a doua parte a lucrării, este propusă o metodologie generală de detecţie şi monitorizare a centrilorde împrăştiere în imagini SAR în scopul monitorizării elementelor de infrastructură critică. Metoda sebazează pe refocalizarea fiecărei imagini radar pe un model 3D al structurii investigate în scopul identificăriicentrilor de împrăştiere pertinenţi (ţinte fiabile ce pot fi monitorizate în timp) cu ajutorul tomografiei SAR4D (distanţă-azimut-elevaţie-viteză de deplasare). Algoritmul de refocalizare este compatibil cu imaginiSAR achiziţionate în moduri diferite (« stripmap », « spotlight » şi « sliding spotlight ») şi constă într-odefocalizare în azimut urmată de o retroproiecţie modificată (condiţionată de structura timp-frecvenţă asemnalului) pe modelul 3D al structurii. Ţintele sunt identificate în stiva de imagini refocalizate cu ajutorultomografiei 4D prin efectuarea unui test de conformitate cu ipoteza că centrii de împrăştiere pertinenţivor avea elevaţie zero în planul local elevaţie-viteză. Viteza medie de deformare corespunde maximuluide pe axa de elevaţie nulă, iar seria temporară a deplasărilor se obţine printr-o dublă diferenţă de fază aamplitudinilor complexe corespunzătoare ţintelor identificate.În final sunt prezentate campaniile de măsurători pe teren efectuate la un baraj şi o alunecare de terendin regiunea Puylaurent (Franţa) destinate obţinerii modelului 3D al celor două elemente de infrastructurăprin măsurători GPS, topografice şi LIDAR. Comparaţia între deformările măsurate pe teren şi rezultateleobţinute prin combinarea imaginilor SAR cu modelele 3D au permis validarea metodologiei propuse

Hardware Development and Error Characterisation for the AFIT RAIL SAR System

This research is focussed on updating the Air Force Institute of Technology (AFIT) Radar Instrumentation Lab (RAIL) Synthetic Aperture Radar (SAR) experimental system. Firstly, this research assesses current hardware limitations and updates the system configuration and methodology to enable collections from a receiver in motion. Secondly, orthogonal frequency-division multiplexing (OFDM) signals are used to form (SAR) images in multiple experimental and simulation configurations. This research analyses, characterises and attempts compensation of relevant SAR image error sources, such as Doppler shift or motion measurement errors (MMEs). Error characterisation is conducted using theoretical, simulated and experimental methods. Final experimental results are presented to verify performance of the updated SAR collection system and show improvements to the final product through an updated methodology and various signal processing techniques

JERS-1 SAR and LANDSAT-5 TM image data fusion: An application approach for lithological mapping

Satellite image data fusion is an image processing set of procedures utilise either for image optimisation for visual photointerpretation, or for automated thematic classification with low error rate and high accuracy. Lithological mapping using remote sensing image data relies on the spectral and textural information of the rock units of the area to be mapped. These pieces of information can be derived from Landsat optical TM and JERS-1 SAR images respectively. Prior to extracting such information (spectral and textural) and fusing them together, geometric image co-registration between TM and the SAR, atmospheric correction of the TM, and SAR despeckling are required. In this thesis, an appropriate atmospheric model is developed and implemented utilising the dark pixel subtraction method for atmospheric correction. For SAR despeckling, an efficient new method is also developed to test whether the SAR filter used remove the textural information or not. For image optimisation for visual photointerpretation, a new method of spectral coding of the six bands of the optical TM data is developed. The new spectral coding method is used to produce efficient colour composite with high separability between the spectral classes similar to that if the whole six optical TM bands are used together. This spectral coded colour composite is used as a spectral component, which is then fused with the textural component represented by the despeckled JERS-1 SAR using the fusion tools, including the colour transform and the PCT. The Grey Level Cooccurrence Matrix (GLCM) technique is used to build the textural data set using the speckle filtered JERS-1 SAR data making seven textural GLCM measures. For automated thematic mapping and by the use of both the six TM spectral data and the seven textural GLCM measures, a new method of classification has been developed using the Maximum Likelihood Classifier (MLC). The method is named the sequential maximum likelihood classification and works efficiently by comparison the classified textural pixels, the classified spectral pixels, and the classified textural-spectral pixels, and gives the means of utilising the textural and spectral information for automated lithological mapping

