A state-of-the-art review on torque distribution strategies aimed at enhancing energy efficiency for fully electric vehicles with independently actuated drivetrains

© 2019, Levrotto and Bella. All rights reserved. Electric vehicles are the future of private passenger transportation. However, there are still several technological barriers that hinder the large scale adoption of electric vehicles. In particular, their limited autonomy motivates studies on methods for improving the energy efficiency of electric vehicles so as to make them more attractive to the market. This paper provides a concise review on the current state-of-the-art of torque distribution strategies aimed at enhancing energy efficiency for fully electric vehicles with independently actuated drivetrains (FEVIADs). Starting from the operating principles, which include the "control allocation" problem, the peculiarities of each proposed solution are illustrated. All the existing techniques are categorized based on a selection of parameters deemed relevant to provide a comprehensive overview and understanding of the topic. Finally, future concerns and research perspectives for FEVIAD are discussed

A torque vectoring optimal control strategy for combined vehicle dynamics performance enhancement and electric motor ageing minimisation*

In this paper we propose a control architecture that combines velocity, sideslip angle and yaw rate regulation with motor temperature regulation on a electric vehicle with four independent electric motors. The linear controller incorporates both the vehicle dynamics and the electric motor dynamics by combining a four-wheel vehicle model with a motor degradation model. It is found that the resulting controller not only enhances the vehicle stability of the vehicle, but also extends the lifetime of motors by regulating their temperatures

Direct yaw-moment control of an in-wheel-motored electric vehicle based on body slip angle fuzzy observer

A stabilizing observer-based control algorithm for an in-wheel-motored vehicle is proposed, which generates direct yaw moment to compensate for the state deviations. The control scheme is based on a fuzzy rule-based body slip angle (beta) observer. In the design strategy of the fuzzy observer, the vehicle dynamics is represented by Takagi-Sugeno-like fuzzy models. Initially, local equivalent vehicle models are built using the linear approximations of vehicle dynamics for low and high lateral acceleration operating regimes, respectively. The optimal beta observer is then designed for each local model using Kalman filter theory. Finally, local observers are combined to form the overall control system by using fuzzy rules. These fuzzy rules represent the qualitative relationships among the variables associated with the nonlinear and uncertain nature of vehicle dynamics, such as tire force saturation and the influence of road adherence. An adaptation mechanism for the fuzzy membership functions has been incorporated to improve the accuracy and performance of the system. The effectiveness of this design approach has been demonstrated in simulations and in a real-time experimental settin

Optimal Torque Control for an Electric-Drive Vehicle with In-Wheel Motors: Implementation and Experiments

© SAE, Athari, A., Fallah, S., Li, B., Khajepour, A. et al., "Optimal Torque Control for an Electric-Drive Vehicle with In-Wheel Motors: Implementation and Experiments," SAE Int. J. Commer. Veh. 6(1):82-92, 2013, doi:10.4271/2013-01-0674.This paper presents the implementation of an off-line optimized torque vectoring controller on an electric-drive vehicle with four in-wheel motors for driver assistance and handling performance enhancement. The controller takes vehicle longitudinal, lateral, and yaw acceleration signals as feedback using the concept of state-derivative feedback control. The objective of the controller is to optimally control the vehicle motion according to the driver commands. Reference signals are first calculated using a driver command interpreter to accurately interpret what the driver intends for the vehicle motion. The controller then adjusts the braking/throttle outputs based on discrepancy between the vehicle response and the interpreter command. A test vehicle equipped with four in-wheel electric motors, vehicle sensors, communication buses, and dSPACE rapid prototyping hardware is instrumented and the control performance is verified through vehicle handling tests under different driving conditions.Automotive Partnership CanadaOntario Research FundGeneral Motor