An estimation-theoretic technique for motion-compensated synthetic-aperture array imaging

Thesis (Sc.D.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 2000.Vita.Includes bibliographical references (p. 351-354).Synthetic-Aperture Radar (SAR) is an imaging technique that achieves high azimuth resolution by using coherent processing to exploit the relative motion between an airborne or spaceborne radar antenna and the imaged target field (effectively synthesizing the effect of a larger aperture array). From an estimation-theoretic perspective, this thesis addresses the following limitations of conventional imaging techniques for the spotlight-mode version of SAR: sidelobe imaging artifacts and loss of resolution for stationary SAR scenes containing high-amplitude scatterers, and blurring and object-displacement artifacts in the presence of moving targets. First, this thesis presents a generalized estimation-theoretic SAR imaging framework which exploits the idea of L1-norm regularization. Some results are included which demonstrate the utility of this approach for reducing sidelobes and improving resolution for stationary SAR images. A parameterized L-norm-based moving-target imaging technique is also presented. For the case of a single moving target, this technique is able to compensate for the blurring due to temporally-constant velocity rigid-body motion (even if the target scatterers are closely-spaced). However, the motion-induced object-displacement compensation performance of this technique is significantly affected by velocity estimation errors. This thesis also presents an estimation-theoretic moving-target SAR imaging framework which uses a multi-dimensional matched-filter for computing a set of scatterer-velocity estimates which are used as initial conditions for an L1-norm-based estimation algorithm which assumes that the target scatterers have temporally-constant spatially-independent velocities. Therefore, this framework is able to image a moving target and nearby high-amplitude stationary clutter simultaneously. This framework also shows potential for imaging targets with non-rigid body motion. However, the motion-induced object-displacement compensation performance of this approach is significantly affected by cross-scatterer interference effects.by Cedric Leonard Logan.Sc.D

Advanced signal processing tools for ballistic missile defence and space situational awareness