Kinetic energy recovery and power management for hybrid electric vehicles

The major contribution of the work presented in this thesis is a thorough investigation of the constraints on regenerative braking and kinetic energy recovery enhancement for electric/hybrid electric vehicles during braking. Regenerative braking systems provide an opportunity to recycle the braking energy, which is otherwise dissipated as heat in the brake pads. However, braking energy harnessing is a relatively new concept in the automotive sector which still requires further research and development. Due to the operating constraints of the drivetrain architecture and the varying nature of the braking conditions, it is unlikely that all the stored kinetic energy of the vehicle can be recovered during braking.The research work in this thesis addresses the effect of braking conditions on kinetic energy recovery enhancement of the vehicle. The challenge in kinetic energy recovery enhancement lies in braking conditions, power/torque handling ability of the electric propulsion system, managing the dual braking systems, employed energy conversion techniques, and energy storage capacity. In this work a novel braking strategy is introduced to increase the involvement of the regenerative braking system, so as to increase the kinetic energy recovery while achieving the braking performance requirements. Initially mathematical modelling and simulation based analysis are presented to demonstrate the effects of braking power variation with respect to braking requirements. A novel braking strategy is proposed to increase the kinetic energy recovery during heavy braking events. The effectiveness of this braking strategy is analyzed using a simulation model developed in matlab- simulink environment. Anexperimental rig is developed to test various braking scenarios and their effects on kinetic energy recovery. A variety of braking scenarios are tested and results are presented with the analysis. At the end, suggestions are made to further continue this research in the future

On the enhancement of vehicle handling and energy efficiency of electric vehicles with multiple motors: the iCOMPOSE project

Electric vehicles with multiple motors allow torque-vectoring, i.e., the individual control of each powertrain torque. Torque-vectoring (TV) can provide: i) enhancement of vehicle safety and handling, via the generation of a direct yaw moment to shape the understeer characteristics and increase yaw and sideslip damping; and ii) energy consumption reductions, via appropriate torque allocation to each motor. The FP7 European project iCOMPOSE thoroughly addressed i) and ii). Theoretical analyses were carried out to design state-of-the art TV controllers, which were validated through: a) vehicle simulations; and b) extensive experimental tests, which were performed at rolling road facilities and proving grounds, using a Range Rover Evoque prototype equipped with four identical on-board electric powertrains. This paper provides an overview of the TV-related contributions of iCOMPOSE

Model-based powertrain design and control system development for the ideal all-wheel drive electric vehicle

The transfer case based all-wheel drive electric vehicle (TCAWDEV) and dual-axle AWDEV have been investigated to balance concerns about energy consumption, drivability and stability of vehicles. However, the mentioned powertrain architectures have the torque windup issue or the wheel skidding issue. The torque windup is an inherent issue of mechanical linked all-wheel drive systems. The hydraulic motor-based or the electric motor-based ideal all-wheel drive powertrain can provide feasible solutions to the mentioned issues. An ideal AWDEV (IAWDEV) powertrain architecture and its control schemes were proposed by this research; the architecture has four independent driving motors in powertrain. The IAWDEV gives more control freedoms to implement active torque controls and traction mode controls. In essence, this research came up with the distributed powertrain concept, and developed control schemes of the distributed powertrain to replace the transfer case and differential devices. The study investigated the dual-loop motor control, the hybrid sliding mode control (HSMC) and the neural network predictive control to reduce energy consumption and achieve better drivability and stability by optimizing the torque allocation of each dependent wheel. The mentioned control schemes were respectively developed for the anti-slip, differential and yaw stability functionalities of the IAWDEV powertrain. This study also investigated the sizing method that the battery capacity was estimated by using cruise performance at 3% road grade. In addition, the model-based verification was employed to evaluate the proposed powertrain design and control schemes. The verification shows that the design and controls can fulfill drivability requirements and minimize the existing issues, including torque windup and chattering of the slipping wheel. In addition, the verification shows that the IAWDEV can harvest around two times more energy while the vehicle is running on slippery roads than the TCAWDEV and the dual-axle AWDEV; the traction control can achieve better drivability and lower energy consumption than mentioned powertrains; the mode control can reduce 3% of battery charge depleting during the highway driving test. It also provides compelling evidences that the functionalities achieved by complicated and costly mechanical devices can be carried out by control schemes of the IAWDEV; the active torque controls can solve the inherent issues of mechanical linked powertrains; the sizing method is credible to estimate the operation envelop of powertrain components, even though there is some controllable over-sizing