The research presented in this Thesis deals with signal processing algorithms for the classification of sensitive targets for defence applications and with novel solutions for the detection of space objects. These novel tools include classification algorithms for Ballistic Targets (BTs) from both micro-Doppler (mD) and High Resolution Range Profiles (HRRPs) of a target, and a space-borne Passive Bistatic Radar (PBR) designed for exploiting the advantages guaranteed by the Forward Scattering (FS) configuration for the detection and identification of targets orbiting around the Earth.;Nowadays the challenge of the identification of Ballistic Missile (BM) warheads in a cloud of decoys and debris is essential in order to optimize the use of ammunition resources. In this Thesis, two different and efficient robust frameworks are presented. Both the frameworks exploit in different fashions the effect in the radar return of micro-motions exhibited by the target during its flight.;The first algorithm analyses the radar echo from the target in the time-frequency domain, with the aim to extract the mD information. Specifically, the Cadence Velocity Diagram (CVD) from the received signal is evaluated as mD profile of the target, where the mD components composing the radar echo and their repetition rates are shown.;Different feature extraction approaches are proposed based on the estimation of statistical indices from the 1-Dimensional (1D) Averaged CVD (ACVD), on the evaluation of pseudo-Zerike (pZ) and Krawtchouk (Kr) image moments and on the use of 2-Dimensional (2D) Gabor filter, considering the CVD as 2D image. The reliability of the proposed feature extraction approaches is tested on both simulated and real data, demonstrating the adaptivity of the framework to different radar scenarios and to different amount of available resources.;The real data are realized in laboratory, conducting an experiment for simulating the mD signature of a BT by using scaled replicas of the targets, a robotic manipulator for the micro-motions simulation and a Continuous Waveform (CW) radar for the radar measurements.;The second algorithm is based on the computation of the Inverse Radon Transform (IRT) of the target signature, represented by a HRRP frame acquired within an entire period of the main rotating motion of the target, which are precession for warheads and tumbling for decoys. Following, pZ moments of the resulting transformation are evaluated as final feature vector for the classifier. The features guarantee robustness against the target dimensions and the initial phase and the angular velocity of its motion.;The classification results on simulated data are shown for different polarization of the ElectroMagnetic (EM) radar waveform and for various operational conditions, confirming the the validity of the algorithm.The knowledge of space debris population is of fundamental importance for the safety of both the existing and new space missions. In this Thesis, a low budget solution to detect and possibly track space debris and satellites in Low Earth Orbit (LEO) is proposed.;The concept consists in a space-borne PBR installed on a CubeSaT flying at low altitude and detecting the occultations of radio signals coming from existing satellites flying at higher altitudes. The feasibility of such a PBR system is conducted, with key performance such as metrics the minimumsize of detectable objects, taking into account visibility and frequency constraints on existing radio sources, the receiver size and the compatibility with current CubeSaT's technology.;Different illuminator types and receiver altitudes are considered under the assumption that all illuminators and receivers are on circular orbits. Finally, the designed system can represent a possible solution to the the demand for Ballistic Missile Defence (BMD) systems able to provide early warning and classification and its potential has been assessed also for this purpose.The research presented in this Thesis deals with signal processing algorithms for the classification of sensitive targets for defence applications and with novel solutions for the detection of space objects. These novel tools include classification algorithms for Ballistic Targets (BTs) from both micro-Doppler (mD) and High Resolution Range Profiles (HRRPs) of a target, and a space-borne Passive Bistatic Radar (PBR) designed for exploiting the advantages guaranteed by the Forward Scattering (FS) configuration for the detection and identification of targets orbiting around the Earth.;Nowadays the challenge of the identification of Ballistic Missile (BM) warheads in a cloud of decoys and debris is essential in order to optimize the use of ammunition resources. In this Thesis, two different and efficient robust frameworks are presented. Both the frameworks exploit in different fashions the effect in the radar return of micro-motions exhibited by the target during its flight.;The first algorithm analyses the radar echo from the target in the time-frequency domain, with the aim to extract the mD information. Specifically, the Cadence Velocity Diagram (CVD) from the received signal is evaluated as mD profile of the target, where the mD components composing the radar echo and their repetition rates are shown.;Different feature extraction approaches are proposed based on the estimation of statistical indices from the 1-Dimensional (1D) Averaged CVD (ACVD), on the evaluation of pseudo-Zerike (pZ) and Krawtchouk (Kr) image moments and on the use of 2-Dimensional (2D) Gabor filter, considering the CVD as 2D image. The reliability of the proposed feature extraction approaches is tested on both simulated and real data, demonstrating the adaptivity of the framework to different radar scenarios and to different amount of available resources.;The real data are realized in laboratory, conducting an experiment for simulating the mD signature of a BT by using scaled replicas of the targets, a robotic manipulator for the micro-motions simulation and a Continuous Waveform (CW) radar for the radar measurements.;The second algorithm is based on the computation of the Inverse Radon Transform (IRT) of the target signature, represented by a HRRP frame acquired within an entire period of the main rotating motion of the target, which are precession for warheads and tumbling for decoys. Following, pZ moments of the resulting transformation are evaluated as final feature vector for the classifier. The features guarantee robustness against the target dimensions and the initial phase and the angular velocity of its motion.;The classification results on simulated data are shown for different polarization of the ElectroMagnetic (EM) radar waveform and for various operational conditions, confirming the the validity of the algorithm.The knowledge of space debris population is of fundamental importance for the safety of both the existing and new space missions. In this Thesis, a low budget solution to detect and possibly track space debris and satellites in Low Earth Orbit (LEO) is proposed.;The concept consists in a space-borne PBR installed on a CubeSaT flying at low altitude and detecting the occultations of radio signals coming from existing satellites flying at higher altitudes. The feasibility of such a PBR system is conducted, with key performance such as metrics the minimumsize of detectable objects, taking into account visibility and frequency constraints on existing radio sources, the receiver size and the compatibility with current CubeSaT's technology.;Different illuminator types and receiver altitudes are considered under the assumption that all illuminators and receivers are on circular orbits. Finally, the designed system can represent a possible solution to the the demand for Ballistic Missile Defence (BMD) systems able to provide early warning and classification and its potential has been assessed also for this purpose