INDEPENDENT TORQUE DISTRIBUTION MANAGEMENT SYSTEMS FOR VEHICLE STABILITY CONTROL

Vehicle Dynamics Control (VDC) systems, also called Electronic Stability Control (ESC) systems, are active on-board safety systems intended to stabilize the dynamics of vehicle lateral motion. In so doing, these systems reduce the possibility of the driver\u27s loss of control of the vehicle in some critical or aggressive maneuvers. One approach to vehicle dynamics control is the use of appropriate drive torque distribution to the wheels of the vehicle. This thesis focuses on particular torque distribution management systems suitable for vehicles with independently driven wheels. In conducting this study, a non-linear seven degree-of-freedom vehicle model incorporating a non-linear tire model was adopted and simulated in the MATLAB/SIMULINK environment. Using this model, various VDC torque management architectures as well as choices of feedback controllers were studied. For the purposes of upper level yaw stability control design, the desired or reference performance of the vehicle was obtained from the steady state bicycle model of the vehicle. To achieve the corrective yaw moment required for directional control, four torque distribution strategies were devised and evaluated. For each strategy, the following feedback control variables were considered turn by turn: 1) yaw rate 2) lateral acceleration 3) both yaw rate and lateral acceleration. Standard test maneuvers such as fish hook maneuver, the FMVSS 126 ESC test and the J-turn were simulated to evaluate the effectiveness of the proposed torque distribution strategies. Effects of road friction conditions, yaw-controller gains, and a driver emulation speed controller were also studied. The simulation results indicated that all VDC torque management strategies were generally very effective in tracking the reference yaw rate and lateral acceleration of the vehicle on both dry and slippery surface conditions. Under the VDC strategies employed, the sideslip angle of the vehicle remained very small and always below the steady-state values computed from reference bicycle model. This rendered separate side slip angle control unnecessary, for the test conditions and test vehicle considered. The study of the various proposed independent torque control strategies presented in this thesis is an essential first step in the design and selection of actuators for vehicle dynamics control with independent wheel drives. This is true for certain powertrain architectures currently being considered for pure Electric or Hybrid Electric and Hydraulic Hybrid Vehicles

A comprehensive study of key Electric Vehicle (EV) components, technologies, challenges, impacts, and future direction of development

Abstract: Electric vehicles (EV), including Battery Electric Vehicle (BEV), Hybrid Electric Vehicle (HEV), Plug-in Hybrid Electric Vehicle (PHEV), Fuel Cell Electric Vehicle (FCEV), are becoming more commonplace in the transportation sector in recent times. As the present trend suggests, this mode of transport is likely to replace internal combustion engine (ICE) vehicles in the near future. Each of the main EV components has a number of technologies that are currently in use or can become prominent in the future. EVs can cause significant impacts on the environment, power system, and other related sectors. The present power system could face huge instabilities with enough EV penetration, but with proper management and coordination, EVs can be turned into a major contributor to the successful implementation of the smart grid concept. There are possibilities of immense environmental benefits as well, as the EVs can extensively reduce the greenhouse gas emissions produced by the transportation sector. However, there are some major obstacles for EVs to overcome before totally replacing ICE vehicles. This paper is focused on reviewing all the useful data available on EV configurations, battery energy sources, electrical machines, charging techniques, optimization techniques, impacts, trends, and possible directions of future developments. Its objective is to provide an overall picture of the current EV technology and ways of future development to assist in future researches in this sector